Lateral spread is a pervasive type of liquefaction-induced ground failure that occurs on gentle slopes or near free-faces, such as river channels. Resulting horizontal displacements can reach up to several meters, and can be considerably damaging to foundations, bridges, roadways, pipelines, etc. In the 1990s, Bartlett and Youd (1992a, 1995)...
Wheeled mobility devices (WhMD) pose unique safety risks to users while riding public transportation. Unsecured or improperly secured WhMDs create safety concerns for other transit riders and operators. Tests using accelerometers and visual observations were conducted to understand how WhMD orientation and securement in articulated buses, streetcars, and light rail...
Damage estimates to the built environment from tsunamis are important for disaster mitigation, including planning emergency response and recovery. This dissertation evaluates the damage states of buildings in a small urban coastal city, Seaside, Oregon, from tsunami hazards generated by a Cascadia Subduction Zone (CSZ) event. This study is separated...
The fluid impact forces on a bridge superstructure in horizontal and vertical directions due to tsunamis represented by solitary waves are investigated through a large-scale laboratory experiment and numerical simulations. The experiment is conducted in a two-dimensional wave basin using a 1:5 scaled reinforced concrete bridge deck model tested under...
Previous research has shown that using fine lightweight aggregate (FLWA) can be a promising strategy to mitigate alkali-silica reaction (ASR) in mortar and concrete. While several possible theories were proposed by researchers, discrepancies in testing methods, materials, and supporting evidence still exist. Therefore, this study was initiated. There are two...
Natural disasters could result in unnecessary loss of life and disproportionate suffering to families and communities if evacuation plans are not in place or understood by the public. In the Pacific Northwest, a magnitude 9.0 earthquake and tsunami from the Cascadia Subduction Zone (CSZ) represents one of the most pressing...
Concrete is the most widely used construction material in the world. When constructing large concrete structures, concrete may have to be placed in multiple lifts. In these cases, fresh concrete is placed on hardened concrete. The interface that is formed between these two lifts of concrete is known as a...
The Bureau of Labor Statistics cites construction as the most hazardous industry within the United States. The construction industry was responsible for 20% of all fatal occupational injuries in 2014. Approximately 20% of the construction injuries occur within Heavy Civil Engineering, in which there are 950,000 workers employed annually. This...
Shallow landslides are a prevalent concern in mountainous regions that can result in severe societal, economic, and environmental impacts. The challenge is further compounded as the size and location of a potential slide is often unknown. This study presents a generalized approach for the evaluation of shallow landslide susceptibility using...
This study presents the theoretical background necessary to model the bearing capacity of shallow and deep foundations in partially saturated soils. The conventional bearing capacity equations for shallow and deep foundations and the 𝛽-method for deep foundation side resistance have been modified to include the effects of matric suction and...
A construction project is considered to be unique due to the process of delivering a customer-designed product, diverse stakeholders involved, the unique location and timeframe of construction, and specific social, economic, and environmental constraints attached to it. The uniqueness of construction projects brought great challenges to the construction industry professionals...
The aim of this research is to understand and quantify the modeling differences between CSiBridge and OpenSees, and to determine sensitive model parameters. When designing bridges for the high seismic region of California, the California Department of Transportation (Caltrans) performs nonlinear time history analysis of their bridge models. For three-dimensional...
A Geyser in a stormwater (SW) and combined sewer system (CSS) is an oscillatory and violent release of a mixture of air and water through vertical shafts. Violent geysers are highly destructive. In the case of combined sewer systems, many municipalities operate their systems at a fraction of their maximum...
High water temperatures in rivers have detrimental effects on riverine water quality and ecology. In this study, two river temperature models, within the agricultural watershed model Soil and Water Assessment Tool (SWAT), were investigated for their ability to simulate water temperatures accurately throughout the year. The original temperature model within...
Concrete is certainly prone to internal deteriorations or defects during the construction and operating periods. Compared with other nondestructive techniques, infrared thermography can easily detect the subsurface delamination in a very short period of time, but accurately identifying its size and depth in concrete is a very challenging task. In...
Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...
Ionospheric scintillation occurs mainly at high and low latitude regions of the Earth and may impose serious degradation on GNSS (Global Navigation Satellite System) functionality. The Brazilian territory sits on one of the most affected areas of the globe, where the ionosphere behaves very unpredictably, with strong scintillation frequently occurring...
The Pacific Northwest is at risk for significant seismic and tsunami events, which are capable of severely damaging lifeline transportation infrastructure, particularly bridges. As the bridges in the United States age and begin to show signs of fatigue, the risk for severe damage increases. Proper monitoring and inspection of bridges...
In this thesis, the effectiveness of the 100 percent + XX percent seismic response directional combination rule available in codes and standards is evaluated using simulated nonlinear seismic response of two existing multi-story reinforced concrete plan-irregular buildings. The 5-story and 8-story buildings were designed according to the 1975 seismic codes...
CSS-1H is the most commonly used slow-setting emulsion grade in Oregon. “New” engineered emulsions were recently developed in Oregon to reduce tracking, the pick-up of tack coats by construction vehicle tires during construction activities, and increase interlayer shear strength (ISS), the amount of adhesive bond present between layers of asphalt...