Radiation induced heat generation rates of several nonfissionable materials were measured calorimetrically in a nuclear reactor environment. The calorimeter was uniquely designed to allow many materials of grossly different heat generation rates to be measured. heat transfer characteristics of the calorimeter were determined analytically and experimentally. Materials were chosen to...
Heat transfer and fluid mechanical behavior of water
flowing horizontally in vertically-narrow rectangular
channels was studied in this work. Friction factor and
Nusselt number variations were determined experimentally
for four different wall heating conditions, and for aspect
ratios(height to width) of 5, 4, 3, 2, and 1. Wall
heating conditions...
The heat-transfer mechanism studied in this experiment was
pool boiling from a flat horizontal surface facing upward with the
bulk liquid at its saturation temperature. The hot-film anemometer
probe was introduced to boiling heat-transfer analysis as a possible
device for counting active nucleation sites and for other investigations
such as...
This thesis examines the transient and steady-state temperature performance
of a rotary regenerative heat exchanger. In contrast to previous
studies on this problem, fluid flow in the circumferential direction was
considered. Appropriate modeling was included to measure the effect of
carry-over on the differential equations describing mass and energy
conservation....