Index Catalog // ScholarsArchive@OSU

The effects of thermal processing on the mechanical properties of AA2024, 2014 and 2618 aluminum alloys

Creator:: Li, Xiao, 1963-
Abstract:: This study determined the independent effects of various homogenization cycles and precipitation treatments on the elevated temperature workability and the final ambient temperature mechanical properties of AA2024 aluminum alloy and on the T3 tensile properties of 2014 aluminum alloy as well as T6 tensile properties of 2618 and 2618 (Curich)...
Resource Type:: Masters Thesis
Full Text:: improve hot workability and mechanical properties of AA2024 aluminum alloy . In a previous study [12,13

Wrinkling of the facings of aluminum and stainless steel sandwich subjected to edgewise compression

Creator:: Forest Products Laboratory (U.S.), Jenkinson, Paul M., and Kuenzi, Edward W.
Abstract:: Information reviewed and reaffirmed in 1965. Original report issued December 1959.
Resource Type:: Technical Report
Full Text:: , 7075 T6 aluminum alloy, and 17-7PH(TH1050) stainless steel, on cores of 3003 H19 aluminum foil. The

Basic shear strength properties of metal-bonding adhesives as determined by lap-joint stress formulas of volkersen and goland and reissner

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report dated August 1955.
Resource Type:: Technical Report
Full Text:: tests were made of lap-joint specimens of clad 75S-T6 aluminum alloy with various lengths of overlap and

The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: Information reviewed and reaffirmed May 1959 and 1965. Report originally published June 1953.
Resource Type:: Technical Report
Full Text:: PROPERTIES CI STRUCTURAL METAL-IC-METAL ADHESIVES IN BONDS TO 24S-T3 ALUMINUM ALLOY Information Reviewed

Mechanical properties of Nb-Ti composite superconducting wires

Creator:: Liu, He
Abstract:: Mechanical properties of Nb-Ti composite superconducting wires were tested at room temperature. The results were analysed using simple composite theory, the rule of mixtures. The objective is to predict the mechanical properties of Nb-Ti superconducting composite wires as a function of volume ratio and geometry of the components, the composite...
Resource Type:: Masters Thesis
Full Text:: Mechanical properties of Nb-Ti composite superconducting

Mechanical properties of several honeycomb cores

Creator:: Stevens, Gordon H., Kuenzi, Edward W., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: aluminum alloy 5052E39 that were commercially available. Some exploratory work was also done on core

Compressive and shear properties of two configurations of sandwich cores of corrugated foil

Creator:: Forest Products Laboratory (U.S.) and Stevens, Gordon H.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: properties were determined for two configurations of sandwich cores of corrugated aluminum foil. The

Microstructural banding in thermally and mechanically processed titanium 6242

Creator:: Kansal, Utkarsh
Abstract:: Ti-6Al-2Sn-4Zr-2Mo-0.1Si specimens were shaped by repeated cycles of heating (to 954 °C) and hammer or press forging followed by a solution anneal that varied from 968 to 998 °C. The coupons were originally extracted from billets forged below the beta trans us ( 1009 °C) and slow cooled to ambient...
Resource Type:: Masters Thesis
Full Text:: in Mechanical EngineerinF, presented on January 21,1992. Title: Microstructural Banding in

Role of Stoichiometry on Ordering in Ni-Cr Alloys

Creator:: Teng, Fei
Abstract:: Mechanical property degradation due to isothermal ageing is of potential concern for alloys based on the Ni-Cr binary system (e.g., Inconel 690, 625), particularly in nuclear power applications where component lifetimes can exceed 40 years. In the present research, the disorder-order phase transformation, which is the primary mechanism of ageing,...
Resource Type:: Masters Thesis
Full Text:: Mechanical property degradation due to isothermal ageing is of potential concern for alloys based on the Ni

Effect of core thickness on shear properties of aluminum honeycomb core

Creator:: Forest Products Laboratory (U.S.), Jenkinson, Paul M., and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: was used was an expanded core of 3003-H19 aluminum alloy foil 0.0024 inch thick, which was bonded

ScholarsArchive@OSU

The effects of thermal processing on the mechanical properties of AA2024, 2014 and 2618 aluminum alloys

Wrinkling of the facings of aluminum and stainless steel sandwich subjected to edgewise compression

Basic shear strength properties of metal-bonding adhesives as determined by lap-joint stress formulas of volkersen and goland and reissner

The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy

Mechanical properties of Nb-Ti composite superconducting wires

Mechanical properties of several honeycomb cores

Compressive and shear properties of two configurations of sandwich cores of corrugated foil

Microstructural banding in thermally and mechanically processed titanium 6242

Role of Stoichiometry on Ordering in Ni-Cr Alloys

Effect of core thickness on shear properties of aluminum honeycomb core

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search