Radiation induced heat generation rates of several nonfissionable materials were measured calorimetrically in a nuclear reactor environment. The calorimeter was uniquely designed to allow many materials of grossly different heat generation rates to be measured. heat transfer characteristics of the calorimeter were determined analytically and experimentally. Materials were chosen to...
An experimental study of the properties of plane jets issuing at various angles into a cross-flow of air was conducted to obtain information relating to the momentum diffusion properties of the jet flow in order to provide a background for predicting the feasibility of the preswirl concept of the Volumetric...
Heat transfer characteristics and associated temperature and flow fields for natural convection in two-dimensional, square, partitioned and non-partitioned enclosures have been determined for Grashof numbers ranging from 10³ to 10⁶. The vertical side walls of the enclosure are isothermal with all other surfaces assumed to be adiabatic. An adiabatic partition...
A cold trap is a device used to remove certain impurities from
a liquid metal by controlled precipitation of such impurities.
An investigation of the thermal characteristics of laminar flow
in two air-cooled cold traps was made. This investigation showed
that the sodium heat transfer rate is a function of...
This thesis is concerned with the analysis of heat transfer in a tube with forced flow under conditions of an arbitrary variation of wall heat flux both axially and circumferentially. This total study is separated into two distinct problems which are presented separately. The first is the case of a...
A theoretical study of the heat and momentum transfer resulting
from a flow of power plant condenser effluent discharged vertically to
shallow, quiescent coastal receiving water is presented. The complete
partial differential equations governing steady, incompressible, turbulent
flow driven by both initial momentum and buoyancy are solved
using finite-difference techniques...
The heat-transfer mechanism studied in this experiment was
pool boiling from a flat horizontal surface facing upward with the
bulk liquid at its saturation temperature. The hot-film anemometer
probe was introduced to boiling heat-transfer analysis as a possible
device for counting active nucleation sites and for other investigations
such as...