There are a number of well known techniques for extracting parallelism from a given program. They range from hardware implementations, building restructuring compilers or reorganizing of programs so as to specify all the available parallelism. The success rate of any of the known techniques is rather poor over all types...
The electrical behavior of on-chip interconnects has become a dominant factor in silicon-based high speed, RF, and mixed-signal integrated circuits. In particular, the frequency-dependent loss mechanisms in heavily-doped silicon substrates can have a large influence on the transmission characteristics of on-chip interconnects. To optimize the performance of the integrated circuit,...
The electrical performance of on-chip interconnects has become a limiting factor to the performance of modern integrated circuits including RFICs, mixed-signal circuits, as well as high-speed VLSI circuits due to increasing operating frequencies, chip areas, and integration densities. It is advantageous to have fast and accurate closed-form expressions for the...
Plastic packaging is a cost-effective solution for housing RF and microwave integrated circuits in low cost communication devices. While enabling low cost packaging of integrated circuits, plastic packages including the circuit ground patch (paddle) inside the package can have a significant parasitic effect on circuit performance. The purpose of this...
Variability in circuit performance due to process defects is a major concern in integrated circuit (IC) fabrication. Advanced IC manufacturing processes employ Chemical-Mechanical Polishing (CMP) for planarization of oxide and metal layers. CMP defects result in variations in the oxide and metal topographical profile. To reduce these topographical variations, electrically...
In cellular telephones, RF power amplifiers consume a significant part of the total phone current. Reducing the average PA current will extend battery life. In GSM systems the handset is commanded by the base station to transmit at power levels lower than full power much of the time. A Doherty...
For mmWave Integrated Circuit (IC) design, co-integration of passives can reduce size and power consumption, increase reliability, and reduce overall cost. However, skin and proximity effects in the metallization are aggravated at mmWave frequencies, resulting in increased attenuation and degradation of overall performance. Furthermore, tight integration of passive components (to...
A novel method for modeling bends in coplanar waveguides (CPWs) is described. The CPW can be viewed as a pair of parallel coupled quasi-slot lines. Bends in the CPW are modeled as a non-uniform coupled line system in terms of their even- and odd- mode characteristics. This modeling approach is...
Passive components, including spiral inductors and transformers, fabricated on silicon-based substrates are placing an increasing demand on radio-frequency integrated circuit (RFIC) design. Performance of the RFIC suffers from several non-ideal effects that must be taken into account in order to create a successful design. In particular, monolithic transformers can be...
Spiral inductors are a key component of mixed-signal and analog integrated circuits (IC's). Such circuits are often fabricated using silicon-based technology, owing to the inherent low-cost and high volume production aspects. However, semiconducting substrate materials such as silicon can have adverse effects on spiral inductor performance due to the lossy...