Many publications, documents, codes and guidelines exist related to the seismic evaluation and rehabilitation design of existing buildings. This report discusses the assumptions and methods employed for investigation of two wood structures using four references: FEMA 154, FEMA 356, ASCEI per SEI 31, and 1997 UBC. The screening performed using...
The objectives of this study were to evaluate the performance of wood-frame shear walls under monotonic, cyclic, and earthquake loads by: 1) comparing performance under each loading protocol; 2) evaluating effects of anchorage; and 3) eval-uating performance qualitatively and quantitatively with respect to code-defined performance measures. Tests were conducted on...
The forces exerted on light-frame wood buildings as a result of surge and waves are not fully understood. With a better understanding of these types of forces, it may eventually be possible to build coastal structures to better withstand the loads. In this paper, a recent two part experimental study...
Presently, the production of wood composites relies on the formaldehyde-based wood adhesives such as phenol-formaldehyde (PF) and urea-formaldehyde (UF). However, their dependence on exhaustible fossil fuels and the emission of carcinogenic formaldehyde prompt to develop an environmentally friendly adhesive from renewable natural resources. This work focuses on development and characterization...
Sawmills are very complex systems that involve many manufacturing processes. The variability of their raw material adds further to this complexity as each log has characteristics that determine its processing path. Therefore, computer simulation is a very useful technique for analyzing sawmill performance. This thesis describes a simulation computer model...
A sawmill is similar to other manufacturing enterprises when it comes to making decisions, scheduling production and meeting customer demands. In order to help sawmills achieve their goals, and because there is such a high degree of variability in the raw material used in this industry, computer simulation has proven...
Wood-plastic composites (WPCs) are one of the fastest-growing sectors of the
wood composites industry. However, the strengths of WPCs are typically low
because of the poor interfacial adhesion between hydrophilic wood and
hydrophobic thermoplastics. A compatibilizer that can form bridges between wood
and plastics is required to give WPCs desirable...
Heartwood can have properties that are distinct from sapwood,
including resistance to insect and microbial attack. Despite the practical
importance of heartwood formation in trees, a review of the literature revealed
that little was known about the effects of environmental factors on heartwood
quality or how variations in heartwood properties...
The emission of organic compounds from wood manufacturing
facilities is an important regulatory concern due to their effects on ambient
air quality. Control technologies, such as oxidizers and biofiltration, are
used to remove organics from air streams; however, most removal
technologies have high costs or cause additional negative environmental
impact....
The dynamics of radio frequency (RF) laminated veneer lumber (LVL) pressing are explored for the purpose of optimizing this process. The RF LVL press at the Albany Trus Joist plant is the focus of this investigation. The investigation first focuses on bond strength development characteristics of the Georgia Pacific adhesive...