Index Catalog // ScholarsArchive@OSU

Creator:: Martin, John P.
Abstract:: Aggregate piers have been used for centuries, with increasing occurrence in the last few decades. Their usage has been driven by land development demand and enabled through equipment and engineering improvements. Understanding the principles controlling bearing capacities and serviceability performance has been an ongoing area of interest for structures supported...
Resource Type:: Masters Thesis
Full Text:: ) sleeve friction, d) friction ratio (Rf = fs/qt) and e) Ic, with depth

Creator:: Bunn, Michael
Abstract:: Lateral spread is a pervasive type of liquefaction-induced ground failure that occurs on gentle slopes or near free-faces, such as river channels. Resulting horizontal displacements can reach up to several meters, and can be considerably damaging to foundations, bridges, roadways, pipelines, etc. In the 1990s, Bartlett and Youd (1992a, 1995)...
Resource Type:: Masters Thesis

Creator:: Jana, Amalesh
Abstract:: The seismic response of deep deposits of liquefiable and cyclic-softening susceptible soils has presented the geotechnical profession with significant engineering challenges. Strong ground motions may serve to soften soils under cyclic shear, trigger liquefaction, and produce damaging displacements as a consequence. This study improves the understanding of the in-situ, nonlinear,...
Resource Type:: Dissertation

Creator:: Zhang, Nan
Abstract:: Anchoring systems are used to hold floating offshore devices (e.g., energy devices, oil platforms) to keep them on their stations. Anchors are embedded into the seabed soils. In some cases, the interface shear between anchor and seabed soils together with anchor self-weight provide the holding capacity of the anchoring systems....
Resource Type:: Dissertation

Creator:: Huffman, Jonathan C.
Abstract:: Reliability-based geotechnical foundation design focusses on soil and structure analysis that meets necessary safety, performance and/or serviceability criteria, calibrated based on probabilistic analyses and an accepted level of risk. As the civil engineering community seeks to better harmonize geotechnical and structural design methodologies, reliability-based design is being incorporated more into...
Resource Type:: Dissertation
Full Text:: ........................................................270 7.26 Case 3 MCS. Probability of beam end rotation exceeding y for selected values of

Creator:: Donaldson, Aleyna M.
Abstract:: Strong ground motions from earthquakes can result in the reduction of the shear modulus and wave propagation characteristics of soils, and can produce liquefaction and cyclic softening during shaking and for some time following the seismic event. While the ground motions produced from controlled blasting are different than those in...
Resource Type:: Masters Thesis

Creator:: Li, Qiang
Abstract:: Drilled shaft foundations provide significant geotechnical resistance for support of structures, such as highway bridges, traffic sign, and signal pole structures, and are used widely to meet their structural foundation requirements. The amount of steel reinforcement in drilled shaft foundations has increased over the past several decades to account for...
Resource Type:: Dissertation
Date Created:
Full Text:: Assessment of Back-Calculated p-y Curves .....................................................270 9.8.1

ScholarsArchive@OSU