Search Constraints

Start Over
Filtering by: Creator Blake, Thomas A. Remove constraint Creator: Blake, Thomas A. Advisor Gupta, Rakesh Remove constraint Advisor: Gupta, Rakesh

Search Results

  • Load Path Investigation in a Light-Frame Wood House with Complex Geometry

    Creator:
    Holman, Justin D.
    Abstract:
    The objective of this study was to investigate load paths in an existing light-frame wood structure with complex geometry, using previously established computer modeling methods. The structural model is derived from an existing, multi-level residence located in Corvallis, Oregon. For the purpose of this study, the existing structure was simplified...
    Resource Type:
    Masters Thesis
    Full Text:
    September 20, 2019 Title: Load Path Investigation in a Light-Frame Wood House with Complex Geometry

  • A practical approach to model the behavior of a metal-plate-connected wood truss system

    Creator:
    Li, Zhong
    Abstract:
    Metal-plate-connected (MPC) trusses have traditionally been designed based on a tributary load distribution and a simplified truss model. This design method ignores the load-sharing and composite action in MPC roof truss systems, the semi-rigidity of MPC joints, and joint eccentricity. The main objective of this study was to provide a...
    Resource Type:
    Masters Thesis

  • A practical method to analyze the system effects of a metal-plate-connected wood truss assembly

    Creator:
    Dung, Da-Ren
    Abstract:
    This study presents a practical method to model an actual Metal-Plate- Connected (MPC) roof truss assembly using a commercial program, SAP2000, to investigate its system performance. Truss assembly modeling was examined because the conventional single truss design method ignores system effects, such as variability of modulus of elasticity (MOE), interaction...
    Resource Type:
    Masters Thesis

  • Light-frame versus timber frame : a study in quantifying the differences

    Creator:
    Malone, Brian P.
    Abstract:
    The objective of this study was to compare light wood framing and traditional timber framing quantitatively through environmental impact assessment and load path analysis. This research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and the design of structures considered within reflect the general characteristics...
    Resource Type:
    Masters Thesis
    Full Text:
    and Civil Engineering presented on June 7, 2013 Title: Light-Frame versus Timber Frame: A Study

  • Practical modeling for load paths in a realistic, light-frame wood house

    Creator:
    Pfretzschner, Kathryn S.
    Abstract:
    The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
    Resource Type:
    Masters Thesis
    Full Text:
    Load Paths in a Realistic, Light-Frame Wood House  Abstract approved: Rakesh Gupta Thomas H

  • Evaluation of remediation techniques for circular holes in the webs of wood I-joists

    Creator:
    Polocoser, Tiberiu
    Abstract:
    The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: Rakesh Gupta Thomas H. Miller The objective of this project was

  • Lateral Load Path Analysis : Practical Methods for Light-Frame Modular Structures

    Creator:
    Huynh, Thanh Q.
    Abstract:
    The objectives of this study are to use SAP2000 to investigate lateral load paths and system behavior in a modular, light-frame wood structure by investigating different foundation configurations and to further develop and validate existing modeling techniques of shear wall elements based on the Perforated Shear Wall Method. The modeling...
    Resource Type:
    Masters Thesis
    Full Text:
    Methods for Light-Frame Modular Structures Abstract approved: Rakesh Gupta Thomas H. Miller

  • Behavior of Cross-Laminated Timber Diaphragm Panel-to-Panel Connections with Self-Tapping Screws

    Creator:
    Sullivan, Kyle
    Abstract:
    The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
    Resource Type:
    Masters Thesis
    Full Text:
    : _____________________________________________________________________ Thomas H. Miller Rakesh Gupta The goal of this project is to contribute to the

  • Characterizing perpendicular-to-grain compression in wood construction applications

    Creator:
    Basta, Craig Thomas
    Abstract:
    Current compression perpendicular-to-grain (c-perp) design values for wood members are based on mean stress using the ASTM D143 specimen. Base design value, as determined from 0.04-in deformation in the ASTM specimen, is applied to all c-perp applications. While the standard ASTM test was presumably believed to adequately reflect relevant c-perp...
    Resource Type:
    Masters Thesis

  • Monotonic and Cyclic Testing of Cross-Laminated Timber Diaphragms

    Creator:
    Beairsto, Cody J.
    Abstract:
    Mass timber is emerging as a viable form of construction around the world in new markets for wood buildings. The entrance into these markets has driven the demand for more knowledge to enable designs alongside other structural materials such as steel and reinforced concrete. Large, in-plane tests on cross-laminated timber...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Rakesh Gupta Thomas H. Miller Abstract Mass timber is emerging as a viable form of