An analysis that accounts for the effect of standard electrostatic discharge (ESD) structures on critical LNA specifications of noise figure, input matching and gain is presented. It is shown that the ESD structures degrade LNA performance particularly for higher frequency applications. Two LNAs, one with ESD protection and one without,...
Algorithms and simulators comprised of SPICE3 as a circuit level simulator and two device simulators EOFLOW and PROPHET for accurate simulation of new types of devices are presented in this thesis. An integration of EOFLOW with SPICE3 creates a capability for efficient simulation of a system containing interconnected electroosmotic flow...
This thesis presents an automated methodology to calibrate the substrate profile for accurate prediction of substrate parasitics using Green's function based extractors. The technique requires fabrication of only a few test structures and results in an accurate three layered approximation of a heavily doped epitaxial silicon substrate. The obtained substrate...
A scalable macromodel for substrate noise coupling in lightly doped substrates with and without a buried layer has been developed. This model is based on Z-parameters and is scalable with contact size and separation. This model requires process dependent parameters that can be extracted easily from a small number of...
The dependence of the substrate resistance, R[subscript sub], for MOS transistor RF modeling on transistor biasing and layout is studied from device simulations and measurements. Though R[subscript sub] is found to be bias dependent, the error incurred by assuming a constant value equal to the DC resistance is not significant....
This thesis presents algorithms and tools for the automated design of RF LC CMOS voltage controlled oscillators (VCOs) with low phase noise given a set of specifications. The electromagnetic solver, ASITIC, combined with the circuit simulator, SpectreRF, allows optimization of the VCO circuit parameters and inductor layout. This approach gives...
This thesis examines substrate noise coupling for NMOS transistors in heavily doped substrates. The study begins with the analysis of an NMOS transistor switching noise in a digital inverter at the device level. A resistive substrate network for the NMOS transistor is proposed and verified. Coupling between N+- P+ contacts...
The focus of this work is on the steady-state analysis of RE circuits using a coupled device and circuit simulator. Efficient coupling algorithms for both the time-domain shooting method and the frequency-domain harmonic balance method have been developed. A modified Newton shooting method considerably improves the efficiency and reliability of...
This thesis presents the contributions to substrate noise due to supply coupling and the effect of pin parasitics on the substrate noise generated by digital circuits. Various sources of substrate noise and their effect on analog circuits sharing the same substrate are discussed. A simulation approach to isolate the various...
This thesis presents distinctly different methods of accurately predicting phase noise and absolute jitter in ring oscillators. The phase noise prediction methods are the commercially available SpectreRF and isf_tool, a simulator developed in this work from the Hajimiri and Lee theory of phase noise. Absolute jitter due to deterministic supply...