On July 9th, the Pacific Marine Energy Center (PMEC) and PacWave hosted national and international experts from government, academia and industry, and across maritime sectors, to explore future research and testing opportunities associated with the development of the PacWave testing facilities. This report summarizes the findings from the strategic break-out...
The safety of coastal infrastructure has been a concern after the Indian Ocean Tsunami in 2004 and the Great East Japan Tsunami in 2011. The western coast of the United States is also exposed to tsunami hazards due to the Cascadia subduction zone. Therefore, it is critical to design coastal...
Cross-laminated timber (CLT) is an attractive building material because it is renewable, promotes fast installation, and possesses a high strength-to-weight ratio. The use of CLT in seismic applications has become increasingly common with the development of post-tensioned CLT rocking wall lateral force resisting systems (LFRS). The CLT pier-and-spandrel system designed,...
Roadway departure crashes accounted for 18,275 fatal crashes in 2017 across the United States (Jones et al. 2017). Rumble strips (RS) provide audible and haptic interior alert when a vehicle is departing the roadway reducing run-off-the road crashes. Although inexpensive to install, and easy to maintain, RS are not installed...
Despite numerous techniques for measuring and estimating water depth, bathymetry in the nearshore zone is notoriously difficult to map. Dangerous sea states, noisy environmental conditions, and expensive survey operations, particularly in remote areas, contribute to the difficulties of obtaining data along the coast. Global datasets, derived mainly from satellite altimetry...
Soil instability from tsunami hazards causes substantial damage to coastal infrastructure (e.g., the damage caused by the 2011 Great East Japan Tsunami, or the Heisei Tsunami). Tsunamis are unpredictable, so it is difficult to obtain field-scale measurements. Simulating tsunamis in a laboratory setting is therefore important to further understanding of...
The modeling and analysis of laboratory-generated nonlinear intermediate- to deep-water wave fields, using existing wavemaker theories and analysis tools, is one of the most challenging tasks in ocean science and engineering. On one hand, harmonics function (sine and cosine) -based wavemaker theories result in an inherent (linear) instability of the...
The growing contamination of surface water by stormwater runoff parallels increasing urban development. Heavy metals, polycyclic aromatic hydrocarbons (PAHs), persistent organic pollutants (POPs), and contaminants of emerging concern (CECs) are discharged from point sources and washed from impervious surfaces into surface waters, impacting the ecology of these systems, food supplies,...
Student engagement has been the focus of much engineering education research, in large part due to its ties to student learning. Widely considered to be a meta-construct, student engagement is often broken down into behavioral, emotional, and cognitive components. Reasons for ongoing research on student cognitive engagement are twofold: educators...
Situated cognition theory emphasizes the role that social and material contexts have on learning and knowledge application. Several studies of engineering workplace environments have noted differences between the social and material contexts of the workplace and those of undergraduate engineering education. No existing research has studied the social and material...
Unlike other industries, overall efficiency of construction projects has been growing minimally which directly causes cost overruns of projects. Though reducing idle time and increasing operational efficiency of construction equipment could result in significant cost saving, there is lack of practical knowledge of adjusting operational efficiency and integrating cost and...
In 2017, the cost of congestion in the United States was around 305 billion dollars, and city-dwellers, on average, lost 1400 dollars while sitting 42 hours in traffic jams. Aiming for better mobility and more efficient utilization of the transportation network, emerging connected and autonomous vehicle (CAV) technologies and their...
The goal of the first part of this project was to investigate the influence of aggregate source and entrained air on the transport properties of concrete. Currently, there are several ASTM standards available that provide systematic procedures to evaluate mass transport properties of concrete. ASTM C642-13 (ASTM 2013), often referred...
Landslides are a natural hazard that have major societal, economic, and
environmental impacts. The understanding of landslides begins with the observation that
they are a spatial problem. Spatial relationships have historically been explored with
maps, and landslides are no different. Such maps range in focus from inventory maps,
which identify...
The Large Wave Flume at the O.H. Hinsdale Wave Research Laboratory houses a piston wavemaker with a built-in active absorption system designed by MTS Systems Corporation. The performance of the active absorption system has not been properly assessed yet. This thesis evaluates the performance of the MTS active absorption system...
The workshop was funded by the National Science Foundation (NSF), OCE Division of Ocean Sciences (Award # 1817257). This report summarizes the key findings, outcomes, and recommendations of the workshop and serves as a draft of the comprehensive roadmap.
There are many aging bridges in service in the US and around the world that were not constructed to modern seismic design codes and standards. As a result, they are expected to perform poorly during intense earthquake ground shaking. Older reinforced concrete (RC) bridges, in particular, are often supported on...
With ever-increasing number of vehicles actively using the state and national roadway network, transportation-related fuel consumption and consequent pavement structural damage rises. In this dissertation, the impact of material-induced dissipated energy mechanisms in asphalt and concrete pavements were analyzed using field measurements in California and finite element modeling of pavement...
Numerical results are presented using a higher-order pseudo-spectral method in order to solve the Zakharov-Craig-Sulem formulation of the Euler model. We study the effects of variable bathymetry on weakly-dispersive, weakly-nonlinear, shallow water waves. Improved predictions on wave amplitude and shoaling behavior are developed by analytical means in the context of...
Unmanned aerial systems (UASs), more commonly known as drones, have recently achieved commercial success for many public and private applications. As with all emerging technologies, new safety concerns and conflicts with existing paradigms are likely to arise. Many potential applications of UASs will result in their operation near roadway infrastructure,...
Bridges are a vital component of transportation infrastructure in the United States, and the continual maintenance and preservation of bridges is critical to maintaining their structural capacity and maximizing service life. One of the most significant issues faced by concrete bridges is the infiltration of moisture from the roadway surface...
Coastal hazards are the result of numerous physical processes cumulatively causing water levels to flood and erode the land. The waves, storm surges, tides, and run-off contributing to elevated water levels are each the product of chaotic and random weather patterns. These stochastic weather patterns dissipate energy in Earth's climate...
This study evaluates the productivity and accuracy of surveys completed with single-base real-time kinematic (RTK) Global Navigation Satellite Systems (GNSS) using four different GNSS constellation combinations: (1) GPS-only, (2) GPS+GLONASS, (3) GPS+Galileo+BeiDou, and (4) GPS+GLONASS+Galileo+BeiDou. For this comparison, we set up a test site consisting of 20 stations ranging with...
The construction industry is a key contributor to the Gross Domestic Product (GDP) of many countries around the world and is valued at more than $10 trillion globally. Schedule, cost and quality are the main performance measures of construction projects. The primary goal for project stakeholders in the construction industry...
Strong ground motions from earthquakes can result in the reduction of the shear modulus and wave propagation characteristics of soils, and can produce liquefaction and cyclic softening during shaking and for some time following the seismic event. While the ground motions produced from controlled blasting are different than those in...
A series of laboratory experiments were conducted to study the wave field in the inner lagoon excited by ‘long’ incident waves. Three cases were considered: Cases A, B and C presenting incident waves of wavelength with factors of 1, 2 and 2.5 times the width of the reef respectively. The...
A challenge for municipal authorities of growing urban areas is to provide larger and faster transportation and utility networks that are safe and resilient to significant disruptions after an earthquake event and other disasters. Urban regions, like the San Francisco Bay or the Los Angeles area, are situated in seismically...
The dataset was generated as part of a study conducted by Oregon State University (OSU) and funded by the Oregon Department of Transportation (ODOT). The study, titled "Use of Blue Lights on Paving Equipment in Work Zones," was conducted from June to December 2018. The dataset includes vehicle speed and...
Asphalt concrete fatigue cracking is recognized as a major distress mode in the U.S. The widespread nature of this distress and the data from agency Pavement Management Systems (PMS) suggest that it is an issue with asphalt mixture design and production processes and is not a problem specific to certain...
The concept of construction industrialization, first raised in the 1960s, refers to the transfer of on-site construction work to an off-site factory to improve quality and reduce cost, time, and safety issues. In some countries, industrialization of construction projects is highly recommended and promoted by governments and local construction institutions...
For mid-rise and high rise buildings, slender reinforced concrete (RC) structural walls are commonly used as the main structural elements to resist lateral applied loads in high seismically areas around the globe. These RC structural walls can provide substantial deformation capacity, stiffness, and lateral strength through the contribution of their...
Bioretention facilities are emerging as a popular way to deal with stormwater runoff in urban environments and address its concerns. Real-time sensors installed in bioretention facilities aid in understanding the performance and feasibility of such facilities over time. A bioretention facility in Corvallis, Oregon was monitored for a study period...
Catastrophic earthquake and tsunami events that resulted in significant loss of life and property over the past two decades have raised the global awareness regarding the need to understand the response of communities and their built environment to multi-hazard extreme events. In recognition to this impending threat to the coastal...
Planning and management methods in construction need to constantly evolve to keep pace with the growing demand and complexity of work in increasingly competitive environments. This need for innovation and process improvement has attracted lean construction philosophy in industry management practice. Lean has been used in the construction industry to...
The two primary considerations for highway work-zones are its effect on commuter mobility and worker safety which are often spoken of together. However, it must be noted that they often conflict with each other. For example, traffic control plans that reduce travel speed in work-zones improve both commuter and worker...
Engineering practitioners solve problems in various ways; it is plausible that they often rely on graphs, figures, formulas and other representations to reach a solution. How and why engineering practitioners use representations to solve problems can characterize certain problem-solving behaviors, which can be used to determine particular types of problem...
The objective of this project was to investigate the performance of three different expansive additives on the hydration properties, volume change, and stress development of Portland cement pastes and concrete.
Modern geospatial data are frequently represented in some type of three-dimensional (3D) coordinate system, for example geodetic latitude, longitude, and ellipsoid height (φ, λ, h) derived from Global Navigation Satellite Systems (GNSS). But for engineering and surveying work, φ, λ, h coordinates are usually converted to a topocentric system consisting...
High early strength (HES) concrete is becoming increasingly used to repair damaged concrete pavement sections. The use of HES concrete enables the repaired pavement to be opened to traffic within hours of placing the concrete. A common approach used for the rapid repair of concrete pavement consists of closing a...
The constituent materials of concrete often contain chlorides. The presence of chlorides in sufficient amounts can disrupt the passive layer, also known as the passive film, that protects the reinforcing steel in concrete. This disruption can lead to premature corrosion of the reinforcing steel in concrete. To minimize the risk...
Unmanned aircraft systems (UAS), also known as drones, are an increasingly popular method of collecting surveying and mapping data. Two common drone-based mapping techniques are lidar and structure from motion (SfM) photogrammetry, and a frequently-heard (yet nearly impossible to answer) question is: “which is better?” The most common metric for...
Tack coat emulsion, comprised of asphalt binder, water and emulsifying agents, is an interlayer membrane applied before asphalt pavement construction, which helps pavement layers bond together and permeate stresses and strains induced by heavy wheel loads through the entire thickness of the pavement structure. Proper interlayer bonding aids in preventing...
The use of high strength steel reinforcement has the potential to provide economic and constructability benefits when used in reinforced concrete structures. However, more research is needed to justify and confidently allow its use. Current design provisions limit the nominal yield strength of reinforcing steel bars to 60 ksi (420...
The corrosion and passivity of iron (and carbon steel) in media with different alkalinity as well as iron depassivation have been studied extensively using electrochemical methods and nano-scale surface characterization studies. The electrochemical techniques provide valuable information about the average electrochemical behavior of relatively large metal surfaces, typically in centimeter-square...
Coastal communities in the U.S. Pacific Northwest (PNW) are rapidly engaging with the idea that hazards and environmental pressures are changing and may be characteristically different in the near future. This has led to a need for scientific knowledge and tools that can help coastal communities prepare and build resilience...
Bio-cementation is a promising method for the liquefiable mitigation of loose saturated sands. In the improvement process a bacterium that can be found naturally in soil deposits is fed urea. The bacterium consumes and breaks down the urea to form ammonium and carbonate. In the presence of calcium, calcium carbonate...
In the presence of strong winds, ocean surface waves dissipate significant amounts of energy by breaking. Here, breaking rates and wave-following turbulent dissipation rate measurements are compared with numerical WAVEWATCH III estimates of bulk energy dissipation. At high winds, the measurements suggest that turbulent dissipation becomes saturated, however the modeled...
This dissertation provides a comparison of statistical and econometric frameworks, using a previously unused freight data source, to study crash frequency by crash type and heavy-vehicle hard braking in Oregon. Hard braking can serve as a proxy for several factors, one of which is safety. Therefore, with the hard braking...
Recent statistics regarding large truck crashes reveal that fatality rates of large trucks per 100 million vehicle miles traveled (VMT) and fatality rates per 1,000 registered vehicles are higher than those for passenger vehicles. These statistics underscore the need for greater efforts by safety professionals to help mitigate the impacts...
Boulder transport models have been used to develop a historical record of hydrodynamic events. This is done by evaluating the size, location, and composition of boulders that have been removed from their region of formation. Boulder transport is difficult to predict, even under laboratory conditions.
Experiments were conducted to evaluate...
An understanding of natural coastal hazards is essential for improving resilience of coastal communities. Effective management of coastal hazards relies on prediction tools and mitigation structures that have been designed to handle the dynamic coastal system. This dissertation is a collection of manuscripts that cover a diverse range of fundamental...
The logarithmic-spiral (log-spiral) limit equilibrium procedure for slope stability analysis rigorously satisfies both force and moment equilibrium with a failure surface geometry formulated as a function of the soil’s angle of internal friction. Within the framework of limit equilibrium, this procedure has, in the past, been primarily limited to homogeneous...
Bridge inspection is a critical task needed to monitor bridge quality and serviceability. In the U.S., 40% of bridges are more than 50 years old while most bridges are typically designed for a lifespan of 50 years. 9.1% of the 614,387 bridges across the U.S are considered structurally deficient. These...
Fire hazards threaten human life and property safety. Since it is unrealistic to study human behavior during a real fire hazard, computational tools are a better choice to computational tools are a better choice to simulate fire growth and human behavior for predicting evacuation performance in chaotic emergency situations. Although...
As ecoroofs have become more widespread throughout the U.S., it has become increasingly important to understand their structural behavior. The purpose of this research was to investigate the load effects exerted on a roof structure with an ecoroof during rain events and the subsequent drainage period, with the intention of...
Decreases in pavement program funding levels have encouraged paving agencies to adopt higher levels of recycled materials into their asphalt mixes. In order to fully evaluate the effects of recycled asphalt pavement (RAP) in Hot Mix Asphalt (HMA) mixes, the level of blending between the RAP and virgin binders in...
Cementitious materials are often characterized through the use of advanced analytical techniques to understand the macro-, micro-, and nano-scale properties, including phase formation during hydration, and subsequent potential deterioration mechanisms which can affect service life. A major limitation with using such analytical techniques to quantify solid phases in cementitious systems...
The construction industry is infamously recognized for having jobsites identified as hazardous working environments due to workers-on-foot commonly functioning at dangerous heights and in close proximity to other construction entities, among other reasons. These hazardous operations result in an increased risk of worker injuries and fatalities caused by fall hazards...
Aggregate piers have been used for centuries, with increasing occurrence in the last few decades. Their usage has been driven by land development demand and enabled through equipment and engineering improvements. Understanding the principles controlling bearing capacities and serviceability performance has been an ongoing area of interest for structures supported...
Left turn movements are considered to be the highest risk movements through an intersection, and can result in head on, angle, or side impact crashes. The flashing yellow arrow (FYA) for use as a permissive left turn phasing indication is relatively recent, first appearing in the 2009 edition Manual on...
While sophisticated plans have been adopted nationally and globally to increase bicycling’s share of daily commutes, safety concerns have negatively impacted targeted bicycling growth. Specifically, truck traffic plays a pivotal role in bicyclists’ perceptions of safety and comfort, because of the severe consequences of bicycle-truck collisions. Several types of engineering...
Recent statistics suggest that the construction industry continues to experience poor project performance. Specifically, construction productivity has witnessed a meager annual growth of 1% over the past 20 years while the industry constantly records both a high number of fatalities and a high fatality rates relative to other industries. The...
Autonomous vehicles (AVs) may have the potential to mitigate a significant proportion of serious crashes which are due to human error or poor decision making behind the wheel. However, there are still many concerns associated with SAE Level 3 AVs that require intervention by a human driver after a take-over...
Distracted driving is an adverse driving behavior that is widely known to impair the safety of all roadway users and traffic flow. Despite the extensive research efforts on the prevalence and effects of distracted driving on roadway safety and performance, the number of vehicular crashes and fatalities resulting from distracted...
The advancement of the cutting-edge technologies of advanced driver assistance systems (ADAS) hold promises to reshape the future of the transportation system. The concept of connected (CV) and connected automated vehicles (CAV) technologies are live examples of the future transportation. Vehicle communication technology is expected to impact conventional traffic conditions....
Anchoring systems are used to hold floating offshore devices (e.g., energy devices, oil platforms) to keep them on their stations. Anchors are embedded into the seabed soils. In some cases, the interface shear between anchor and seabed soils together with anchor self-weight provide the holding capacity of the anchoring systems....
This research asserts that flood risk perception of individuals living in floodplains influences their preparedness for taking actions to protect themselves from flood hazards. The results of this research are backed up by quantitative analysis of survey responses of individuals living in floodplains of Corvallis, OR in the USA. The...
Chloride-induced corrosion is one of the primary causes of the degradation of reinforced steel in concrete structures. Currently, the rapid chloride permeability test (RCPT) is the most specified method to determine the concrete’s resistivity to chloride ingress, thus a determining factor in assessing the durability of concrete. While it is...
A sewer geyser is a series of ejecting air-water mixture eruptions through vertical shafts of drainage systems. In field observed geyser incidents, manhole covers were blown into the air and they were followed by ejecting air-water mixture eruptions that lasted for several seconds at a time. Trapped air in sewer...
In many undergraduate engineering programs, students do not synthesize content learned from multiple courses until a capstone senior design course. As an example, in undergraduate civil engineering programs, transportation engineering concepts (e.g., geometric alignment, asphalt design procedures) and geotechnical engineering concepts (e.g., shear strength of soils, soil compaction) are not...
The U.S. Pacific Northwest is home to one of the most extreme wave climates in the world with waves of 10 m in height arriving to the coast approximately each year. With an average water temperature of 12℃, the beaches in the region are too cold to go on a...
Total emissions from the US contribute 15% to the global emissions. The construction industry is a major source of the exhaust emissions produced. Use of light-duty vehicles and heavy-duty trucks for various construction activities contributes 83% to the total greenhouse gases produced. Construction equipment comprises of on-road and non-road equipment,...
With all of the efforts that have been conducted over the past 100 years since the first accident causation theory was published, the Accident Proneness theory by Vernon (1918), the construction still trails among different industries in terms of fatal and nonfatal work injuries. Theories and models that have been...
A significant number of Unreinforced Masonry (URM) buildings exist in the Pacific Northwest region of the United States of America that is a region of high seismicity, which could be subjected to both crustal and subduction zone earthquakes. The catastrophic and brittle failures associated with URM buildings in the past...
The role of ground motion duration on the seismic performance of civil engineering structures remains unclear. Thus, the role of earthquake strong ground motion duration is assessed in a three manuscript thesis, which includes: (1) assessment of the effects of ground motion duration on the seismic performance of a model...
Transportation systems are facing safety and operational challenges with a cost of billions of dollars annually in lost production time and wasted fuel. Infrastructure expansion, previously held as a panacea to most transportation challenges has lost its appeal due to financial, land-use and environmental constraints. Interest is surging in intelligent...
The capabilities of modern three-dimensional (3D) capture technology such as laser scanning and image-based 3D reconstruction are well suited to enhance the practice and research of civil engineering. However, given the often-overwhelming focus placed on the incredible capabilities of these tools and techniques, it is important to investigate the limitations...
Due to a general reduction in pavement program funding levels over the past decade, the current budget is not sufficient to maintain roadways at a high level of service with acceptable roughness levels. Rough roadways with poor ride quality increase drivers’ vehicle operating costs (fuel consumption, vehicle maintenance, and tire-wear)...
Ground failures, in particular landsliding, liquefaction and lateral spreading can be triggered by seismic sources. The frequency, magnitude, and impact of these ground failures are highly dependent on the topography and geology of the site including its slope, depositional environment, and geotechnical properties as well as the proximity of the...
The blast technique has been used as an effective soil improvement method to compact loose coarse-granular soils since 1930s, and the use of the blast technique is extended as an application of in-situ liquefaction testing to investigate the performance of full scale foundations and countermeasures against liquefaction in recent decades....
The first goal of this master’s thesis was to investigate the linkage between a non-destructive testing method, surface resistivity, and premature concrete deterioration brought on by chloride ingress and or freeze-thaw cycling. The experimental method for this project consists of taking surface resistivity measurements of reinforced concrete slabs after they...
Bicyclists are one of the highest and most vulnerable road users. This is due to the higher likelihood of being seriously injured when involved in a crash. This research seeks to understand two different behavioral interactions of an implemented facility user: the motorist (secondary user) and bicyclist (primary user). The...
Student engagement is key for learning in the classroom, and different levels of engagement have led to greater learning. The ICAP framework distinguishes these different levels of engagement by different overt behaviors, but little is known about how to measure different forms of engagement in the classroom. This article will...
The Construction industry is one of the most hazardous industries in the US.Construction workers, on a daily basis, are exposed to numerous risks while performing arange of activities involving construction, alteration, and or repair. Dust and diesel exhaustemissions from construction equipment are considered harmful to the workers in the longrun....
This study uses an existing database of dynamic loading tests of driven piles installed in the Puget Sound Lowlands to improve the reliability of axial performance. First, the unit shaft resistances developed from stress wave signal matching to dynamic records of pile installation are used to develop an effective stress-based...
Internal curing is a term used to describe a process in which curing water is provided to a concrete mixture from inside the mixture. Internal curing water has typically been provided in North America mixtures by using prewetted porous materials, like fine lightweight aggregate (FLWA). Alternative materials, such as superabsorbent...
This thesis provides a comparison of advanced econometric frameworks to account for unobserved factors in crash reported data (also referred to as unobserved heterogeneity) while identifying contributing factors by roadway classification for heavy vehicle injury severity and crash rates. The presented thesis provides two manuscripts that expand the literature regarding...
Ecoroofs have become more prominent in recent years. However, there is currently no enforceable standard or building code for the design and construction of ecoroofs across the United States (Kraupa, 2014). Further research is needed to determine how ecoroofs respond to roof motion and to develop an appropriate design standard.The...
The implementation and construction of Mechanically Stabilized Earth (MSE) walls has undergone substantial expansions in recent years, owing to its relatively low cost, ease of construction, and high efficiency compared to conventional retaining methods. As a result, MSE walls are being constructed to greater heights with complex features (e.g. multiple...
Every year thousands of people are killed or injured in work zone crashes in the US due to excessive speed, distraction, inattentiveness, low visibility, and other factors. Roadway construction and maintenance operations often occur at night when the traffic volume is low, creating less congestion and delay to the traffic....
State Departments of Transportation (DOTs) are the primary owners of roadway infrastructure in the United States. Many of the employees of state DOTs work on roadway work sites, putting them at disproportionately higher risks of injury or fatality. A review of the literature determined that a combination of policies, standards,...
Use of high-strength steel (HSS) reinforcing bars could provide constructability and economic benefits for the construction of structures, reducing the initial and ultimately the life-cycle cost of bridge and building structural elements. This thesis summarizes work performed in a research project on the use of HSS reinforcing bars for concrete...
Increasingly congested surface transportation network in urban areas and grow-ing land values make underground transportation systems more attractive for high-ways (i.e., tunnels) and metro system compared to other options [1]. An underground transportation system can preserve the land above for recreational parks, commer-cial buildings, residential homes, or other purposes while...
This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
In the light of the changing climate, the importance of designing effective watershed management plans that are likely to be implemented is becoming ever more important. This research introduces a new concept, consensus, for incorporation into stakeholder-guided interactive optimization of watershed management plans. User preferences were mathematically simulated based upon...
Bicyclists are one of the highest and most vulnerable road users. This is due to the higher likelihood of being seriously injured when involved in a crash. This research seeks to understand two different behavioral interactions of an implemented facility user: the motorist (secondary user) and bicyclist (primary user). The...
In this study, the effects of implementing different wind input or physics packages in a numerical wave model to recreate large wave conditions are explored. Three large wave events are simulated with WaveWatch III. The wind inputs which are compared are NCEP's Global Forecasting System (GFS) with 0.5 degree resolution...
The near-surface region of a coastal sediment bed is complex and dynamic. At some sites, near-surface sediment deposits are susceptible to extreme events, such as tsunamis or other large overflows, which induce high shear stresses on the sediment bed. The specific properties of sediment beds subjected to such extreme loading...
While riding bicycles has been promoted for its health, economic, and environmental benefits, it also complements other modes to complete a safe, efficient, and reliable transportation system. However, the dramatic increase of bicycle usage in the U.S. is accompanied by a growth of bicycle crashes. The U.S. Department of Transportation,...
Significant amounts of uncertainty owing to both modeling decisions and inherent randomness are present in simulating the material and geometric nonlinear response of structural systems to extreme loading. Computing the sensitivity of structural response with respect to model parameters indicates which parameters have the largest affect on the response, which...