Load-displacement characteristics and failure modes of metal-plateconnected wood truss joints are presented. Tension splice, heel, and web at the bottom chord joints are fabricated using southern pine (SP) no. 2 lumber and 20-gage punched metal plates. These joints are tested with a newly developed testing appratus that allows the testing...
Probability density functions (normal, lognormal, and three-parameter Weibull) were used to characterize strength data for three different types of metal-plate-connected wood truss joints (web at the bottom chord, tension splice, and heel). Modulus of elasticity (MOE) of the lumber used to fabricate the joints was also characterized. A probability-plot technique,...
Metal-plate-connected wood trusses with semi-rigid joints were investigated by the matrix method of structural analysis. The element-stiffness matrix and fixed-end forces of an individual member with one or both ends semi-rigid were derived as modifications of the idealized cases. The case of unequal elastic connections at two ends of a...
A procedure has been developed to optimize designs of metal-clad post-frame buildings using an expert system. The novel part of the study is the development of a procedure that extends the solution of an engineering problem from a conventional algorithmic Computer Aided Design (CAD) program to be used by the...
Ecological impacts of climate change in the Pacific Northwest may hinge on acclimation to drier summers, highlighting the importance of plant physiological studies in forests. Evaluating dominant forest plant species under old-growth and managed forest conditions is similarly important as timber harvest might change microclimates and alter drought effects on...
"This publication has presented an overview of current research on MPC joints in wood trusses. The literature search was primarily of U.S. sources, with some effort to obtain literature from other parts of the world. An enormous amount of important information has been amassed by studies on testing procedures and...
There are about 80 million single-family dwellings (SFDs) in the United States, predominantly of wood-frame construction. Of these, 68% are owner-occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all the houses in...
There are about 80 million single-family dwellings (SFD) in the United States,
predominantly of wood-frame construction. Of these, 68% are owner occupied. A home is
typically the largest single investment of a family, and is often not covered by earthquake
insurance, even where it is available. Of all the houses...
Thesis explores the ways in which Information and Communication Technology (ICT)use, specifically that of telephones and the Internet, impacts the lives of Eritrean refugees in Rome, Italy. Informal interviews, semi-structured interviews, and participant observation were carried out in a 'center of second reception.' Results show that information obtained through the...
Agrivoltaic systems combine solar energy and agriculture, promoting dual land use. Although grazing sheep in these systems is common, research on intentionally designed pastures to increase production is lacking. This study seeks to compare the herbage growth and lamb production in simple, diverse, and legume pastures in an agrivoltaic system...
Ten full size (3.7 x 4.9 m) plywood roof diaphragms were constructed using metal plate connected (MPC) common and hip wood trusses or joists, typical of single-family dwelling (SFD) construction. The specimens included three gable roof slopes of 33, 67 and 100%, a hip roof of 33% slope, and a...
There are about 80 million single-family dwellings (SFD) in the United States, predominantly of wood-frame construction. Of these, 68% are owner occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all SFD in...
Ten full-size (3.7×4.9m) plywood roof diaphragms were constructed using metal-plate-connected (MPC) common and hip wood trusses or joists, typical of single-family dwelling (SFD) construction. The specimens included three gable roof slopes of 33, 67, and 100%, a hip roof of 33% slope, and a flat roof, with a horizontal bottom...
A commercially available, three-dimensional finite-element analysis software was used to model the load-displacement
behavior of metal-plate-connected (MPC) joints in wooden trusses. Model features included consideration
of material properties, teeth-to-grain-to-direction-of-force orientation, wood-to-wood interaction, and gaps between wood
members. To simulate wood-to-plate interaction, the main feature of the model, each tooth of...
This analysis explores potential changes in the behavior of Oregon's Supplemental Nutrition Assistance Program (SNAP) participants after the 2008 recession. I examine this using individual-level administrative data from the State of Oregon in a linear probability model and a duration model. After controlling for a standard set of factors known...
The objective of this study was to examine vegetation and vegetation change in Eritrea over a period from the mid 1980s to 2002 using satellite remote sensing, and relate observed changes to the recent history of drought and war in the region. Specific objectives were (1) to examine vegetation change...
The level of polymorphisms of many biochemical and DNA markers are low in
cultivated sunflower (Helianthus annuus L.). The number of mapped public DNA
markers is limited. Molecular markers have not been developed for the most
important diseases of sunflower, such as downy mildew. The objectives of this
study were...
The objective of this research is to use a three-dimensional (3D) analysis
method to include 'system effects' directly in the design of light-frame roof truss
assemblies. The goal of this study is to develop an improved and practical method to
determine the structural performance of 3D roof truss assemblies used...
Agrivoltaic systems promote dual use of land by combining solar energy and agricultural production. Grazing sheep in these systems is popular but research on intentionally designed pastures to increase production is lacking. This study seeks to compare the herbage growth and lamb production in simple, diverse, and legume pasture mixes...
European hazelnut, Corylus avellana L., is the only economically important nut crop
in the family Betulaceae. One of the threats to the hazelnut industry in the Pacific
Northwest is the fungal disease eastern filbert blight (EFB) caused by the
pyrenomycete Anisogramma anomala. Host genetic resistance to EFB identified in the...
This study examines the association of household characteristics with forest product consumption and other benefits derived from community forest in Nepal. The analysis is based on random sample data of 80 households from a Community Forest User Groups of Baghmara Community Forestry (BCF) in Nepal. Using an OLS regression to...
Nepal’s community forestry has been internationally recognized as an example of successful case of collective action. However, many scholars argue that although it has been successful in protecting forests from degradation, it has not been able to create an inclusive platform for political decision-making process. Using historical analysis, comparative case...
Understanding the interplay between energy and water is central to effective natural resource management. With enough energy it is possible to secure sufficient water, with enough water it is possible to produce nearly boundless energy. The sun is the engine which drives the availability of both these resources; nearly every...