The fouling characteristics of simulated cooling tower water flowing over a heated metallic surface has been studied. The bulk temperature of the water was maintained around 95°F. Mainly three different water qualities with respect to calcium hardness level were investigated. The pH was controlled by the addition of hydrochloric acid....
Momentum transfer in an annular duct with upward gas-Iiquid
flow was studied under the condition that the liquid flowed as a film
only on the inner core of the annulus, the outer wall remaining dry.
Previous workers have studied climbing and falling liquid
films in tubes or on vertical planes....
Deposition characteristics of magnesium silicate and calcium carbonate on a heated surface in cooling tower water using city water as make-up was investigated. Flow velocity, bulk temperature and calcium hardness were maintained constant at 5.3 ft/ sec, 95°F and 150 ppm as CaCO₃ respectively whereas surface temperature varied from 105°F...
The fouling of cooling tower water was investigated as
a function of heater surface temperature and water quality.
In particular, the effects on fouling of the addition of
calcium in excess of the amounts required for saturation
were examined.
First, the average bulk water temperature was 97 ± 1
degree...
Drop size distributions produced by the turbulent pipe flow of
dispersions of immiscible liquids were measured photographically.
A mathematical model was developed which predicted both the shape
of the experimentally observed distributions and the experimentally
observed kinetics of the breakup process.
The mutually saturated water and organic phases were pumped...
The fouling characteristics of cooling tower water
containing various corrosion inhibitors and other additives
on heat transfer surface have been investigated. Corrosion
inhibitors investigated included zinc-chromate and
phosphates. In addition, additives including polyacrylate
and phosphonate (HEDP and AMP) were used to determine their
effectiveness as antifoulants.
The tests were conducted...
Momentum transfer in climbing-film flow in an annular duct was
investigated. Air and various liquids, with a wide range of viscosities
and surface tensions, were investigated. The two phases flowed co-currently
upward, the liquid climbing as a thin film on the inner wail
while the outer wall remained dry.
The...
Heat transfer from the inner wall of an annulus to subcooled
water in turbulent parallel flow was studied. The inner core of the
annulus consisted of wires varying from 0.0019 to 0.0197 inch in
diameter. The outer tube consisted of a 1.01 inch diameter glass
tube 24 inches long. Diameter...