Micro Powder injection molding (μPIM) is a cost-effective technique for
producing small, complex, precision parts in high volumes from ceramic and
metal nanoparticles. This study focuses on research conducted on fabrication of
Micro Ceramic Arrays (MCAs) parts using μPIM. MCAs are widely used as the
major components and design features...
Fischer-Tropsh Synthesis is a chemical process that converts CO and H₂ (syngas) into long stable hydrocarbon chains to use as fuel. This process suffers from large product distribution that requires expensive post processing. In this study, the reaction mechanism of hydrocarbon chain growth on Co is investigated on different surface...
Characterization of a microchannel solar thermal receiver for supercritical carbon dioxide (sCO₂) is presented. The receiver design is based on conjugate computational fluid dynamics and heat transfer simulations as well as thermo-mechanical stress analysis. Two lab scale receivers with a 2x2 cm² absorber area are fabricated and experimentally characterized -...
An experimental investigation into the behavior of micro-bubbles flowing
through a micro-channel has been conducted. Experiments were performed within a
rectangular micro-channel with dimensions of 5 cm x 13.2 mm x l30 jim. Bubbles
were generated in an electrolyte solution by electrolysis at the lower channel wall near
the inlet....
Hydrogen has been shown to be a promising replacement for fossil fuels for use in light duty vehicles because it is a clean, renewable and plentiful resource with a high gravimetric energy density. However, in order to obtain an acceptable volumetric energy density, densification of the hydrogen is required. Adsorptive...
Steam-methane reforming is a well understood industrial process used for generating hydrogen and synthesis gas. The reaction is generally carried out with residence times on the order of one second. By performing this reaction at microscales it is possible to take advantage of increased heat transfer rates and low diffusion...
In the vicinity of the pseudocritical point, supercritical carbon dioxide (sCO₂) undergoes a steep change in properties from “liquid-like” to “gas-like” as it is heated at a constant pressure. At the same time, there is a large spike in specific heat which can yield high heat transfer coefficients and heat...
A non-intrusive measurement technique for direct quantitative thermal visualization of channel wall temperatures in two phase microchannel flows using infrared thermography (IRT) is presented. Specifically, the measurement of top channel wall temperatures in a fractal-like branching microchannel silicon heat sink during flow boiling is demonstrated and thoroughly documented. Obtaining quantitative...
Sulfur content in fuels is an increasingly critical environmental issue. Hydrodesulfurization removes sulfur from hydrocarbons; however, further desulfurization is necessary in fuels. New methods are required. In this study, micro-scaled single phase oxidative desulfurization is explored. An ultraviolet light-assisted micro-reactor is introduced for desulfurization of dibenzothiophene.
Dibenzothiophene is mixed with...
Advances in electronics fabrication, coupled with the demand for increased computing power, have driven the demand for innovative cooling solutions to dissipate waste heat generated by these devices. To meet future demands, research and development has focused on robust and stable two-phase heat transfer devices. A confined impinging jet is...