Timber engineering is currently in the midst of a significant evolution due to the rise of mass timber products, like cross-laminated timber (CLT). Increasing numbers of structural engineers are facing the challenge of designing lateral-force-resisting systems (LFRS) for multistory CLT structures. LFRS solutions such as steel frames, concrete cores, or...
In the last few decades new trends and innovations in wood products have emerged that are changing the way we can use this material in buildings. Additionally, wood is a material that has been touted to have many positive attributes in comparison to nonrenewable construction materials such as steel and...
The first goal of this master’s thesis was to investigate the linkage between a non-destructive testing method, surface resistivity, and premature concrete deterioration brought on by chloride ingress and or freeze-thaw cycling. The experimental method for this project consists of taking surface resistivity measurements of reinforced concrete slabs after they...
With growing awareness of the negative impacts of the built environment, solutions for dramatic environmental, economic, and social improvements are sparking in all sectors, especially within the construction industry. The work of this thesis aims to quantify and compare social, economic, and environmental impacts of a three-story mass timber structure...
With growing interest in mass timber, especially mass timber panels (MTP), there has been a need to better understand their structural properties. One of the most versatile uses for MTP are as floor systems. Under new code provisions, these floors can be utilized in new and taller building types, but...
A physical model study was performed to examine the forces and response of 1:6 scale wood-frame coastal residential structures subjected to storm surge and waves. An on-grade and an elevated specimen were tested and exposed to regular waves with varying water depths and wave heights to simulate Hurricane Sandy’s conditions....
To facilitate the design of Natural and Nature-Based Features (NNBF) for flood protection, this thesis expands an existing engineering design methodology to NNBF systems. The existing approach is a Level III reliability method for the performance-based design of traditional coastal engineering systems. The expanded methodology incorporates uncertainties inherent to both...
Reinforced concrete (RC) column-footing substructures are widely used to support bridges along critical transportation corridors in Oregon. Those built prior to 1971 were typically designed to resist only gravity loads. Therefore, they are vulnerable to damage or collapse during strong ground shaking. To prevent collapse, seismic retrofits have been developed...
This study investigates the microstructure and mechanical properties of an austenitic Oxide Dispersion Strengthened (ODS) steel produced by the Laser Directed Energy Deposition (LDED) process using powder feedstock atomized with elemental yttrium. The Microstructure of the samples was characterized by electron microscopy, and mechanical properties were measured using a tensile...
Thermal wave imaging (TWI), a technology based on heat conduction and radiation through materials, is a relatively new addition to current non-destructive inspections (NDI) systems. Bonding of composites, an extremely important step in manufacturing and repair of laminates, could be affected by defects originating from faulty manufacturing processes or damages...