Index Catalog // ScholarsArchive@OSU

Shear capacity assessment of corrosion-damaged reinforced concrete beams

Creator:: Farrow, William C.
Abstract:: The research presented here is a study to determine the effect of shear reinforcement corrosion on the shear capacity in conventionally reinforced concrete (CRC) bridge elements. A total of 14 CRC beams were tested using three stirrup spacings (8, 10, and 12-inch). Six of the beams included the influence of...
Resource Type:: Masters Thesis
Full Text:: Assessment of Corrosion-Damaged Reinforced Concrete Beams Abstract Approved: Christopher C. Higgins The

Freeze-thaw durability of reinforced concrete deck girders strengthened for shear with surface-bonded carbon fiber-reinforced polymer

Creator:: Mitchell, Mikal Maxwell
Abstract:: Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) U-wraps for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged freeze-thaw cycling. CFRP...
Resource Type:: Masters Thesis
Full Text:: presented on July 8, 2008. Title: Freeze-Thaw Durability of Reinforced Concrete Deck Girders

Shear repair methods for conventionally reinforced concrete girders and deep beams

Creator:: Howell, Daniel A.
Abstract:: Many conventionally reinforced concrete deck girder bridges (RCDG) and their intermediate supporting bent caps were designed during the Eisenhower interstate era of the 1950’s with the AASHO design equations at the time, which subsequently place higher demand on the concrete. The referenced components may exhibit diagonal cracking due to the...
Resource Type:: Dissertation
Full Text:: Methods for Conventionally Reinforced Concrete Girders and Deep Beams. Abstract approved

Analysis of diagonally cracked conventionally reinforced concrete girders in the service load range

Creator:: Robelo, Melissa J.
Abstract:: Performance evaluation of conventionally reinforced concrete (CRC) bridge superstructure elements with diagonal cracks is of interest to the bridge engineering community. Standardized methods to predict service-level stress magnitudes in cracked bridge girders under combined bending and shear forces are not available. An analysis procedure was developed to determine the response...
Resource Type:: Masters Thesis
Full Text:: were derived from panel testing of large-sized reinforced concrete elements loaded in various

Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details

Creator:: Senturk, Ahmet Ekin
Abstract:: Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the 1950s, throughout the expansion of the Interstate System. Designs followed the AASHO standard of the time, which permitted higher shear stress in concrete and reduced detailing requirements than permitted by current specifications. Many of these...
Resource Type:: Dissertation
Full Text:: Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the

Application of Titanium Alloy Bars for Strengthening Reinforced Concrete Bridge Girders in Flexure

Creator:: Vavra, Eric
Abstract:: Structurally efficient and cost-effective solutions are needed to extend the service-life of deficient and aging highway infrastructure around the world. One critical need is to increase the flexural strength of older reinforced concrete (RC) structures to carry heavier and more frequent loads. Titanium alloy bars (TiAB) offer a new opportunity...
Resource Type:: Masters Thesis
Full Text:: : Application of Titanium Alloy Bars for Strengthening Reinforced Concrete Bridge Girders in Flexure

Shear strengthening reinforced concrete bridge girders using near-surface mounted titanium alloy bars

Creator:: Knudtsen, Jonathan
Abstract:: Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...
Resource Type:: Masters Thesis
Full Text:: Strengthening Reinforced Concrete Bridge Girders Using Near-Surface Mounted Titanium Alloy Bars

Investigation of the fatigue behavior of diagonally-cracked CRC deck-girders repaired with CFRP

Creator:: Williams, Grahme T.
Abstract:: Fiber reinforced polymers (FRP) are becoming more widely used for repair and strengthening of conventionally reinforced concrete (CRC) bridge members. Once installed, the repair may be exposed to millions of load cycles during service life. The anticipated life of FRP repairs for shear strengthening of bridge members under repeated service...
Resource Type:: Masters Thesis
Full Text:: becoming more widely used for repair and strengthening of conventionally reinforced concrete (CRC) bridge

Flexural steel anchorage performance at diagonal crack locations

Creator:: Triska, Mary Ann
Abstract:: Large numbers of reinforced concrete deck girder bridges that were constructed during the interstate system expansion of the 1950s have developed diagonal cracking in the stems. Compared to the present AASHTO-LRFD standards, the provisions of the 1950s allowed for higher shear stress in the concrete, thus reducing the amount of...
Resource Type:: Masters Thesis
Full Text:: Large numbers of reinforced concrete deck girder bridges that were constructed during the interstate

Laboratory performance of highway bridge girder anchorages under hurricane induced wave loading

Creator:: Lehrman, Jora
Abstract:: Many bridges along the Gulf Coast of the United States were damaged by recent hurricanes, and many more are susceptible to similar damage. This research examines performance of common anchorage connection details for AASHTO Type III prestressed concrete girders used by some transportation agencies. Full-scale specimens were fabricated and tested...
Resource Type:: Masters Thesis
Full Text:: anchorage connection details for AASHTO Type III prestressed concrete girders used by some transportation

ScholarsArchive@OSU

Shear capacity assessment of corrosion-damaged reinforced concrete beams

Freeze-thaw durability of reinforced concrete deck girders strengthened for shear with surface-bonded carbon fiber-reinforced polymer

Shear repair methods for conventionally reinforced concrete girders and deep beams

Analysis of diagonally cracked conventionally reinforced concrete girders in the service load range

Experimental and analytical evaluation of conventionally reinforced deck-girder bridge bent caps with vintage details

Application of Titanium Alloy Bars for Strengthening Reinforced Concrete Bridge Girders in Flexure

Shear strengthening reinforced concrete bridge girders using near-surface mounted titanium alloy bars

Investigation of the fatigue behavior of diagonally-cracked CRC deck-girders repaired with CFRP

Flexural steel anchorage performance at diagonal crack locations

Laboratory performance of highway bridge girder anchorages under hurricane induced wave loading

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search