Search Constraints

Start Over
Filtering by: Subject Thin film devices -- Design and construction Remove constraint Subject: Thin film devices -- Design and construction Committee Member Chang, Chih-hung Remove constraint Committee Member: Chang, Chih-hung

Search Results

  • Fabrication and application of polymer based microfluidic devices

    Creator:
    Koesdjojo, Myra T.
    Abstract:
    The concept of reducing laboratory operations in scale such that they fit on a microfluidic chip has been met with great enthusiasm. Lab-on-a-chip devices promise to be cost effective to operate due to reduced reagent consumption, have the potential to offer shorter analysis times due to their short path lengths,...
    Resource Type:
    Dissertation
    Full Text:
    using solvent welding………….84 1 Design and Fabrication of Polymer-Based

  • Modeling and development of fabrication method for embedding membrane based microvalve in bulk microfluidic device

    Creator:
    Abhinkar, Bindiya S.
    Abstract:
    PDMS membrane-based microvalves are becoming increasingly more important for the control of fluid flow within MECS applications such as microreactors used to synthesize nanoparticles and biological macromolecules. The motivation for pursuing PDMS membrane-based microvalves is for implementing a plug flow microreactor to simulate slug flow yielding a narrower residence time...
    Resource Type:
    Masters Thesis
    Full Text:
    to one atmosphere. This research work describes the design, analysis, fabrication, and

  • Micro total analysis system for in-situ and autonomous spectrophotometric monitoring of iron in groundwater

    Creator:
    Koch, Corey R.
    Abstract:
    We have developed a compact micro total analysis system (μTAS) to serve as a platform for in-situ spectrophotometric water quality monitoring. Individual fluidic, optical, and electrical components were designed, developed, and characterized. These components were combined in both an integrated (single lithographic “chip-based” platform) and a modular manner. The microfluidic...
    Resource Type:
    Dissertation
    Full Text:
    well, designed both for environmental sampling and device deployment, was installed in a seasonally

  • Development of a microchannel device for adsorption cooling application

    Creator:
    Asumpinpong, Kasidid
    Abstract:
    Single-layer and three-layer microchannel adsorption devices were fabricated by procedure that was newly developed. Aluminum was chosen for metal housing while the adsorption pair was silica gel and water. Each adsorption layer contained two layers of 250 μm-thick silica gel. Both silica gel layers opened to the same layer of...
    Resource Type:
    Masters Thesis
    Full Text:
    adsorption device. Since the adhesive thin film is placed between the silica gel TLC plate and the