Incipient boiling and burnout heat fluxes were studied for sub-cooled forced convection annular flow. Small wires varying from 0.010
to 0.020 inch in diameter were used as the inner core of the annulus
and a one inch ID glass tube 24 inches long was used as the outer tube.
This...
An experimental study has been made of the local natural convective
heat transfer coefficient around the circumference of a heated
horizontal cylinder oscillating vertically in water. The heat transfer
surface consisted of a 1 3/8-inch diameter cylinder with a small test
section imbedded in its surface. This enabled data to...
Heat transfer from the inner wall of an annulus to subcooled
water in turbulent parallel flow was studied. The inner core of the
annulus consisted of wires varying from 0.0019 to 0.0197 inch in
diameter. The outer tube consisted of a 1.01 inch diameter glass
tube 24 inches long. Diameter...
The heat-transfer phenomena studied in this work were
associated with pool boiling from a flat horizontal surface facing
upward with the bulk liquid at its saturation temperature. The
analysis of boiling sound and the investigation of the transition boiling
mechanism constituted the essence of the present study.
The distinctively large...
An experimental investigation has been made of the effect of
vibration on heat transfer from a cylinder in crossflow. The
cylinder used was 3/16-inch in diameter and was sinusoidally
oscillated in the vertical direction by a mechanical drive mechanism
while immersed in an open water channel. Nominal amplitude
ratios, a/d,...