Jets in crossflow are used in a wide range of engineering applications and have been studied for more than 60 years. The transversal penetration and structure of a jet placed in a crossflow is known to be strongly three-dimensional. It is believed that, by using a pulsed jet inclined in...
A reduced-order dynamic model is derived that captures the primary dynamics of a jet-in-crossflow. This is significant progress toward the end goal of reduced order model based closed-loop flow control. The reduced order model is a set of differential equations obtained through the use of snapshot based Proper Orthogonal Decomposition...
A numerical model has been developed to simulate the firing of an inkjet printhead.
The model evaluates the heat generation and diffusion within the thin film structure, the
phase change and vapor bubble growth in the ink, and the subsequent flow of ink from the
orifice. The heat transfer is...
Gaseous transport through soil in the presence of soil
microorganisms has been investigated. More recently, modeling of
gaseous transport in the unsaturated zone has been investigated.
However, the problem of mathematical model of oxygen and carbon
dioxide transport through soil, as affected by the climatic
conditions, the transport of soil...
During the operation of phase-change ink-jet printers a bubble formation
phenomenon often occurs. These bubbles are detrimental to the operation of
the printer and substantial efforts are made to remove them. The objective of
this research was 1: to develop a fundamental understanding of how bubble or
void formation occurs...
This thesis presents an adaptive model reference controller for a highly
maneuverable high performance aircraft, in particular, a modified F18. An adaptive
controller is developed to maneuver an aircraft at a high angle of attack. Thus, the
aircraft is required to fly over a highly nonlinear flight regime. The adaptive...
Flow separation is an important phenomenon in fluid dynamics because of the effect it has on lift and drag on immersed bodies. Areas of swirl within a separated flow region may have a distinct effect on the surface forces, modifying the lift and drag characteristics. A correlation between the passage...
This thesis presents the design of various controllers for a highly maneuverable, high performance aircraft, namely the modified F-18. The aircraft was required to perform high angle-of-attack maneuvers, for which the aircraft behaves in as a highly nonlinear system. An adaptive PID controller was used to control the aircraft through...
Unmanned aerial vehicle (UAV) technology has grown out of traditional research and military applications and has captivated the commercial and consumer markets, showing the ability to perform a spectrum of autonomous functions. This technology has the capability of saving lives in search and rescue, fighting wildfires in environmental monitoring, and...