Index Catalog // ScholarsArchive@OSU

An experimental study of fluid flow and heat transfer in rectangular microchannels

Creator:: Popescu, Aristotel
Resource Type:: Dissertation
Full Text:: Flow and Heat Transfer in Rectangular Microchannels. Abstract approved: James R. This thesis reports

Numerical study of natural convection in square partitioned and non-partitioned enclosures

Creator:: Sukkaset, Prasart
Abstract:: Heat transfer characteristics and associated temperature and flow fields for natural convection in two-dimensional, square, partitioned and non-partitioned enclosures have been determined for Grashof numbers ranging from 10³ to 10⁶. The vertical side walls of the enclosure are isothermal with all other surfaces assumed to be adiabatic. An adiabatic partition...
Resource Type:: Dissertation
Full Text:: privacy Prqgessor James R. Wel Heat transfer characteristics and associated tem- perature and flow

An investigation into the mechanisms of adherence between borosilicate glass and steatite ceramic and between borosilicate glass and alumina ceramic

Creator:: Peck, Roger Lee
Abstract:: A qualitative evaluation was made of the adherence between borosilicate glass and the ceramics, steatite and alumina. Three basic adherence studies were performed. (1) A comparison between the x-ray diffraction patterns of the ceramic and the fused glass-ceramic powder mixture was made to determine if any new compounds were formed...
Resource Type:: Masters Thesis
Full Text:: powder mixture was made to determine if any new compounds were formed at 1200°C. (2) A metallographic

Monte Carlo simulation of radiation heat transfer in a three-dimensional enclosure containing a circular cylinder

Creator:: Hong, Seung-Ho
Resource Type:: Masters Thesis
Full Text:: , Dr. James R. Welty, for his encouragement and guidance throughout the course of this study. Thanks

An analytical model of heat transfer to a horizontal cylinder immersed in a gas fluidized bed

Creator:: Adams, Ronald Lynn
Abstract:: A steady gas convection model of heat transfer to a horizontal cylinder immersed in a gas fluidized bed is presented. Contributions due to flow within attached bubbles as well as the interstitial voids are included. The interstitial flow is approximated as flow within a series of double cusped channels and...
Resource Type:: Dissertation
Full Text:: Abstract approved: James R. Welty/ A steady gas convection model of heat transfer to a horizontal

An explicit finite-difference solution for natural convection in air in rectangular enclosures

Creator:: Pagnani, Bruno Richard
Resource Type:: Dissertation
Full Text:: DOCTOR OF PHILOSOPHY (Name) (Degree) in MECHANICAL ENGINEERING presented on \,-1 \c l(. (Major) (bate

Heat generation rates of nonfissionable materials in a nuclear reactor environment

Creator:: Zimmerman, Paul James
Abstract:: Radiation induced heat generation rates of several nonfissionable materials were measured calorimetrically in a nuclear reactor environment. The calorimeter was uniquely designed to allow many materials of grossly different heat generation rates to be measured. heat transfer characteristics of the calorimeter were determined analytically and experimentally. Materials were chosen to...
Resource Type:: Masters Thesis
Full Text:: Rates of Nonfissionable Materials In A Nuclear Reactor Environment by Paul James Zimmerman A THESIS

An experimental study of forced convection heat transfer to non-Newtonian fluids in the thermal entry region of a horizontal, uniformly heated, circular pipe

Creator:: Bassett, Charles Earl
Resource Type:: Dissertation
Full Text:: for Privacy James R. elty An experimental study was made of heat transfer to the laminar flow of

A numerical solution for heat transfer to non-Newtonian fluids with temperature-dependent viscosity for arbitrary conditions of heat flux and surface temperature

Creator:: Cochrane, G. F. (Glenn Frank)
Resource Type:: Dissertation
Full Text:: dimensionless momentum equation 1 r 8X aR 8U au, _ dP c. a 2 aR u s au 8S au Pr V ' aR OR OR are solved

Cold trap performance : a general analysis

Creator:: Rothwell, Micheal Olin
Abstract:: A cold trap is a device used to remove certain impurities from a liquid metal by controlled precipitation of such impurities. An investigation of the thermal characteristics of laminar flow in two air-cooled cold traps was made. This investigation showed that the sodium heat transfer rate is a function of...
Resource Type:: Masters Thesis
Full Text:: . James R. Welty, Oregon State University; Dr. Richard E. Collingham and C. E. Linderoth, Manager, Sodium

ScholarsArchive@OSU

An experimental study of fluid flow and heat transfer in rectangular microchannels

Numerical study of natural convection in square partitioned and non-partitioned enclosures

An investigation into the mechanisms of adherence between borosilicate glass and steatite ceramic and between borosilicate glass and alumina ceramic

Monte Carlo simulation of radiation heat transfer in a three-dimensional enclosure containing a circular cylinder

An analytical model of heat transfer to a horizontal cylinder immersed in a gas fluidized bed

An explicit finite-difference solution for natural convection in air in rectangular enclosures

Heat generation rates of nonfissionable materials in a nuclear reactor environment

An experimental study of forced convection heat transfer to non-Newtonian fluids in the thermal entry region of a horizontal, uniformly heated, circular pipe

A numerical solution for heat transfer to non-Newtonian fluids with temperature-dependent viscosity for arbitrary conditions of heat flux and surface temperature

Cold trap performance : a general analysis

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

Language

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search