Ten full-size (3.7×4.9m) plywood roof diaphragms were constructed using metal-plate-connected (MPC) common and hip wood trusses or joists, typical of single-family dwelling (SFD) construction. The specimens included three gable roof slopes of 33, 67, and 100%, a hip roof of 33% slope, and a flat roof, with a horizontal bottom...
The objectives of this study were to evaluate the performance of wood-frame shear walls under monotonic, cyclic, and earthquake loads by: 1) comparing performance under each loading protocol; 2) evaluating effects of anchorage; and 3) eval-uating performance qualitatively and quantitatively with respect to code-defined performance measures. Tests were conducted on...
The construction industry has relied heavily on wood and wood-based composites, such as oriented strand board (OSB) and plywood for timber frame construction. Therefore, it is highly imperative to categorize the response of wood-based composites when exposed to elevated temperatures for a sustained period of time. The essence of fire-resistant...
This study investigated the effect of exposure to elevated temperature on the yield strength of single-shear nail connections when subjected to lateral loading. Solid sawn lumber and laminated veneer lumber were used as framing members and two different thicknesses of both oriented strand board and plywood were used as the...
This paper highlights the development of a rapid visual screening (RVS) tool to quickly identify, inventory, and rank residential buildings that are potentially seismically hazardous, focusing on single-family, wood-frame dwellings with plan irregularity. The SAPWood software was used to perform a series of nonlinear time-history analyses for 480 representative models,...
The forces exerted on light-frame wood buildings as a result of surge and waves are not fully understood. With a better understanding of these types of forces, it may eventually be possible to build coastal structures to better withstand the loads. In this paper, a recent two part experimental study...
Abstract: Three novel curing agents ( I , II , and III) were synthesized
from epichlorohydrin and ammonium hydroxide.
The combinations of soy flour (SF) with one of the curing
agents (SF- I , SF- II , and SF- III ) were investigated as adhesives
for making interior plywood. Water...
Visual appeal of wood is as important as its
structural integrity in outdoor applications. Discoloration
and checking of wood favor the utilization of alternative
materials for outdoor cladding and decking. Lignin depolymerization
is one of the critical processes leading to
weathering. In the present paper, the potential of different
classes...
In this article, we present cradle-to-gate life-cycle inventory (LCI) data for wood fuel pellets manufactured in the Southeast United States. We surveyed commercial pellet manufacturers in 2010, collecting annual production data for 2009. Weighted-average inputs to, and emissions from, the pelletization process were determined. The pellet making unit process was...
Paleoclimate proxies based on the measurement of xylem cell anatomy have rarely been developed across the temperature range of a species or applied to wood predating the most recent millennium. Here we describe wood anatomy-based proxies for spring temperatures in central North America from modern bur oaks (Quercus macrocarpa Michx.)....
In the summer of 2009, a full-scale midrise wood-frame building was tested under a series of simulated earthquakes on the world's largest shake table in Miki City, Japan. The objective of this series of tests was to validate a performance-based seismic design approach by qualitatively and quantitatively examining the building's...
The specification, inspection, and remedial treatment of utility poles are addressed. Included are discussions of enhancing specifications for improved performance, techniques for detecting decay and other defects, and chemical treatments available for arresting decay of poles in service.
Student activities and instructor-made models are described to facilitate and encourage other instructors to develop their own appropriate activities and models for teaching the three-dimensional structure of wood.
The teaching activities include making several annual rings with straws pushed into clay, drawing wood’s structure onto a piece of paper that...
Of 14 transgenic poplar genotypes (Populus tremula × Populus alba) with antisense 4-coumarate:coenzyme A ligase that were grown in the field for 2 years, five that had substantial lignin reductions also had greatly reduced xylem-specific conductivity compared with that of control trees and those transgenic events with small reductions in...
Given the fundamental importance of xylem safety and efficiency for plant survival and fitness, it is not surprising that these are among the most commonly studied features of hydraulic architecture. However, much remains to be learned about the nature and universality of conflicts between hydraulic safety and efficiency. Although selection...
We studied xylem anatomy and hydraulic architecture in 14 transgenic insertion events and a control line of hybrid poplar (Populus spp.) that varied in lignin content. Transgenic events had different levels of down‐regulation of two genes encoding 4‐coumarate:coenzyme A ligase (4CL). Two‐year‐old trees were characterized after growing either as free‐standing...
In the Pacific north-west, the Cascade Mountain Range blocks much of the precipitation and maritime influence of the Pacific Ocean, resulting in distinct climates east and west of the mountains. The current study aimed to investigate relationships between water storage and transport properties in populations of Douglas-fir (Pseudotsuga menziesii) and...
Premise of the study: The Pacific Northwest of North America experiences relatively mild winters and dry summers. For the
tall coniferous trees that grow in this region, we predicted that loss in the hydraulic conductivity of uppermost branches would
be avoided because of difficulty reversing accumulated emboli in xylem that...
The dynamics of radio frequency (RF) laminated veneer lumber (LVL) pressing are explored for the purpose of optimizing this process. The RF LVL press at the Albany Trus Joist plant is the focus of this investigation. The investigation first focuses on bond strength development characteristics of the Georgia Pacific adhesive...
In investigating wood treatment as a possible processing option for Alaska forest products manufacturers, the double-diffusion method using sodium fluoride followed by a copper sulfate appeared to be the most advantageous approach. Yet, little information was available as to the chemical retention after treating and its resistance to leaching. Green...
The objective of this study is to complete life cycle inventories (LCI) for laminated veneer lumber (LVL) and composite I-joist (I-joist) production in the two main forest products producing regions in the U.S., the Pacific Northwest (PNW) and Southeast (SE). LVL and I-joists are composite wood building materials that are...
The gravitational component of water potential and frictional resistance during transpiration lead to substantial reductions in leaf water potential (Ψl) near the tops of tall trees, which can influence both leaf growth and physiology. We examined the relationships between morphological features and gas exchange in foliage collected near the tops...
Use of Granier-style heat dissipation sensors to measure sap flow is common in plant physiology, ecology and hydrology. There has been concern that any change to the original Granier design invalidates the empirical relationship between sap flux density and the temperature difference between the probes. Here, we compared daily water...
This study investigated the mechanisms involved in the
regulation of stomatal closure in Douglas-fir and evaluated
the potential impact of compensatory adjustments in
response to increasing tree height upon these mechanisms.
In the laboratory, we measured leaf hydraulic conductance
(Kleaf) as leaf water potential (Yl) declined for comparison
with in...
Douglas-fir trees from 39 open-pollinated families at four test locations were assessed to estimate heritability of modulus of elasticity (MOE) and basic density. After trees were felled, sound velocity was measured on 4-m logs with the Director HM200. Disks were taken to estimate dry and green wood density; dynamic MOE...
We determined the axial and radial xylem tension gradients in trunks of young Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) trees. Axial specific conductivity (ks-a) and sap flux density (Js) were measured at four consecutive depths within the sapwood at a stem height of 1 m. By definition, at a given position...
Wood density, moisture content, tracheid width and cell wall size were examined in trees from plots that were sprayed for 5 years with chlorothalonil (Bravo®) fungicide to reduce the impact of Swiss needle cast (SNC) and from trees in adjacent unsprayed plots. The unsprayed (more heavily diseased) trees had significantly...
1. The xylem pressure inducing 50% loss of hydraulic conductivity due to embolism
widely used for comparisons of xylem vulnerability among species and across aridity
However, despite its utility as an index of resistance to catastrophic xylem failure
drought, P5o may have no special physiological relevance in the context of...
Our goals were to quantify how non-embolism-inducing pressure gradients influence trunk sapwood specific conductivity (ks) and to compare the impacts of constant and varying pressure gradients on ks with KCl and H2O as the perfusion solutions. We studied six woody species (three conifers and three angiosperms) which varied in pit...
Bark plays a critical role in the life of a tree when it is standing. Once the tree is felled, however, bark has minimal value and
may be a net financial loss to the forest industry. Because of bark’s limited worth, logs are often bought and sold based on under...
• Hydraulic vulnerability of Douglas-fir (Pseudotsuga menziesii) branchlets
decreases with height, allowing shoots at greater height to maintain hydraulic
conductance (Kshoot) at more negative leaf water potentials (Ψl).
• To determine the basis for this trend shoot hydraulic and tracheid anatomical
properties of foliage from the tops of Douglas-fir trees...
• A technique for measuring in vitro respiration was investigated to understand why rates were higher than those reported in vivo and to elucidate trends within mature Pseudotsuga menziesii (Douglas‐fir) trees.
• Extracted increment cores were divided into 3–4 radial depths and a gas chromatograph was used to compare respiration...
• Compression wood has been shown to reduce stem permeability, but it is not known to what extent it affects leaf‐level processes. Here, we report whole‐plant hydraulic properties of Douglas‐fir (Pseudotsuga menziesii) seedlings induced to form varying amounts of compression wood.
• Seedlings were grown under three bending treatments to...
• Coniferous, diffuse‐porous and ring‐porous trees vary in their xylem anatomy, but the functional consequences of these differences are not well understood from the scale of the conduit to the individual.
• Hydraulic and anatomical measurements were made on branches and trunks from 16 species from temperate and tropical areas,...
• There are two optima for maximizing hydraulic conductance per vasculature volume in plants. Murray's law (ML) predicts the optimal conduit taper for a fixed change in conduit number across branch ranks. The opposite, the Yarrum optimum (YO), predicts the optimal change in conduit number for a fixed taper.
•...
The crooked stems of some individuals of radiata pine (Pinus radiata D. Don) can hinder volume recovery and wood quality. To infer causes of crookedness and to learn how angle affects compression wood (CW) formation we studied 4+1-year old trees in southern Chile. Eight initially straight and 8 initially crooked...
The relative importance of density, acoustic velocity, and microfibril angle (MFA) for the prediction of the stiffness (MOE) and strength (MOR) has not been well established for Douglas-fir (Pseudotsuga menziesii). MOE and MOR of small clear specimens of mature wood were better predicted by density and velocity than by either...
The air‐seeding hypothesis predicts that xylem embolism resistance is linked directly to bordered pit functioning. We tested this prediction in trunks, roots, and branches at different vertical and radial locations in young and old trees of Pseudotsuga menziesii. Dimensions of bordered pits were measured from light and scanning electron micrographs,...
This research investigated the longevity of functional connections between leaf traces and stem xylem in 16 species of conifers to better understand the spatial use of sapwood for water transport. The first question was which ring(s) stained when a vacuum was applied to the distal end of the cut surface...
Despite renewed interest in the nature of limitations on maximum tree height, the mechanisms governing ultimate and species-specific height limits are not yet understood, but likely involve water transport dynamics. Tall trees experience increased risk of xylem embolism from air-seeding because tension in their water column increases with height due...
While wood plastic composites have gained an increasingly large share of the market for decks and other outdoor structures, there are many questions about the long-term potential for biodeterioration of these materials. While the plastic does appear to retard moisture uptake, thereby slowing the rate of degradation, a number of...
While microbial colonization of wood is presumed to be characterized by a myriad of interactions between numerous organisms, studying these processes is often difficult owing to the opaque nature of the wood and the inability to readily distinguish among the many species colonizing the material. One method for enhancing the...
We sampled boles, branches, and roots of four Douglas-fir (Pseudotsuga menziesii var. menziesii) trees to learn a) whether branches and roots have a zone of juvenile wood, defined as a zone with progressive changes in wood density and/or tracheid length from the pith outward at successively greater cambial
ages, and...
The air permeability of western hemlock from coastal forests in western Oregon was assessed. Permeability varied widely among trees, as well as by position within individual trees. Permeability tended to decrease with distance inward from the bark, a trend implying that this species produces a heartwood zone. These variations may...
The cohesion-tension theory of water transport states that hydrogen bonds hold water molecules together and that they are pulled through the xylem under tension. This tension could cause transport failure in at least two ways: collapse of the conduit walls (implosion), or rupture of the water column through air-seeding. The...
The width of earlywood and latewood in conifer xylem may have a profound effect on water transport and storage, vulnerability to embolism, and wood strength, yet the controls over the timing of latewood formation are unclear. Tracheids differentiating in the cambial zone are influenced by IAA indole-3 acetic acid, the...
Cross-sectional disks were cut at two stem heights (1.5 m and 3.0 m) from 9-year-old trees of three Populus clones grown in an intensively-cultured plantation in western Washington. At age 1.5 years, when the trees averaged 3.4 m tall, half of the trees were pruned by removing all branches below...
This paper reviews literature on the formation of heartwood and on the components that affect natural durability. It includes discussion about the function of heartwood in living trees, factors influencing the natural durability of heartwood, the process of heartwood formation, and variations in heartwood quantity and quality. Heartwood formation is...
It would be valuable economically to know what are the biological triggers for formation of mature wood (currently of high value) and (or) what maintains production of juvenile wood (currently of low value), to develop silvicultural regimes that control the relative production of the two types of wood. Foresters commonly...
Isolation, detection with diagnostic polymerase chain reaction (PCR), and microscopy demonstrated the presence of Phytophthora ramorum in the sapwood of mature, naturally infected tanoak (Lithocarpus densiflorus) trees. The pathogen was strongly associated with discolored sapwood (P < 0.001), and was recovered or detected from 83% of discolored sapwood tissue samples....