This research work focuses on the mechanism of 1/f noise in GaAs
resistors on semi-insulating substrates and 1/f noise due to temperature
fluctuations in heat conduction in resistors, diodes, and bipolar transistors. The
goal of this research is to generate accurate models to explain physical origin of 1/f
noise in...
This thesis presents a novel algorithmic A/D converter to be used in a biosensor. The converter is capable of a conversion rate of 1.5 bits/phase and hence the required conversion time is reduced. The proposed architecture is analyzed for non-ideal effects and compared with existing algorithmic A/D architectures. The converter...
In cellular telephones, RF power amplifiers consume a significant part of the total phone current. Reducing the average PA current will extend battery life. In GSM systems the handset is commanded by the base station to transmit at power levels lower than full power much of the time. A Doherty...
This thesis presents a channelized digital receiver design for UWB sytems in a multipath indoor environment. The UWB technology has been used for commercial and military purposes due to a number of advantages such as low-power consumption, noise-like and carrier free. The energy of UWB signal is spread over a...
"Collaborative filtering algorithms’ performances have been evaluated using a variety of metrics.
These metrics, such as Mean Absolute Error and Precision, have often ignored recommendations for
which they do not have data. Ignoring these recommendations has provided numbers which do not
accurately represent the user experience. Qualitatively we have seen...
AES (Advanced Encryption Standard), also known as Rijndael, is a symmetric key block cipher adopted as an encryption standard by the US government and used extensively in cryptographic applications worldwide. ARM is the most popular processor core used in embedded applications. This thesis surveys the available public implementations of AES...
Recently, continuous-time ΔΣ modulators are appearing increasingly often in both the literature and the marketplace due to their features of inherent antialiasing and relaxed requirements for opamp and so on. However, several nonideal factors such as clock jitter, excess loop delay, inter-symbol interference and so on, degrade the SNR performance...
Farm machinery continues to increase in its importance to the agricultural sector. Depreciation, the decline in value of a durable asset over time, represents one of the largest costs of agricultural production. The general objectives of this study were to update and expand the number of Remaining Value (RV) functions...
An analysis of substrate noise coupling in mixed-signal circuits has been performed in the TSMC 0.25 [mu]m lightly doped and heavily doped CMOS processes. Methods to minimize noise coupling in both the chip design and board design phases are presented along with techniques for accurate circuit simulation of noise coupling....
Retention of engineering students is a problem for many universities, especially during the first year. The problem of introducing students to engineering while increasing retention rates has recently been addressed by many different universities. Implementing novel lab structures, adjusting the lecture to incorporate more effective teaching techniques, and using orientation...
This thesis presents a model for simulating individual pedestrian motion based on empirical data. The model keeps track of a pedestrian’s position, orientation, and body configuration and leverages motion capture data to generate plausible motion. Our model can automatically incorporate a pedestrian’s physical limitations when making movement decisions, since it...
Commonly proposed ocean wave energy converters (OWEC) use inefficient and maintenance demanding intermediate hydraulic and pneumatic systems. We propose a novel rotary direct-drive OWEC that eliminates these intermediate stages. The new device employs a contactless force transmission system (CFTS) comprising a “piston” and a “cylinder” and a ball screw to...
Functional programming is concerned with referential transparency, that is, given a certain function and its parameter, that the result will always be the same. However, it seems that this is violated in applications involving uncertainty, such as rolling a dice. This thesis defines the background of probabilistic programming and domain-specific...
With the development of high performance power electronic and semiconductor technologies, Adjustable Speed Drive (ASD) systems are increasingly applied in residential, commercial and industrial applications. Due to the advantages at higher power ratings, the three-level Neutral-Point-Clamped (NPC) Voltage Source Inverter (VSI) is being employed in industrial and traction applications, static...
Researchers at Oregon State University, focusing on the development of ocean wave energy converters, have designed and installed a unique linear test bed to aid in the characterization of these converters. Under the original control scheme, the linear test bed follows a position profile and is limited in its ability...
This thesis proposes a novel fully digital technique for the estimation and correction of the DAC error in multi-bit delta sigma ADCs. The structure of the DAC error is indicated through a simple model for unit-element based DACs. The impact of the DAC error on the performance of ADC is...
As more wind farms are connected to the grid, the variable nature of wind energy begins to influence grid stability. Energy storage could help smooth the variable nature of wind energy. Laboratory demonstration and exploration of the interaction between different energy storage devices and wind energy could help improve and...
Determining the performance characteristics of various ocean wave energy converters (OWEC) has proven to be difficult due to problems replicating a baseline motion profile in the ocean or wave tank to compare these devices. The linear test bed seeks to mechanically simulate the relative linear motion between the active components...
A methodology for rapid estimation of substrate noise generated by digital circuitry in mixed-signal circuits is presented. This methodology is incorporated into the Silencer! framework, and also provides for future improvements including pre-layout noise estimation. Measurements of a test chip fabricated in the TSMC o.25[mu]m heavily doped logic process validate...
The design of a 10-bit pipelined charge redistribution DAC employing MOSCAPs biased in their accumulation mode is presented in this thesis. A switched capacitor filter and output buffer have also been designed for the system. The effect of MOSCAP nonlinearity on the performance of the pipelined charge redistribution DAC has...
Digital-to-analog converters (DACs) with wide dynamic range and high
linearity are required for high-end audio applications. A multi-bit delta sigma
audio DAC, using a novel gain-correction technique, is described in this thesis. For
widely varying on-chip RC time constant, the DAC gain can be accurately
controlled by the correction circuitry....
Evolution of the mobile communication standards and proliferation of hand-held devices mandate stringent Analog-to-Digital Converter (ADC) specifications. Among various ADCs, a ∆Σ ADC is best known as a power-efficient ADC when more than 12b is required. However, a conventional discrete-time (DT) ∆Σ Modulator (∆ΣM) is inadequate for low-power wideband applications...
A fully integrated CMOS latched comparator is presented for use as a wake-up circuit that is attached to an RF energy harvester in a battery free wireless sensor network. The system consumes less than 36nA static current at 20°C and dissipates 2pJ of energy per conversion. The comparator comprises of...
Ocean wave energy is rapidly becoming a field of great interest in the world of renewable energy. Significant advancements in design and technology are being made to make wave energy a viable alternative for our growing energy demands. The two major hurdles for ocean wave energy to make a significant...
With the increasing effort to identify alternative methods of energy generation, extraction of ocean energy has gathered a large interest. Research and industry have begun considering wave energy as the next new alternative energy. The unique challenges of ocean energy requires a wave energy converter to be both robust and...
Interest in nanomaterials is motivated partly by their potential for sensor arrays to detect
different gases. Nanowires in particular are of interest because their high surface-to-volume
ratio promises the possibility of high sensitivity. However, because of their discrete
quasi-one-dimensional geometry, electrical integration of nanowires into photolithographically
defined devices and circuits...
High data rate transmission has become an important challenge in today digital communication systems. One of the most difficult problems faced by engineers is to transmit data at sufficiently high rates through fading channels. This is the main motivation for the research presented herein. In this thesis, we investigate a...
What are the most effective ways to improve the engineering curriculum? Improvements should result in increased student retention, undergraduates who are more industry-ready and graduates who are better prepared to be leaders. Current research suggests that the best predictor of persistence is a person’s self-efficacy. The focus of this thesis...
Remote sensors are becoming the standard for observing and recording ecological data in the field. Such sensors can record data at fine temporal resolutions, and they can operate under extreme conditions prohibitive to human access. Unfortunately, sensor data streams exhibit many kinds of errors ranging from corrupt communications to partial...
We took the back-propagation algorithms of Werbos for recurrent and feed-forward neural networks and implemented them on machines with graphics processing units (GPU). The parallelism of these units gave our implementations a 10 to 100 fold increase in speed. For nets with less than 20 neurons the machine performed faster...
Power and timing requirements are becoming more and more stringent as applications move from less mobile devices to more mobile ones. As such, it is important to optimize these applications as much as possible in order to provide the best solution that is low power and low latency. Although there...
Domain-independent automated planning is concerned with computing a sequence of actions that can transform an initial state into a desired goal state. Resource production domains form an interesting class of such problems, in that they typically require reasoning about concurrent durative-actions with continuous effects while minimizing some cost function. Although...
Modern wireless System-on-Chips (SoCs), such as mobile handsets, sensor networks, and mm-wave systems, integrate an entire RF system on a single CMOS chip. Such highly complex systems require significant on-chip digital signal processing to help improve the performance of highly sensitive analog/RF components. The IC
market being competitive, the ability...
Digital phase-locked loops (PLLs) have been receiving increasing attention recently due to their ease of integration, scalability and performance comparable to their analog counterparts. In digital PLLs, increased resolution in time-to-digital conversion is desirable for improved noise performance. This work describes the design and simulation of a stochastic time-to-digital converter...
In this thesis, a novel Direct-Charge-Transfer (DCT) integrator structure is proposed, which can settle much faster than regular switch-capacitor integrators. A new Spread-Spectrum Dynamic Element Matching (SS-DEM) algorithm is also introduced, which can effectively spread or shape the nonlinearity error of multi-bit DAC in the feedback path, thus improve the...
Recently, delta-sigma modulation has become a widely applied technique for high-performance analog-to-digital conversion of narrow-band signals. Most of the early designs used discrete-time structure for good accuracy and good linearity. The transfer functions are independent of the clock frequency. However, high unity-gain bandwidths of the opamps are required to satisfy...
At frequencies exceeding 1-2 GHz, the substrate network models used in substrate coupling simulation must account for the reactive nature of the substrate. Unlike at low frequencies, where the purely resistive substrate models can be validated through DC resistance measurements, these high-frequency models, comprising reactive components, must be validated through...
Alignment of genomic sequences from different species is becoming an increasingly powerful method in biology, and is being used for many purposes. The result of sequence alignments is a list of pairs of matched locations between the pattern string and the text string. However, without any proper visualization tools to...
A novel switched-R-MOSFET-C input branch is proposed for low-voltage and high-linearity applications. The tunability is achieved by varying the clock duty cycle using an automatic tuning circuit. This tuning method does not involve a change in gate voltage, and is therefore particularly suitable for low-voltage applications. The advantages of the...
Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are widely used in wireless transceivers. Recently, continuous-time (CT) ΔΣ ADCs gain growing interest in wireless applications for their lower power consumption and wider input bandwidth as compared with the discrete-time (DT) counterparts.
In this thesis, a wideband low-power CT ΔΣ modulator for next generation...
Modern applications in wireless communications systems demand the capability of high transmission rate. Engineers have to find optimum solutions to transmit the signal over fading environments. In this study, we propose the combination of space-time diversity techniques and optimum QAM constellation design, in order to further improve performance. Specifically, we...
Pipelined analog to digital converters (ADCs) are very important building blocks in many electronic systems such as high quality video systems, high performance digital communication systems and high speed data acquisition systems. The rapid development of these applications is driving the design of pipeline ADCs towards higher speed, higher dynamic...
A basic tradeoff to consider when designing a distributed data-mining framework is the need for a compromise between the cost of communication and computation resources and the accuracy of the mining results. This is essentially a decision of whether it is more efficient to communicate all of the data to...
A new method is presented to compress switching information in large digital circuits. This is combined with an efficient approach of generating the noise signatures of cells in a digital library that results in an accurate and efficient approach for estimating the noise generated in digital circuits. This method provides...
A tuning technique which tunes the continuous time filter very accurately is proposed in this thesis. This technique overcomes the problem of master slave mismatch, thus tuning the filter accurately. The mismatch minimization is done on power up on foreground while the background tuning is always operational. Once the mismatch...
Active contour models have been widely applied to image segmentation and
analysis. It has been successfully used in contour detection for object recognition,
computer vision, computer graphics, and biomedical image processing such as X-ray,
MRI and Ultrasound images.
The energy-minimizing active contour models or snakes were developed by Kass,
Witkin...
Knowledge workers are struggling in the information flood. There is a growing interest in intelligent desktop environments that help knowledge workers organize their daily life. Intelligent desktop environments allow the desktop user to define a set of “activities” that characterize the user’s desktop work. These environments then attempt to identify...
This thesis presents an adaptive modulation scheme using a Walsh-code modulator. The Walsh-code modulator consists of a dynamic demultiplexer and predetermined sets of orthogonal Walsh-Hadamard codes. The demultiplexer can demultiplex the input bit stream into a maximum of thirty-two sub-streams. The Walsh- Hadamard codes are used to spread the spectrum...
Rapid advances in wireless networking have led to more mobile phones, PDAs, and other digital mobile devices becoming ubiquitously connected to the Internet. As the demand of delay sensitive real-time applications for these portable devices increases, providing seamless connectivity to wireless networks becomes a critical issue. For this reason, a...
The exponential rate of advances in modern communication devices in the last several years have brought us higher levels of functionality and performance as well as reductions in physical size and power consumption. To continue this rate of advancement, next generation systems require wider bandwidth and higher resolution ADCs. Additionally,...
Traditionally linear actuator applications are addressed by the use of hydraulic systems. The high maintenance cost and poor reliability will always be the most critical problem in the real applications. Benefited from both the high mechanical advantage of the roll screw and the simple structure of the switched reluctance motor,...
The appropriate separation of concerns is a fundamental engineering principle. A concern, for software developers, is that which must be represented by code in a program; by extension, separation of concerns is the ability to represent a single concern in a single appropriate programming language construct. Advanced separation of concerns...
Cryptographic devices leak timing and power consumption information that is easily measurable, radiation of various levels, and more. Such devices also have additional inputs, other than plaintext and keys, like voltage, which can be modified to force the device to produce certain faulty outputs that can be used to reveal...
This thesis presents algorithms and tools for the automated design of RF LC CMOS voltage controlled oscillators (VCOs) with low phase noise given a set of specifications. The electromagnetic solver, ASITIC, combined with the circuit simulator, SpectreRF, allows optimization of the VCO circuit parameters and inductor layout. This approach gives...
The focus of this thesis is the investigation of thin-film transistors (TFTs) based on amorphous oxide semiconductors (AOSs) in two circuit applications. To date, circuits implemented with AOS-based TFTs have been primarily enhancement-enhancement inverters, ring oscillators based on these inverters operating at peak frequencies up to ~400 kHz, and two-transistor...
Protecting end-users privacy and building trust are the two most important factors needed to support the growth of ecommerce. The increased dependence on the Internet for a wide variety of daily transactions causes a corresponding loss in privacy for many users, as virtually all websites collect data from users directly...
This thesis presents a Z-parameter based model to predict the substratenoise coupling between two contacts in a heavily doped substrate for frequenciesless than 2 GHz. The empirical model is scalable with contact size and spacingsbetween the contacts and model parameters can be readily extracted from simu-lated or measured data. The...
An enhanced swing differential Colpitts VCO (ESDC-VCO) dramatically improves
the swing of a Colpitts VCO by allowing the signal to swing below ground and above the
supply voltage. Fabricated in a 1P8M 0.13 um CMOS process, the ESDC-VCO operates
at 4.9GHz with a 0.475-V supply and consumes 2.7mW. The measured...
Forward Error Correction and retransmission are two approaches used to reliably broadcast data in a network with poor quality of service. Taking some assumptions, it has been suggested that a retransmission based reliable broadcasting scheme using network coding should in theory provide an increase in bandwidth efficiency by combining packets...
With the current security climate throughout the Internet, a large emphasis is being placed on protecting software systems from attack by a malicious entity. Most successful attacks against software are the result of lazy or misinformed developers and are easily prevented given the correct preparation and instruction. This document provides...
This paper presents an overview of cogeneration, also known as combined heat and power (CHP). The technology of cogeneration is described and the three primary cogeneration processes are discussed. The transition between parallel operation with the utility and stand-alone operation is discussed. The tradeoff between a synchronous and an induction...
An ultra low power crystal oscillator that provides a frequency reference for battery
powered timekeeping applications is presented. An amplitude control circuit is employed to ensure that minimum current is consumed. A subthreshold voltage regulator provides a supply voltage for the oscillator with minimum current consumption. The oscillator and regulator...
A fully integrated CMOS GPS receiver RF front end optimized for low power operation is presented. The system operates with a supply voltage down to 250 mV. A prototype has been fabricated in a 0.13μm CMOS process and includes a low voltage LNA, quadrature oscillators, and quadrature mixers. It exhibits...
The electrical behavior of on-chip interconnects has become a dominant factor in silicon-based high speed, RF, and mixed-signal integrated circuits. In particular, the frequency-dependent loss mechanisms in heavily-doped silicon substrates can have a large influence on the transmission characteristics of on-chip interconnects. To optimize the performance of the integrated circuit,...
Passive components, including spiral inductors and transformers, fabricated on silicon-based substrates are placing an increasing demand on radio-frequency integrated circuit (RFIC) design. Performance of the RFIC suffers from several non-ideal effects that must be taken into account in order to create a successful design. In particular, monolithic transformers can be...
A novel method for modeling bends in coplanar waveguides (CPWs) is described. The CPW can be viewed as a pair of parallel coupled quasi-slot lines. Bends in the CPW are modeled as a non-uniform coupled line system in terms of their even- and odd- mode characteristics. This modeling approach is...
A new comprehensive wide-band compact modeling methodology for single-ended spiral inductors and differential spiral inductors is presented. The new modeling methodology creates an equivalent circuit model consisting of frequency-independent circuit elements for use in circuit simulators. A fast automated extraction procedure is developed for determining the circuit element values from...
This thesis examines substrate noise coupling for NMOS transistors in heavily doped substrates. The study begins with the analysis of an NMOS transistor switching noise in a digital inverter at the device level. A resistive substrate network for the NMOS transistor is proposed and verified. Coupling between N+- P+ contacts...
Modern wind energy is the technology of choice with a short payback period for increasing renewable energy portfolios. Bonneville Power Administration (BPA), a United States power authority in the Pacific Northwest expects to increase their wind energy capacity from 2,000 megawatts to 6,000 megawatts within the next five years. Currently...
"Each year, the grant support varying numbers of teachers to investigate spreadsheets with the intent of integrating teaching mathematics/science with spreadsheets. These teachers were taught to focus on teaching about key concepts of spreadsheet design while they also taught with the spreadsheets as tools for learning mathematics/science. As part of...
We present an approach for generating a character’s response in anticipation of an impending impact. Protective anticipatory movement is built upon several simple actions that have been identified as response mechanisms in monkeys and in humans. These actions are parameterized by a model of the interaction based on the approaching...
The US military is evaluating the capabilities of emerging technologies based on IEEE 802.16 standard as a potential commercial off-the-shelf solution to support the communication requirements of the future war.
In the last few years, development in military and telecommunication industries have focused on an intensive use of broadband systems,...
This dissertation explores the idea of applying machine learning technologies to help computer users find information and better organize electronic resources, by presenting the research work conducted in the following three applications: FolderPredictor, Stacking Recommendation Engines, and Integrating Learning and Reasoning.
FolderPredictor is an intelligent desktop software tool that helps...
Analog-to-Digital Data Converters (ADCs) used in instrumentation and measurements often require high absolute accuracy, including excellent linearity and negligible dc offset. Incremental data converters (IDCs) provide a solution for such measurement applications. Since IDCs are essentially delta-sigma converters with reset operation before each conversion, they retain most of the advantages...
Accreditation Board for Engineering and Technology, Inc. (ABET) is the primary organization responsible for monitoring, evaluating and certifying the quality of engineering, engineering technology, computing and applied sciences education in the United States. In 2000, ABET changed the way computer science (and engineering) programs are accredited from a ‘checklist’ approach...
Conventional register files spread porting resources uniformly across all registers. This paper proposes a method called Asymmetric Clustering using a Register Cache (ACRC). ACRC utilizes a fast register cache that concentrates valuable register file ports to the most active registers thereby reducing the total register file area and power consumption....
Low noise oscillators are universally needed in digital systems for clock generation and synchronization, and in radio-frequency communication front-ends for frequency up- and down-conversion. Noise in oscillators results in timing jitter, and limits the clock frequency of digital systems. In radio-frequency communication systems, phase noise in oscillators lowers the signal-to-noise...
An automated method, requiring the fabrication of a small set of test structures, efficiently extracts the coefficients of Z-parameter based macromodels. The extraction approach has been validated for both heavily and lightly doped substrates and can be applied to a variety of technologies. After the parameters of a macromodel have...
Almost every student in the School of EECS undergoes the process of Blanket Credit
Registration wherein the student has to fill out the form for registration, meet the
concerned professor and obtain his approval. The staff of the department has to maintain
the details of the student and the Professor...
In this dissertation, we present a user-in-the-loop method for the design of an interactive motion data structure that benefits from the advantages of both motion graphs and blend-based techniques. Our novel approach automatically analyzes a traditional motion graph built from labeled motion clips. The result is a more condensed, coarser...
Wireless Networks have been widely adopted into a major part of today's network infrastructure. They have become a popular technology to not only expand the coverage of wired networks but also to interconnect a large wireless network, i.e., wireless mesh networks. As they allow more flexible communication than traditional wired-networks...
Traditionally, research into end-user programming has focused on how to make programming more accessible to end users conducting the programming activities all by themselves. However, few researchers have considered introducing the concept of collaborative programming into the area of end-user programming, and how the programming environments and devices should be...
Magnetically coupled passive transformers are increasingly integrated on-chip for
various analog and radio frequency (RF) applications including direct current
(DC) isolation, impedance transformation/matching, and conversion between
single-ended and differential signals. A primary motivation for the on-chip
integration of transformers is the overall size reduction and reduced cost.
However, the performance...
Sequential supervised learning problems involve assigning a class label to each item in a sequence. Examples include part of speech tagging and text to speech mapping. A very general-purpose strategy for solving such problems is to construct a recurrent sliding window (RSW) classifier which maps some window of the input...
Sequential supervised learning problems involve assigning a class label to each item in a sequence. Examples include part-of-speech tagging and text-to-speech mapping. A very general-purpose strategy for solving such problems is to construct a recurrent sliding window (RSW) classifier, which maps some window of the input sequence plus some number...
Contemporary circuit design involves significant computer-based simulation, calling for a balance between circuit model accuracy and simulation run time. Traditionally, circuit modelers concentrated on producing either (1) physically-based models, where each element in the model correlates to a physically meaningful aspect of the device being modeled or (2) mathematically-based "macromodels,"...
Designing spectral efficient, high-speed wireless links that offer high quality-
of-service and range capability has been a critical research and engineering challenge. In this thesis, we mainly address the complexity and performance issues of
channel estimation and data detection in multiple-input multiple-output (MIMO)
orthogonal frequency division multiplexing (OFDM) systems over...
A digital phase locked loop (DPLL) and a statistical time-to-digital converter (STDC) were previously fabricated in a 0.35µm, 3.3V SOI CMOS process. This work summarizes these designs and characterizes the measured performance. Simulations supplement the measurements where applicable.
The DPLL was found to reach a locked state under a limited...
The long-term goal of this research project is the development of solution-based inorganic dielectric and semiconductor materials for inkjet printed electronics. The main focus of this thesis involves testing of the materials and devices under development. A new solution-based inorganic dielectric material (HfOSO₄), given the name hafsox, is developed and...
Motion capture data is a digital representation of the complex temporal structure of human motion. Motion capture is widely used for data-driven animation in sports,medicine and entertainment, because of its ability to capture complex and realistic
motions. Due to its efficiency and cost, methods for reusing collections of motion capture...
This thesis presents a comparison of time-domain and frequency-domain algorithms for phase noise calculation in oscillators. Floquet theory provides the mathematical foundation for these calculations and the numerical methods employ perturbation projection vectors (PPVs). The PPVs are an estimate of an oscillator's sensitivity to noise.
The in-house circuit simulator SPICE3...
Most of the work so far in the subfield of Gender HCI has followed a theory-driven approach. Established theories, however, do not take into account specific issues that arise in end-user debugging. We suspected that there may be important information that we were overlooking. We therefore employed a methodology change:...
A Z-parameter based macromodel for characterizing the substrate noise coupling in a lightly doped substrate at low frequencies has been developed. The model is scalable with contact geometries and separation. The cross-coupling impedance between two contacts is modeled using an improved geometric mean distance formulation. This approach obviates the need...
Machine learning encompasses probabilistic and statistical techniques that can build models from large quantities of extensional information (examples) with minimal dependence on intensional information (domain knowledge). This focus of machine learning is reflected in the never-ending quest for "off-the-shelf" classifiers. To generalize to unseen data, however, we must make use...
Personalization is defined as a process that facilitates interaction among consumers and providers such that individual consumers are enabled to more readily access the content and services of providers, and individual providers are enabled to more effectively and easily deliver their content and services to consumers. This project presents a...
This thesis focuses on two aspects of oxide-based thin-film transistors (TFTs), contact resistance and instability assessment.
First, determination of the contact resistance of indium tin oxide (ITO) on two wide-band gap semiconductors, zinc oxide (ZnO) and indium gallium oxide (IGO), is attempted and the effects of contact resistance on device...
Analog-to-digital converters (ADCs) convert analog
continuous time signals into discrete time, digital format. One
precondition that must be met for conventional nyquist rate ADCs is
that the input signal must be suitably band-limited to an input
bandwidth less than the nyquist frequency. This mandates expensive
anti-alias filters which contribute to...
Identifying the most relevant items in an e-commerce site is becoming more and more
difficult nowadays because of the heavy overload of information. A Java Recommender
System that uses Collaborative Filtering techniques has been developed to reduce such
information overload and even personalize the information to the individual’s preference.
The...
In this report, I first introduce three areas of interest to collaborative filtering researchers, namely: (a) how to solve the sparsity and scalability problems in recommendation systems; (b) how to rapidly develop and test collaborative filtering algorithms; and (c) how to apply collaborative filtering to unbounded numeric preference data. In...