Radiation is part of our life. Most people may know a radioactive source is very dangerous. But there are very few situations people are exposed to uncontrolled radionuclides above background. A radioactive source can emit gamma rays which are the highest energy type in electromagnetic radiation.[2] Gamma rays are like...
There are five main contributions of this dissertation. The first contribution is new closed-form expressions for channel capacity of a new class of channel matrices. The second contribution is the discovery of the structure for optimal binary quantizer and the associated methods for finding an optimal quantizer that maximizes mutual...
Spectrum overcrowding, ever increasing demand for high data rate and increased mobility requirements are three major challenges 5G-technology is trying to address. In this thesis I start with a RF front-end technique that deals with blocker interference arising from spectrum overcrowding both across frequency bands and within the same frequency...
IoT networks can be viewed as collections of Internet-enabled physical devices and objects, embedded with sensor, actuator, computation, storage and communication components, that are capable of connecting and exchanging data to one another. In recent years, organizations have allowed more and more IoT devices to be connected to their networks,...
The ubiquity of high quality video and proliferation of mobile devices has contributed to an unprecedented rise in video consumption. HTTP, in conjunction with adaptive streaming, has become the de facto mechanism for delivering the vast majority of video as it readily caters to heterogeneous networks and devices. This dissertation...
This work demonstrates correlation of microwave signals encoded with 16-bit codes using the parametric interaction of spin waves. Signal processing correlators are devices that compare two signals, such as a reference code and a received code, where the output indicates the similarity between the signals. Correlators are used in communication...
Filters and data converters are key analog-and-mixed-signal (AMS) building blocks in communication systems, such as software-defined radios and internet-of-things. In this dissertation, novel switched-capacitor filter and analog-to-digital converter (ADC) circuit configurations have been explored which are power efficient and are digital scaling friendly.
First, a novel switched-capacitor low-pass filter architecture...
Analog-to-digital converters are essential components to the portable devices that we are using today. Wireless sensors, body implanted devices, communication devices and so forth require low power ADCs. Therefore achieving higher resolution and bandwidth with lower power consumption is targeted in ADCs design. In this work power efficient ADCs for...
The Comprehensive Nuclear-Test-Ban Treaty (CTBT) bans all nuclear explosion tests for military or civilian purposes. The International Monitoring System (IMS) was established to verify compliance with the treaty. It consists of several monitoring stations that detect: seismic activities, hydrocoustic activities, infrasound waves, and radionuclide particles and noble gases. Radioxenon detection...
Triangulateration uses geometric distance to estimate the location of user by employing techniques like received signal strength (RSS), time-of-arrival (TOA), time-difference-of-arrival (TDOA) and image processing.
Radio frequency (RF) signal positioning using TOA or TDOA techniques generally requires timing synchronization of the anchors and/or the anchors and targets. If the desired...
Recent sensor System-on-Chips (SoC) have enabled significant advances in energy-efficiency by incorporating various micro-powered building blocks. Unfortunately, most of these sensor systems do not address the high power cost associated with data storage and transmission, which in some cases vastly exceeds the power consumed by the rest of the SoC....
This dissertation focuses on the development of ultra-compact optical devices for free-space modulation. We propose a surface-normal modulator using metallic photonic crystals for free-space optical interconnects. The active control of light intensity is achieved by engineering the Fano resonances in metallic photonic crystals. Both thermo-optic modulation and electro-optic modulation of...
In wireless communication, channel state information (CSI) is essential for data detection. Fast fading coefficients estimation is important in order to acquire accurate CSI. Kalman filters (KF) are widely used for real time parameter estimation and can be used to estimate the fast fading coefficients of a mobile communication channel....
Massive MIMO is a promising technique for future 5G communications due to its high spectrum and energy efficiency. To realize its potential performance gain, accurate channel state information at transmitter side (CSIT) is essential. Frequency division duplex (FDD) is widely employed by the most cellular systems today. However, it requires...
Detection of xenon radioisotopes (radioxenons) has proven to be an important method for detecting nuclear explosions and is particularly well suited for detecting undeclared underground testing. The radioxenon isotopes ¹³¹mXe (t₁/₂ = 11.934 d), ¹³³mXe (t₁/₂ = 2.19 d), ¹³³Xe (t₁/₂ = 5.243 d) and ¹³⁵Xe (t₁/₂ = 9.14 h)...
The design of mobile wireless devices has always focused on reducing power, area, and cost. This dissertation proposes two techniques that are leveraged to save power and area and therefore cost. The first techniques reduces the noise in the receiver and results in a relaxed power requirement. The second technique...
All-digital PLLs promise flexible and precise frequency modulation continous-wave(FMCW) radar signal signal for 77GHz radar applications. Such PLLs require digitally-controlled oscillators(DCO) with wide frequency tuning range and high resolution to address a range of applications and low phase noise requirements. In this thesis, novel resonator structures with ne capacitance/inductance switching...
The ability to accurately locate people and objects indoors will enable opportunities for control and automation of indoor environments. Current indoor localization solutions require dedicated hardware which must be custom tailored to each application. There are large technological, societal, and economic benefits in developing a more general purpose system that...
The complexity of designing and testing today's system on chip (SOC) is increasing due to greater integrated circuit (IC) density and higher IO and memory frequencies. SOCs for the mobile phone and tablet market have the unique challenge of short product development windows, at times less than six months, and...
Wireless High Definition Video Transmission (WHDVT) over 802.11-based networks enjoys widespread deployment among today's multimedia solutions. Examples include Intel® Wireless Display and Apple Airplay®, to name a few. In these systems, peer-to-peer networks are established over which H.264-encoded video is transported wirelessly to be decoded and played back at the...