Search Constraints

Start Over
Filtering by: Creator Downs, Leslie E. Remove constraint Creator: Downs, Leslie E. Advisor Gupta, Rakesh Remove constraint Advisor: Gupta, Rakesh

Search Results

  • The effect of hold-down misplacement on the strength and stiffness of wood shear walls

    Creator:
    Lebeda, Dana J.
    Abstract:
    The objective of this study was to determine the effect of misplaced hold-downs on the static and cyclic behavior of wood shear walls. Three shear wall configurations were considered in this study. The first configuration (control) had hold-downs at the ends of the wall (wall type 1), the second configuration...
    Resource Type:
    Masters Thesis
    Full Text:
    Engineering and Wood Science presented on August 1. 2002. Title: The Effect of Hold-down Misplacement on the

  • Performance of partially and fully anchored wood frame shear walls under monotonic, cyclic and earthquake loads

    Creator:
    Seaders, Peter
    Abstract:
    The objectives of this study were to evaluate the performance of wood frame shear walls under monotonic, cyclic and earthquake loads by: (1) estimating the variability of shear wall performance, (2) comparing the performance of walls under each loading protocol, (3) evaluating the effects of anchorage on wall performance, and...
    Resource Type:
    Masters Thesis
    Full Text:
    identical to partially anchored walls except that SIMPSON Strong-Tie® PHD-2A hold-downs were installed at

  • Strain distribution in OSB and GWB in wood frame shear walls

    Creator:
    Sinha, Arijit
    Abstract:
    The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
    Resource Type:
    Masters Thesis
    Full Text:
    anchor bolts, walls included hold-downs installed at the end studs of the wall and were attached to the

  • Lateral Load Path Analysis : Practical Methods for Light-Frame Modular Structures

    Creator:
    Huynh, Thanh Q.
    Abstract:
    The objectives of this study are to use SAP2000 to investigate lateral load paths and system behavior in a modular, light-frame wood structure by investigating different foundation configurations and to further develop and validate existing modeling techniques of shear wall elements based on the Perforated Shear Wall Method. The modeling...
    Resource Type:
    Masters Thesis
    Full Text:
    ..................................................................................... 139 Appendix A.1.4: MASA Hold-Downs

  • Practical modeling for load paths in a realistic, light-frame wood house

    Creator:
    Pfretzschner, Kathryn S.
    Abstract:
    The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
    Resource Type:
    Masters Thesis
    Full Text:
    Figure E-4: Local Axes for Anchor Bolts and Hold-downs (Martin 2010) ....................102 Figure E

  • The performance of wood frame shear walls under earthquake loads

    Creator:
    White, Kevin Bradish DelGrande
    Abstract:
    The overall goal of this study is to evaluate the earthquake performance of wood frame shear walls, and more specifically: (1) to compare the performance differences of fully and partially anchored walls under monotonic, cyclic, and earthquake loads, (2) to compare wall performance under earthquake loads with that of standardized...
    Resource Type:
    Masters Thesis
    Full Text:
    addition of two SIMPSON Strong-Tie® PHD-2 hold- downs installed to double end studs. Each hold-down was

  • Load Path Investigation in a Light-Frame Wood House with Complex Geometry

    Creator:
    Holman, Justin D.
    Abstract:
    The objective of this study was to investigate load paths in an existing light-frame wood structure with complex geometry, using previously established computer modeling methods. The structural model is derived from an existing, multi-level residence located in Corvallis, Oregon. For the purpose of this study, the existing structure was simplified...
    Resource Type:
    Masters Thesis
    Full Text:
    represent hold downs, while the intermediate horizontal and vertical springs represent anchor bolts

  • Evaluation of system effects and structural load paths in a wood-framed structure

    Creator:
    Martin, Kenneth G.
    Abstract:
    The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
    Resource Type:
    Masters Thesis
    Full Text:
    Stiffness of Hold-downs and Anchor Bolts .................................. 11 Material Properties

  • Light-frame versus timber frame : a study in quantifying the differences

    Creator:
    Malone, Brian P.
    Abstract:
    The objective of this study was to compare light wood framing and traditional timber framing quantitatively through environmental impact assessment and load path analysis. This research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and the design of structures considered within reflect the general characteristics...
    Resource Type:
    Masters Thesis
    Full Text:
    ............................................... 129  Appendix E: Design Wind Pressure Calculation

  • Performance of wood frame wall with thin shell ECC shear panel

    Creator:
    Lewis, Michael C.
    Abstract:
    The overall goal of this study was to evaluate an alternative to traditional wood framed shear wall construction. This study introduced the innovative idea of using a water and seismic damage resistant, wood-concrete- composite (WCC) construction instead of an all-wood design. The WCC design consisted of a thin shell of...
    Resource Type:
    Masters Thesis
    Full Text:
    Monotonic Strength and Stiffness Values per ASTM E 564