During the past year the rapid increase in the cost of copper and aluminum has led operating companies to investigate the feasibility of using iron and steel conductors for transmission and distribution purposes where small blocks of power are to be served. This Thesis gives the results of tests on...
The purpose of this thesis is the determination of the load characteristics of the Steam-Hyciro-Electric Plant owned and operated by the Lebanon Electric Power and Water Co. This corporation furnishes electrical energy for power and lighting service and also the water supply to the city of Lebanon, Oregon.
Following the installation of a street car
system, or for that matter, any other electric system,
using the ground return, or the rail return which comes
in contact with the ground, there is always more or
less trouble experienced by water or gas companies,
using metal pipe, due to the...
The scope of this thesis consists primarily of
an exposition upon the merits of indirect and. semi-indirect
illumination. In deriving our conclusions, we
have considered two sources of information: firstly,
that of test data from a number of indirect and direct
installations, and. secondly, the opinion of men familiar
with...
This machine Is the first series arc machine installed
In the city of Portland. It was obtained by
the Electrical Department of O.A.C., with the object
of rewinding it for a high current machine to be used
in the charging of storage batteries.
The question of whether to purchase power or to
maintain an isolated plant is one which frequently
confronts the engineer, and the problem is by no means
easy of solution, as there are a number of factors
which vary with individual cases and determine the
economy and desirability of the...
In view of the fact that the college authorities have
purchased a set of wireless apparatus, it was thought best
to design and construct a transformer of suitable size for
transforming the power to be used by this set of instruments.
The power required for such a set is approximately...
"There are at present four common methods of con
verting the alternating current into direct current.
These are in order of use, the motor generator set,
the rotary converter, mercury vapor rectifier and the
Murphy rectifier. A short description of these and
connections for the last two will be given."--p.2
Much has been accomplished in the last few years
toward the conservation of natural resources, and in
this work the engineer has taken a leading part. The
prevention of unnecessary waste, the utilization of
hitherto useless by-products, and the economic production of the world's necessities are important features of this...