This dissertation presents a phase domain in-loop-bandwidth spread-spectrum clock generation technique. In this proposed technique, a charge-based discrete-time loop filter is proposed to enable the phase domain in-loop-bandwidth spread-spectrum modulation without a delta-sigma modulator or time-to-digital converter. The in-loop-bandwidth modulation technique maximizes the loop bandwidth to improve phase noise suppression...
The evaluation of the stray-load losses in induction motors is an important part of the efficiency estimation process. However, stray-load losses have several components which are difficult to isolate and calculate. Consequently, they are more readily determined by test. IEEE Standard 112-1996 recommends the testing of electrical induction motors at...
This design of a Grid Friendly Electric Hot Water Heater Thermostat was built for the Electrical and Computer Engineering Senior Design course, ECE44x. The design enables hot water heaters to respond to imbalances in the grid seen through deviations from standard grid frequency by varying the power output to the...
For mmWave Integrated Circuit (IC) design, co-integration of passives can reduce size and power consumption, increase reliability, and reduce overall cost. However, skin and proximity effects in the metallization are aggravated at mmWave frequencies, resulting in increased attenuation and degradation of overall performance. Furthermore, tight integration of passive components (to...
Demands of today's integrated society dependent on communication systems have driven the creation of ever more efficient analog-to-digital converters. For the same reasons, digital circuitry has rapidly expanded to serve all the different systems and needs of consumers. The trend of technology development has been to make these digital circuits...
For today’s ubiquitous portable devices, innovative integrated circuits with high performance
yet very low power are necessary. As these devices are used to communicate and sense real world signals in the environment, analog-to-digital converters (ADC) and systems are the key interface circuits needed to digitize the sensed information and they...
As advanced wired and wireless communication systems attempt to achieve higher performance, the demand for high resolution and wide signal bandwidth in their associated ADCs is strongly increased. Recently, time-domain quantization has drawn attention from its scalability in deep submicron CMOS processes. Furthermore, there are several interesting aspects of time-domain...
Digitally controlled switching DC-DC converters have recently emerged as an attractive alternative to conventional switching converters based on analog control techniques. This research focuses on eliminating the issues associated with the state of the art switching converters by proposing three novel control techniques: (1) a digitally controlled Buck-Boost converter uses...
There is a significant need in recent mobile communication and wireless broadband
systems for high-performance analog-to-digital converters (ADCs) that have wide
bandwidth (BW>5-MHz) and high data rate (>100-Mbps). A delta-sigma ADC is
recognized as a power-efficient ADC architecture when high resolution (>12-b) is
required. This is due to several advantages...
Phase-locked loop (PLL) frequency synthesizers lie at the heart of most radio transceivers. An important objective of the electronics and communications industry is to design high-speed building blocks which dissipate the lowest possible power, and to ac- complish this with the cheapest technology. The dual-modulus prescaler is one of the...