Zinc Sulfide (ZnS) thin film, with a wide band gap, has been used for many applications, such as buffer layer for CIGS solar cells, light emitting diodes and thin film electroluminescent devices.
In this work, ZnS thin films were prepared using two different deposition processes. In the first method, ZnS...
Inkjet-printed p-type copper(I) iodide-based TFTs were successfully fabricated. As-printed copper(I) halide semiconductor films, such as CuI, CuBrI, and CuClI, were used as p-type active channel layers for TFTs. The entire process of the TFTs fabrication was maintained under 150 °C, which is compatible with flexible plastic substrates and transparent glass...
The various solution-based processes, spin coating, inkjet printing, microreactor assisted nanoparticle deposition (MANDTM) and spin-successive ionic layer absorption and reaction (Spin-SILAR) were used to demonstrate thin film electronics and anti-reflective coatings. Several aspects of thin film transistors (TFTs) were tested including a range of temperatures, annealing atmosphere, and deposition methods....
Digital printing techniques offer several advantages in manufacturing electronics such as direct writing of materials, reduction of chemical waste, and scalability. In particular, printing can significantly simplify manufacturing processes by directly defining the channel area, the gate, and the source and drain contacts, allowing for lower costs and higher throughput...
Photoluminescence (PL) materials have attracted a lot of attention in last several decades. Recently PL materials, which can convert low-efficiency Ultraviolet (UV) or Infrared (IR) light to high-efficiency visible light, have been widely applied in the research of improving conversion efficiency of solar cell. As one of the most common...
Transparent and electrically conductive metal oxide nanoparticles have attracted much attention, and can be used to improve the performance of solar cells, transparent electrode materials, and gas sensor technology. Specifically, indium tin oxide (ITO) nanocrystals (NCs) are potentially useful nanomaterials, having technological applications in enhanced sensitivity of optical spectroscopy due...
CuInGaSe₂ (CIGS), a promising thin film solar cell material, has gained lots of
attention in decades due to its high energy conversion efficiency and potential lower
manufacture cost over conventional Si solar cells. As a cheaper processing method
compared to vacuum-based techniques, solution-based deposition has been
successfully applied to fabricate...
Recent advances in nanocrystalline materials production are expected to impact the development of next generation low-cost and/or high efficiency solar cells. For example, semiconductor nanocrystal inks are used to lower the fabrication cost of the absorber layers of the solar cells. In addition, some quantum confined nanocrystals display electron-hole pair...
As a group of promising semiconductor materials, metal chalcogenides in thin film form have been widely used in electronics and optoelectronics applications, such as solar cell devices and photon sensors. Unfortunately, the film size and product throughput are limited by the current vacuum-based thin film deposition techniques. Solution-based thin film...
Copper sulfides (Cu[subscript x]S) are compound semiconductor materials that exhibit considerable optical and electrical properties varying significantly as a function of the composition. Copper sulfide thin films can be used in many applications, such as solar control coatings, solar cells, photothermal conversion of solar energy, electroconductive coatings, and microwave shielding...