Search Constraints

Start Over
Filtering by: Alternative title ssim PacifiCorp Power-line right-of-way #2 Remove constraint Alternative title ssim: PacifiCorp Power-line right-of-way #2 Contributor advisor sim Wager, John F. Remove constraint Contributor advisor sim: Wager, John F.

Search Results

  • Active matrix electroluminescent device power considerations

    Creator:
    Beck, Douglas
    Abstract:
    An active-matrix electroluminescent (AMEL) design tool has been developed for the simulation of AMEL display devices. The AMEL design tool is a software package that simulates AMEL device operation using a lumped parameter circuit model. The lumped parameter circuit model is developed primarily to address AMEL power dissipation issues. The...
    Resource Type:
    Masters Thesis
    Full Text:
    COMPARISON. 68 LIST OF TABLES PageFigure 33 2 AMEL SIMULATION AND EXPERIMENTAL COMPARISON 37 3

  • Development of high efficiency solar absorbers

    Creator:
    Ravichandran, Ram
    Abstract:
    Current cadmium telluride and copper indium gallium diselenide thin-film solar cells (TFSCs) utilize thick absorbers (2 - 4 μm). For efficient carrier extraction in these TFSCs, the absorber layer requires high carrier mobilities and a long minority carrier lifetime, which necessitates the use of a high purity, defect-free thin film....
    Resource Type:
    Dissertation
    Full Text:
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 LIST OF FIGURES Figure Page 2.1 The spectral power density of sunlight outside the atmosphere

  • Oxide phosphors deposited by activated reactive evaporation for ACTFEL device applications

    Creator:
    Yokoyama, Tomoe
    Abstract:
    The goal of this thesis study is to develop an activated reactive evaporation (ARE) system and to demonstrate its utility by fabricating-alternating current thin-film electroluminescent (ACTFEL) oxide phosphor devices. ARE entails evaporation in an activated gas. The main ARE system components are three thermal evaporation sources, a microwave power supply,...
    Resource Type:
    Masters Thesis
    Full Text:
    2 minutes; (e) a standard power diffraction pattern of/3-Ga203; and (f) a standard power diffrac

  • Low-cost deposition methods for transparent thin-film transistors

    Creator:
    Norris, Benjamin J.
    Abstract:
    The objective of this dissertation is to introduce low-cost processing methods for the fabrication of ZnO transparent thin-film transistors (TTFTs). A novel method for depositing ZnO body layers via spin-coating of a zinc nitrate-based spin solution is presented. The processing conditions of spin-coated ZnO are optimized to produce continuous and...
    Resource Type:
    Dissertation
    Full Text:
    relevant dimensions of mask #1 and mask #2 shown for W/L = 2/1 and W/L = 8/1. Mask #1, the mask for the

  • Assessment of High Mobility Oxide Thin-Film Transistors

    Creator:
    Stewart, Kevin A.
    Abstract:
    The trend towards higher resolution, faster refresh rate active-matrix liquid-crystal displays (AMLCDs) as well as the emergence of active-matrix organic light-emitting diode (AMOLED) displays is driving the demand for amorphous oxide semiconductor thin-film transistors (AOS TFTs) with higher mobility. A physics-based model for carrier transport in an amorphous semiconductor is...
    Resource Type:
    Dissertation
    Full Text:
    funded by Corning Incorporated. TABLE OF CONTENTS Page 1 INTRODUCTION 1 2 BACKGROUND AND LITERATURE

  • Amorphous metal thin films as a platform for solution processing

    Creator:
    Landau, Nicholas P.
    Abstract:
    The research presented herein represents an effort to combine the ultra-smooth surface of an amorphous metal thin film (AMTF) with a solution-processed dielectric synthesized via prompt inorganic condensation (PIC). Analysis of dielectric film quality is carried out via electrical measurements of metal-insulator-metal (MIM) diodes. Anneals at 500 and 700 °C...
    Resource Type:
    Masters Thesis
    Full Text:
    /cm2 measured at 1 MV/cm. This is attributed to a lack of pinhole formation. Power-law fitting of

  • Transparent electronics : thin-film transistors and integrated circuits

    Creator:
    Presley, Rick E.
    Abstract:
    This thesis focuses on two aspects of transparent electronics, SnO₂ transparent thin-film transistors (TTFTs) and transparent circuits. Both depletion- and enhancement-mode SnO₂ TTFTs are realized. The maximum effective mobility for the depletion- and enhancement-mode devices are 2 cm²V⁻¹s⁻¹ and 0.8 cm²V⁻¹s⁻¹, respectively. A variety of techniques to decrease the carrier...
    Resource Type:
    Masters Thesis
    Full Text:
    of ∼2 V. A five-stage ring oscillator circuit (which does not employ level-shifting) is fabricated

  • Diamond-like carbon films for electroluminescent applications

    Creator:
    Kim, Seung-bae
    Abstract:
    White electroluminescence (EL) was observed for the first time from diamond-like carbon (DLC) films at room temperature. Electroluminescence was observed by the application of ac voltages in excess of 200 V to a metal-insulator- semiconductor (i.e. DLC)-insulator-metal (MISIM) device structure. For EL applications, three types of the DLC films were...
    Resource Type:
    Masters Thesis
    Full Text:
    operating modes 2 In spite of its bulkiness and high power dissipation, the CRT has almost exclusively

  • Design, fabrication, and testing of inhomogeneous dielectrics

    Creator:
    Lim, Sungkyoo
    Abstract:
    In this thesis the concept of inhomogeneous dielectrics is demonstrated for various optical coating applications. Compositionally-varying silicon oxynitride (SiON) dielectric layers, with the refractive index varying as a function of position, are grown by computer-controlled plasma-enhanced chemical vapor deposition (PECVD) using silane, nitrogen, and nitrous oxide reactant gases. Compositionally graded...
    Resource Type:
    Dissertation
    Full Text:
    Goldstar is greatly appreciated. TABLE OF CONTENTS CHAPTER 1 INTRODUCTION 1 CHAPTER 2 LITERATURE

  • Characterization of organic light-emitting devices

    Creator:
    Norris, Benjamin J.
    Abstract:
    In this thesis steady-state (i.e. steady-state with respect to the applied voltage waveform) transient current-transient voltage [i(t)-v(t)], transient brightness-transient current [b(t)-i(t)], transient brightness-transient voltage [b(t)-v(t)], transient current [i(t)], transient brightness [b(t)], and detrapped charge analysis are introduced as novel organic light emitting device (OLED) characterization methods. These analysis methods involve...
    Resource Type:
    Masters Thesis
    Full Text:
    2 Literature Review of Organic Light-Emitting Devices 2.1 Device Structure ...... . 2.1.1