An analysis that accounts for the effect of standard electrostatic discharge (ESD) structures on critical LNA specifications of noise figure, input matching and gain is presented. It is shown that the ESD structures degrade LNA performance particularly for higher frequency applications. Two LNAs, one with ESD protection and one without,...
Algorithms and simulators comprised of SPICE3 as a circuit level simulator and two device simulators EOFLOW and PROPHET for accurate simulation of new types of devices are presented in this thesis. An integration of EOFLOW with SPICE3 creates a capability for efficient simulation of a system containing interconnected electroosmotic flow...
This thesis presents an automated methodology to calibrate the substrate profile for accurate prediction of substrate parasitics using Green's function based extractors. The technique requires fabrication of only a few test structures and results in an accurate three layered approximation of a heavily doped epitaxial silicon substrate. The obtained substrate...
A scalable macromodel for substrate noise coupling in lightly doped substrates with and without a buried layer has been developed. This model is based on Z-parameters and is scalable with contact size and separation. This model requires process dependent parameters that can be extracted easily from a small number of...
The dependence of the substrate resistance, R[subscript sub], for MOS transistor RF modeling on transistor biasing and layout is studied from device simulations and measurements. Though R[subscript sub] is found to be bias dependent, the error incurred by assuming a constant value equal to the DC resistance is not significant....
This thesis presents algorithms and tools for the automated design of RF LC CMOS voltage controlled oscillators (VCOs) with low phase noise given a set of specifications. The electromagnetic solver, ASITIC, combined with the circuit simulator, SpectreRF, allows optimization of the VCO circuit parameters and inductor layout. This approach gives...
This thesis examines substrate noise coupling for NMOS transistors in heavily doped substrates. The study begins with the analysis of an NMOS transistor switching noise in a digital inverter at the device level. A resistive substrate network for the NMOS transistor is proposed and verified. Coupling between N+- P+ contacts...
The focus of this work is on the steady-state analysis of RE circuits using a coupled device and circuit simulator. Efficient coupling algorithms for both the time-domain shooting method and the frequency-domain harmonic balance method have been developed. A modified Newton shooting method considerably improves the efficiency and reliability of...
This thesis presents the contributions to substrate noise due to supply coupling and the effect of pin parasitics on the substrate noise generated by digital circuits. Various sources of substrate noise and their effect on analog circuits sharing the same substrate are discussed. A simulation approach to isolate the various...
This thesis presents distinctly different methods of accurately predicting phase noise and absolute jitter in ring oscillators. The phase noise prediction methods are the commercially available SpectreRF and isf_tool, a simulator developed in this work from the Hajimiri and Lee theory of phase noise. Absolute jitter due to deterministic supply...
A methodology for rapid estimation of substrate noise generated by digital circuitry in mixed-signal circuits is presented. This methodology is incorporated into the Silencer! framework, and also provides for future improvements including pre-layout noise estimation. Measurements of a test chip fabricated in the TSMC o.25[mu]m heavily doped logic process validate...
An analysis of substrate noise coupling in mixed-signal circuits has been performed in the TSMC 0.25 [mu]m lightly doped and heavily doped CMOS processes. Methods to minimize noise coupling in both the chip design and board design phases are presented along with techniques for accurate circuit simulation of noise coupling....
A new method is presented to compress switching information in large digital circuits. This is combined with an efficient approach of generating the noise signatures of cells in a digital library that results in an accurate and efficient approach for estimating the noise generated in digital circuits. This method provides...
As the demand for real-time information in engineering and health care systems keeps increasing, the need for wireless sensor nodes is also continuously increasing. As a result, the cost and effort involved in installing and maintaining batteries to power the numerous sensor nodes is growing exponentially. Providing a cost effective...
A fully integrated CMOS latched comparator is presented for use as a wake-up circuit that is attached to an RF energy harvester in a battery free wireless sensor network. The system consumes less than 36nA static current at 20°C and dissipates 2pJ of energy per conversion. The comparator comprises of...
Three types of low noise amplifiers operating at 2.4GHz were designed. They are the commonly used single-ended and differential amplifiers as well as a new quasi-differential amplifier. The substrate noise injected into these amplifiers is examined for both heavily and lightly doped CMOS substrates. For the single-ended amplifier the noise...
Strategies for simulation and measurement of substrate noise have been analyzed using various digital and analog circuits fabricated in the TSMC 0.35um heavily doped CMOS process. The measurements validate a substrate noise coupling macromodel that has been used to obtain the simulation results. The simulations and measurements also substantiate the...
This work focusses on the modeling and the development of efficient coupled simulation techniques for MEMS based RF oscillators. High-level models for MEMS based varactors have been discussed and their accuracy issues are identified, based on comparisons with numerical simulations. A faster simulation approach based on the time-domain shooting method...
This thesis presents Silencer!, a fully automated, schematic-driven tool for substrate noise coupling simulation and analysis. It has been integrated in the CADENCE DFII environment and seamlessly enables substrate coupling analysis in a standard mixed-signal design flow. Silencer! aids IC designers in the analysis of substrate noise coupling at different...
A new coupled circuit and electrostatic/mechanical simulator (COSMO) for the design of RF MEMS VCOs is presented in this thesis. The numerical solution of device level equations is used to accurately compute the capacitance of a MEMS capacitor. This coupled with a circuit simulator facilitates the simulation of circuits incorporating...