Index Catalog // ScholarsArchive@OSU

Fully developed laminar natural convection in a vertical parallel-plate duct with constant wall heat flux

Creator:: Aktan, Gülçin
Abstract:: The problem of heat transfer due to free convection in a channel formed by two parallel, isoflux, vertical plates is of considerable importance in electronic cooling applications, thermosiphons, the optimum spacing of plates or components, industrial stacks, heat exchangers, nuclear power plants and combustion involving vertical walls. Although in each...
Resource Type:: Masters Thesis
Full Text:: that the Nusselt number is proportional to the channel Rayleigh number . Bodoia and Oster le [5

A study of compression loading of composite laminates

Creator:: Berbinau, Pierre J.
Abstract:: The compressive behavior of continuous fiber composites is not as well understood as their tensile behavior because research and industrial applications have until recently focused on the latter. Furthermore, most theoretical and experimental studies on the compression of composites have examined the case of unidirectional specimens with fibers along the...
Resource Type:: Dissertation
Full Text:: capability to model kink formation. Haber le and Matthews [41] considered the microbuckling of plies with

A pipe entry length solution for heat transfer and flow in Powell-Eyring fluids with temperature-dependent viscosity and constant flux boundary condition

Creator:: Etchart, David Ygnacio
Resource Type:: Masters Thesis
Full Text:: + SINH -1 1 [ The differential equation for momentum r au au, dP a2U S au as auu + + s + +Pr aX aR

Microstructures and properties of Nb/Ti multilayered thin films

Creator:: Faase, Kenneth James
Resource Type:: Dissertation
Full Text:: A=17 nm lhr/300°C 13.4 3.304 x' xe spot BCC&HCP A=17 nm 10hr/450°C 14.4 3.315 xe le spot BCC&HCP

Elastodynamic analysis of a propagating finite crack in a micropolar elastic solid

Creator:: Han, Seog-young
Abstract:: A dynamic propagation of a finite crack of opening mode in a micropolar elastic solid was investigated. By using an integral transform method, a pair of twodimensional singular integral equations governing stress and couple stress was formulated in terms of the displacement transverse to the crack, macro- and microrotations, and...
Resource Type:: Dissertation
Full Text:: x *(n,O,p) sinh[13(n-x)] do+ t3 -02 + t2 cK T(n,O,p) sinh[q2(n-x)] do , -02 s 44.13. q(X,S,P

The effects of stress and temperature on the creep of aluminum alloy conductor wire

Creator:: Riesland, Edward Ernest
Resource Type:: Masters Thesis
Full Text:: many cases, since the curves obtained indicate that tor some stress le,rels and. te1llperatures, the

Simulaton of a solar heating and cooling system with experimental evaluation

Creator:: Layton, William Clifford
Abstract:: This thesis is concerned with simulating two forms of energy retrieval. Standard computer programs are routinely used to simulate such energy systems. However, the accuracy of these simulations is not well documented. The main objective of the work presented here is to evaluate the validity of this type of simulation...
Resource Type:: Masters Thesis

Anchor-last deployment procedure for mooring

Creator:: Thresher, Robert W. and Nath, John H.
Abstract:: The anchor-last mooring procedure is investigated in order to determine the transient forces in the mooring line and the velocities of the anchor. Transient forces were determined and the results showed that no severe snap loads occurred for the cases investigated. In addition, it was found that the vertical velocity...
Resource Type:: Technical Report
Full Text:: -IINT 11+,STOTAL,0tNLINE,0,0,NM,"!SS 1v4 FC ',":T(///!4H2LINE LE'4G{ i =F6.194H FT./ DENSITY =F7.3,1

Vibrations of suspended cables

Creator:: Gale, John Gregg
Abstract:: The equations of motion of an elastic cable suspended in a viscous medium from two arbitrary points are derived. These are then linearized for the undamped, inextensible case, and it is found that the equations describing the in-plane motion of the cable are then independent of the equation describing the...
Resource Type:: Dissertation

Analysis of ceramic heat exchangers for use in a combined-cycle, wood-fired power plant

Creator:: Ranasinghe, Jatila
Abstract:: This report presents the analysis of ceramic heat exchangers for use in a combined-cycle, wood-fired power plant. The combined-cycle system investigated is characterized by having a wood-fueled combustor, an indirect-fired gas turbine, and a Rankine steam cycle. The direct use of low-grade fuels, such as wood, in present gas turbines...
Resource Type:: Masters Thesis
Full Text:: arrangement the correction factor F is calculated from, 1/1-p = (exp(x))(cosh(x) + (1-p)sinh(x) ) x = kp/q

ScholarsArchive@OSU

Fully developed laminar natural convection in a vertical parallel-plate duct with constant wall heat flux

A study of compression loading of composite laminates

A pipe entry length solution for heat transfer and flow in Powell-Eyring fluids with temperature-dependent viscosity and constant flux boundary condition

Microstructures and properties of Nb/Ti multilayered thin films

Elastodynamic analysis of a propagating finite crack in a micropolar elastic solid

The effects of stress and temperature on the creep of aluminum alloy conductor wire

Simulaton of a solar heating and cooling system with experimental evaluation

Anchor-last deployment procedure for mooring

Vibrations of suspended cables

Analysis of ceramic heat exchangers for use in a combined-cycle, wood-fired power plant

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search