Collection contains scholarly output of student majors in the Oregon State University College of Forestry. http://hdl.handle.net/1957/7864 2013-05-16T20:45:07Z 2013-05-16T20:45:07Z Pickard, Brian R. http://hdl.handle.net/1957/37902 2013-03-28T22:46:21Z 2013-03-15T00:00:00Z

Keying forest stream protection to aquatic ecosystem values in multi-ownership watersheds Pickard, Brian R. Forested lands of western Oregon provide aquatic habitat for many fish and riparian dependent species, including a wide variety of salmon species. Current policies set riparian protections using fixed buffers on streams for federal and private lands based on stream type or size. These buffers can create a series of disjointed riparian protections, as federal lands require buffers that are much larger than private lands. In addition, the fixed buffer approach is neither flexible nor tailored to aquatic ecosystem values. This thesis presents a framework for comprehensively assessing stream networks using site specific watershed features and then suggests riparian conservation strategies that key stream and riparian protection to aquatic ecosystem values. Seven study watersheds were used in this analysis, totaling over 2.5 million acres of forested lands in western Oregon. Employing a set of geospatial tools, called NetMap, streams in each watershed were classified into higher and lower priorities using criteria of intrinsic potential, erosion/debris flow susceptibility, and thermal loading potential. Results demonstrated the inherent variability within and among watersheds based on the geomorphic and ecological processes determined important for selected salmon species. Within each watershed, both federal and non-federal lands had many miles of higher priority fish-bearing and non-fish bearing streams, suggesting the need for comprehensive, holistic watershed conservation strategies. Based on the partitioning of streams into higher and lower priorities, an alternative riparian conservation strategy was then modeled for federal lands that allocate protection on the basis of the ecological context of a stream segment’s potential and particular location while still meeting federal aquatic conservation goals and objectives. Possible increases to the land base for long-term timber production were then identified if this strategy were applied to federal Matrix lands. Results demonstrated that 8-30 percent of the current riparian buffers could be reallocated to the land base for long-term timber production. An additional 26-45 percent of current buffers could be managed simultaneously for both timber production and aquatic ecosystem goals. Results also provided a framework for targeting of conservation and restoration efforts towards higher priority streams within each watershed. As many of the most ecologically important streams were located on non-federal lands, riparian conservation policies focused on streams classified as higher priority on those lands may be needed to protect aquatic species and their environments. Graduation date: 2013

2013-03-15T00:00:00Z Becerra Ochoa, Fernando Amador http://hdl.handle.net/1957/37209 2013-02-28T00:02:34Z 2012-12-13T00:00:00Z

Evaluation of six tools for estimating woody biomass moisture content Becerra Ochoa, Fernando Amador Woody biomass transportation costs and market values/costs are strongly correlated with the woody biomass moisture content. Properly managing moisture content can potentially lead to economic and environmental advantages in biomass energy markets. Good management requires accurate moisture content measurements. Therefore, availability of accurate, precise, reliable, and efficient tools to assess woody biomass moisture content is essential. In this study, six different tools (Fibre-Gen HM200, IML Hammer, Humimeter BLW, Timbermaster, Humimeter HM1 and Wile Bio Meter) were evaluated. The six tools employed three different measurement technologies; acoustic, conductance, and capacitance. Woody biomass samples were collected over one season (summer 2011) at three different locations in western Oregon (Corvallis, Dallas, and Clatskanie) for three softwood species and three hardwood species: Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), Ponderosa pine (Pinus ponderosa L.), western hemlock (Tsuga heterophylla (Raf.) Sarg.), hybrid poplar (Populus spp.), Madrone (Arbutus spp.), and Garryana Oak (Quercus garryana Dougl. ex Hook). Twenty 3-meter long log (20 to 400mm diameter) specimens were collected per species; 18 specimens were divided into two different treatments (open vs. covered), and the two remaining specimens were chipped. In addition, approximately 100 kilograms per species of hogfuel (limbs and tops) were collected and chipped. Moisture content measurements of logs, chips, and hogfuel were made regularly over a four month period. These data was used to develop multiple linear regression models for assessing the moisture content of the six species using the six tools. The major factors considered in the regression models were species (6), treatment (2), and tools (6). The data were also used to estimate the sample size needed for each tool. The best tool from each technology type was identified. The results generated from this study show that (1) none of the tools are accurate without calibration for different species, (2) the best model/tool combination could only explain about 80% of the variability in measurements, (3) further product development is required in some cases to ensure that the tools are robust for industrial application, and (4) there is a wide range in efficiency of the tools (i.e., 50 minute tool efficiency range). The Fibre-Gen HM200 and Wile Bio Meter were the most accurate, precise and efficient tools tested. The cost of transporting woody biomass from the forest to woody biomass plants is "optimized" when the moisture content drops to approximately 30% (wet basis). Validation of the models developed for three of the tools tested (Fibre-Gen HM200, Humimeter BLW and the Wile Bio Meter) indicates that the tools are accurate below 35% MC (wet basis). This suggests they could be used for making threshold transportation decisions, i.e., determining when to haul. Graduation date: 2013

2012-12-13T00:00:00Z Hance, Dalton J. http://hdl.handle.net/1957/37207 2013-02-27T23:47:17Z 2013-01-11T00:00:00Z

Basin-scale variation in the spatial pattern of fall movement of juvenile coho salmon in the West Fork Smith River, Oregon Hance, Dalton J. from the summer dry season to the winter wet season. Such movement that connects summer and winter habitats may be particularly important for coho salmon, O. kisutch, because availability of overwintering habitat can limit freshwater survival for this species. Here, I describe basin-scale variability in the spatial pattern of fall movement for juvenile coho salmon between mainstem and tributary streams during the fall of 2002, 2003, 2004, and 2005. Juvenile coho salmon were tagged with a passive integrated transponder (PIT) and could be detected at five stationary detection sites, two located in perennial tributaries, two in intermittent tributaries, and one in the upper mainstem of the West Fork Smith River, Oregon. For each detection site, I compare the likelihood of detection during the fall by juvenile coho salmon from tagging locations over a multi-kilometer range of distances in each direction away from the tributary confluence. I developed logistic regression models with data from each detection site to estimate: 1) the relative likelihood of immigration into a tributary as compared to emigration out of the tributary, and 2) the relative likelihood of immigration into a tributary from the mainstem downstream of the tributary confluence as compared to immigration from the mainstem upstream of the confluence. For each pair of directions at each detection site, I also compare the change in the likelihood of detection with increasing distance for each direction. Overall, at the two upper-river detection sites, juvenile coho salmon were more likely to emigrate than to immigrate. At the remaining detection sites, juvenile coho salmon were no more likely to emigrate than immigrate. Of these detection sites, fish that immigrated into the mid-river perennial stream were more likely to come from the mainstem downstream of the confluence, whereas fish that immigrated into the two lower-river intermittent tributaries were more likely to come from the mainstem upstream of the confluence. Fall movement of juvenile coho salmon between tributary and mainstem habitat can occur over relatively long distances. This case study demonstrates variation among tributaries in the overall likelihood of emigration and immigration and in the source of immigrants from the mainstem, which may be related to spatial context that combines the physical characteristics and network position of tributary streams. The demonstrated variation in fall movement that connects summer and winter habitat within a stream network is a first step in exploring how complexity in movement interacts with the spatial arrangement and quality of seasonal habitats. More research on the causes of variation in the expression of fall movement will improve our understanding of how the spatial arrangement of habitat within a stream network influences the survival of juvenile coho salmon over the whole freshwater life cycle. Graduation date: 2013

2013-01-11T00:00:00Z Burnard, Michael D. http://hdl.handle.net/1957/36505 2013-01-31T00:12:45Z 2012-10-23T00:00:00Z

Key factors influencing checking in maple veneered decorative hardwood plywood Burnard, Michael D. Face checking in decorative maple veneered plywood panels is a significant problem for hardwood plywood manufacturers, furniture makers, cabinetmakers, and consumers. Efforts made by panel producers and researchers to minimize checking conducted to-­‐date have been limited, and produced contradictory results. In this study the impact of four manufacturing factors believed to contribute to check development in decorative maple veneer panels were determined. The factors investigated were face veneer thickness and preparation, lathe-­‐check orientation, adhesive and core type. An efficient, automated, optical technique based on digital image correlation principles was developed and used to detect and measure checks as they develop. The novel new method for characterizing check severity and development was effective in efficiently measuring checking for a substantial number of samples. The results of the factor screening analysis reveal intricate four way interactions between factor levels contribute to check development, and that some combinations are likely to exhibit much more checking than others. Graduation date: 2013

2012-10-23T00:00:00Z