Index Catalog // ScholarsArchive@OSU

Dynamic behavior of metal-plate-connected wood truss joints

Creator:: Kent, Scott M.
Abstract:: The objectives of this research were to evaluate the behavior of actual metal-plate-connected (MPC) tension-splice and heel wood truss joints under seismic loads from the Northridge earthquake (tension-splice joints only) and under loads from a large artificial earthquake (1.0 g's and 0.67 g's maximum horizontal and vertical accelerations, respectively). A...
Resource Type:: Masters Thesis

Small-scale modeling of metal-plate-connected wood truss joints

Creator:: Kittel, Mark
Abstract:: The objective of this research was to develop a one-third scale model of full-size (prototype) metal-plate-connected (MPC) wood truss joints using similitude theory. The prototype metal connector plates in MPC joints were modeled using thin galvanized sheet metal and short staples. Truss grade wood material was ripped to one-third scale...
Resource Type:: Masters Thesis

Short-term duration of load and cyclic performance of metal-plate-connected truss joints

Creator:: Freilinger, Shawn M. Wicks
Abstract:: The objective of this research was to evaluate the duration of load factor for metal-plate-connected (MPC) truss joints subjected to various cyclic loading conditions. Heel and tension-splice joints from a standard 30-foot span Fink truss constructed from nominal 2x4 Douglas-fir lumber were tested. A testing frame similar to that developed...
Resource Type:: Masters Thesis

System behavior of three-dimensional wood truss assemblies

Creator:: Limkatanyoo, Pranueng
Abstract:: The objective of this research is to use a three-dimensional (3D) analysis method to include 'system effects' directly in the design of light-frame roof truss assemblies. The goal of this study is to develop an improved and practical method to determine the structural performance of 3D roof truss assemblies used...
Resource Type:: Masters Thesis

A practical approach to model the behavior of a metal-plate-connected wood truss system

Creator:: Li, Zhong
Abstract:: Metal-plate-connected (MPC) trusses have traditionally been designed based on a tributary load distribution and a simplified truss model. This design method ignores the load-sharing and composite action in MPC roof truss systems, the semi-rigidity of MPC joints, and joint eccentricity. The main objective of this study was to provide a...
Resource Type:: Masters Thesis

Performance of partially and fully anchored wood frame shear walls under monotonic, cyclic and earthquake loads

Creator:: Seaders, Peter
Abstract:: The objectives of this study were to evaluate the performance of wood frame shear walls under monotonic, cyclic and earthquake loads by: (1) estimating the variability of shear wall performance, (2) comparing the performance of walls under each loading protocol, (3) evaluating the effects of anchorage on wall performance, and...
Resource Type:: Masters Thesis
Full Text:: Engineering Major Professor, Represering Wood Science Head of the Department of Civil, Construction and

The effect of hold-down misplacement on the strength and stiffness of wood shear walls

Creator:: Lebeda, Dana J.
Abstract:: The objective of this study was to determine the effect of misplaced hold-downs on the static and cyclic behavior of wood shear walls. Three shear wall configurations were considered in this study. The first configuration (control) had hold-downs at the ends of the wall (wall type 1), the second configuration...
Resource Type:: Masters Thesis
Full Text:: illustrates that there may be some problems in the design and/or construction of wood frame buildings, even

Slotted-bolted friction damper as a seismic energy dissipator in a braced timber frame

Creator:: Tjahyadi, Alfred
Abstract:: Friction dampers have been used successfully to dissipate seismic energy in steel and concrete structures. The application is new to timber structures. The objectives of this research were to design a slotted bolted connection (SBC) and evaluate its potential as a passive energy damper in timber brace. The research was...
Resource Type:: Masters Thesis
Full Text:: Engineering I' Head of Department f Wood Science and Engineering Head of Department of Civil, Construction

Evaluation of system effects and structural load paths in a wood-framed structure

Creator:: Martin, Kenneth G.
Abstract:: The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
Resource Type:: Masters Thesis
Full Text:: Head of the School of Civil and Construction Engineering Dean of the Graduate School I

Practical modeling for load paths in a realistic, light-frame wood house

Creator:: Pfretzschner, Kathryn S.
Abstract:: The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
Resource Type:: Masters Thesis
Full Text:: Acting Head of the School of Civil and Construction Engineering Dean of the Graduate School

ScholarsArchive@OSU

Dynamic behavior of metal-plate-connected wood truss joints

Small-scale modeling of metal-plate-connected wood truss joints

Short-term duration of load and cyclic performance of metal-plate-connected truss joints

System behavior of three-dimensional wood truss assemblies

A practical approach to model the behavior of a metal-plate-connected wood truss system

Performance of partially and fully anchored wood frame shear walls under monotonic, cyclic and earthquake loads

The effect of hold-down misplacement on the strength and stiffness of wood shear walls

Slotted-bolted friction damper as a seismic energy dissipator in a braced timber frame

Evaluation of system effects and structural load paths in a wood-framed structure

Practical modeling for load paths in a realistic, light-frame wood house

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search