The goals of this research were first to examine flame quenching in tubing smaller than the quench diameter, and then to place lower size limits on microcombustor and microreactor systems by studying a catalytic microcombustor burning propane. In the first set of experiments, flame quenching was examined as a function...
A microchannel heat exchanger was designed for diesel waste heat recovery and its performance was evaluated. The 21x15x8 cm unit was constructed from diffusion brazed stainless steel lamina and weighed 11 kg. Operating from a 13.4 kW generator with an exhaust temperature of 500 °C the unit delivered 11.1 kW...
Rising energy demands and the continual push to find more energy efficient technologies have been the impetus for the investigation of waste heat recovery techniques. Diesel engine exhaust heat utilization has the potential to significantly reduce the consumption of fossil fuels and reduce the release of greenhouse gases, because diesel...
The performance of a combined Stirling-ORC power cycle is evaluated, and an integrated microchannel heat exchanger is designed as an annular cold-side heat rejector for a free piston Stirling engine. Reasonable designs for a combined cycle can increased power output efficiency by 3 - 9% compared to that of a...
A swing arm compressor was designed, built, and tested as an undergraduate senior design
project for Dr. Richard Peterson. The system developed, while not functioning entirely as
desired, gave some initial data and a good base of knowledge for a second iteration of the
project. This thesis describes in detail...
Novel fluidic devices that utilize an array of microchannels to achieve their designed purpose are discussed. Examples of devices include: fuel reforming using Microreactors, chip cooling using microchannel heat sinks, and microchannel devices used for biological applications. The devices that have directly contributed to this research include: a microchannel water...
This study sought to ascertain the degree to which the night sky of Corvallis is affected by light pollution by determining the limiting visual magnitude. Defined as the brightness of the dimmest star that can be seen with the averted naked eye, the limiting visual magnitude establishes a quantitative standard...
The thermal wave technique has been explored for the use of liquid thermal conductivity measurement and flow property diagnostics in this dissertation. For liquid thermal conductivity measurements, an experimental technique based on the thermal wave approach is developed. A stainless steel strip functions as both a heating element and a...
Driven by the need for high energy-density power sources, demand has
stimulated the development of small-scale engines. A small-scale engine
with a fuel supply could replace batteries and utilize higher energy-density
liquid hydrocarbon fuels; such an advance could deliver a new age of
portable devices. Currently, operable small-scale engines exist;...
Techniques have been developed for measuring the
temperature, stable species concentrations, and atomic
radical concentrations during a transient combustion
event. They combine the features of direct sampling with
two spectroscopic techniques to produce relatively simple
diagnostic techniques to obtain time-resolved
measurements. In this study, a transient event was
provided by...