Index Catalog // ScholarsArchive@OSU

Design Automation for 3D Circuits

Creator:: Velayati, Mohammad
Abstract:: Traditional electronic systems are usually fabricated via printed circuit boards (PCBs). In a regular PCB, the electronic components are placed and mounted on a two-dimensional board. Such a component layout limits the freedom in the component placement process which results in larger electronic devices. With the use of Additive Manufacturing...
Resource Type:: Masters Thesis
Full Text:: circuit boards (PCBs). In a regular PCB, the electronic components are placed and mounted on a two

An experimental investigation of radiative and total heat transfer around a horizontal tube immersed in a high temperature gas-solid fluidized bed

Creator:: Alavizadeh, Seyed Nasser
Abstract:: This study is primarily concerned with the measurement of the local radiative component of total heat transfer around a horizontal tube immersed in a large particle fluidized bed at elevated temperatures.Total heat transfer was also measured in order to assess the relative radiation contribution.The radiation measurement probe employs a silicon...
Resource Type:: Dissertation
Full Text:: occur: packed, fluidized, bubbling, and slugging. These stages occur when the friction force acting on

Photonic Sintering of Nanoparticle Inks : Experimental Characterization, Computational Modeling and System Design for Additive Manufacturing

Creator:: MacNeill, William D.
Abstract:: Photonic sintering of nanoparticles is a relatively new process for sintering of nanoparticles, deposited on a substrate, into functional solid structures. The working principle of this process is the incidence of large-area broad-spectrum light onto deposited nanoparticles, which results in heat generation in the nanoparticles and their subsequent densification. Key...
Resource Type:: Masters Thesis
Full Text:: include rapid, scalable and ambient condition operation. For these reasons there is significant interest

Bi-level flexible-robust optimization for energy allocation problems

Creator:: Biswas, Arpan
Abstract:: A common problem in energy allocation problems is managing the trade-off between selling surplus energy to maximize short term revenue, versus holding surplus energy to hedge against future shortfalls. For energy allocation problems, this surplus represents resource flexibility and is quantified as the surplus energy after meeting the demand. The...
Resource Type:: Masters Thesis
Full Text:: shortfalls. For energy allocation problems, this surplus represents resource flexibility and is quantified

Effect of Shape on Nanoparticle Sintering: A Molecular Dynamics Study

Creator:: Mirkoohi, Elham
Abstract:: Sintering of nanoparticles to create films and patterns of functional materials is emerging as a key manufacturing process in applications like flexible electronics, solar cells and thin-film devices. Further, there is the emerging potential to use nanoparticle sintering to perform additive manufacturing as well. While the effect of nanoparticle size...
Resource Type:: Masters Thesis
Full Text:: key challenge in these sintering processes has been to control sintered material density and

A Permanent-Magnet Linear Generator Wave Energy Converter for Low Power Ocean Sensors

Creator:: Miles, Lillian F.
Abstract:: Renewable energy sources are becoming increasingly important due to their low environmental impact and limitless nature. This thesis explores the design of a 250 mW permanent magnet linear generator wave energy converter to power ocean sensors. While many wave energy converters exist, this is a unique application because the wave...
Resource Type:: Masters Thesis
Full Text:: their low environmental impact and limitless nature. This thesis explores the design of a 250 mW

Evaluation of the predictive capability of two-phase flow maps for microchannel condensation of R-134a at low mass flux conditions

Creator:: VanderPutten, Michael A.
Abstract:: Predicting condensation flow regimes and the associated heat transfer and pressure drop in microchannels is critical for designing terrestrial and space systems for heating, cooling, power generation, and advanced manufacturing. It is well established that in flows approaching the microscale (Dh < 1 mm) gravity-dominated flow regimes become less relevant,...
Resource Type:: Masters Thesis
Full Text:: and pressure drop. Review of these flow maps shows that at microscale channel diameters and low mass

Shocks and Awe : Damping Selection in Racecars to Maximize Grip

Creator:: Takaro, Trevor M. F.
Abstract:: This thesis covers the use of a quarter car model to select damping rates for aFormula Student (FS) car, focusing on minimizing vertical tire force variation to improvegrip. A 2 degree of freedom (DOF) quarter car model is cycled over the road frequenciesof interest and the results compared with the...
Resource Type:: Masters Thesis
Full Text:: cyclic road profile. These examples show linear springs with coefficient k and dampers c. Inerters

Adaptive Multiagent Traffic Management for Autonomous Robotic Systems

Creator:: Rebhuhn, Carrie
Abstract:: There is growing commercial interest in the use of unmanned aerial vehicles (UAVs) in urban environments, specifically for package delivery applications. However, the size, complexity and sheer numbers of expected UAVs makes conventional air traffic management that relies on human air traffic controllers infeasible. To enable UAVs to safely and...
Resource Type:: Dissertation
Full Text:: edges rather than a single edge. We divide these groups of edges into four cardinal directions, and

Offshore renewable energy : an exploration of techno-economic feasibility and reliability through a computational optimization perspective

Creator:: Clark, Caitlyn E.
Abstract:: Offshore renewable energy (ORE) has the potential to be a significant source of future global electricity production, reduce carbon emissions, decrease dependence on energy importation, and stimulate economic growth in coastal and remote areas. The availability and abundance of ORE, paired with growing coastal population centers, position offshore wind, wave,...
Resource Type:: Masters Thesis
Full Text:: , romantic, and very human that we indulge in these passionate pyrotechnics…it is possible that we may be

ScholarsArchive@OSU

Design Automation for 3D Circuits

An experimental investigation of radiative and total heat transfer around a horizontal tube immersed in a high temperature gas-solid fluidized bed

Photonic Sintering of Nanoparticle Inks : Experimental Characterization, Computational Modeling and System Design for Additive Manufacturing

Bi-level flexible-robust optimization for energy allocation problems

Effect of Shape on Nanoparticle Sintering: A Molecular Dynamics Study

A Permanent-Magnet Linear Generator Wave Energy Converter for Low Power Ocean Sensors

Evaluation of the predictive capability of two-phase flow maps for microchannel condensation of R-134a at low mass flux conditions

Shocks and Awe : Damping Selection in Racecars to Maximize Grip

Adaptive Multiagent Traffic Management for Autonomous Robotic Systems

Offshore renewable energy : an exploration of techno-economic feasibility and reliability through a computational optimization perspective

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search