Radiation is part of our life. Most people may know a radioactive source is very dangerous. But there are very few situations people are exposed to uncontrolled radionuclides above background. A radioactive source can emit gamma rays which are the highest energy type in electromagnetic radiation.[2] Gamma rays are like...
There are five main contributions of this dissertation. The first contribution is new closed-form expressions for channel capacity of a new class of channel matrices. The second contribution is the discovery of the structure for optimal binary quantizer and the associated methods for finding an optimal quantizer that maximizes mutual...
Spectrum overcrowding, ever increasing demand for high data rate and increased mobility requirements are three major challenges 5G-technology is trying to address. In this thesis I start with a RF front-end technique that deals with blocker interference arising from spectrum overcrowding both across frequency bands and within the same frequency...
IoT networks can be viewed as collections of Internet-enabled physical devices and objects, embedded with sensor, actuator, computation, storage and communication components, that are capable of connecting and exchanging data to one another. In recent years, organizations have allowed more and more IoT devices to be connected to their networks,...
The ubiquity of high quality video and proliferation of mobile devices has contributed to an unprecedented rise in video consumption. HTTP, in conjunction with adaptive streaming, has become the de facto mechanism for delivering the vast majority of video as it readily caters to heterogeneous networks and devices. This dissertation...
This work demonstrates correlation of microwave signals encoded with 16-bit codes using the parametric interaction of spin waves. Signal processing correlators are devices that compare two signals, such as a reference code and a received code, where the output indicates the similarity between the signals. Correlators are used in communication...
Filters and data converters are key analog-and-mixed-signal (AMS) building blocks in communication systems, such as software-defined radios and internet-of-things. In this dissertation, novel switched-capacitor filter and analog-to-digital converter (ADC) circuit configurations have been explored which are power efficient and are digital scaling friendly.
First, a novel switched-capacitor low-pass filter architecture...
Analog-to-digital converters are essential components to the portable devices that we are using today. Wireless sensors, body implanted devices, communication devices and so forth require low power ADCs. Therefore achieving higher resolution and bandwidth with lower power consumption is targeted in ADCs design. In this work power efficient ADCs for...
The Comprehensive Nuclear-Test-Ban Treaty (CTBT) bans all nuclear explosion tests for military or civilian purposes. The International Monitoring System (IMS) was established to verify compliance with the treaty. It consists of several monitoring stations that detect: seismic activities, hydrocoustic activities, infrasound waves, and radionuclide particles and noble gases. Radioxenon detection...
Triangulateration uses geometric distance to estimate the location of user by employing techniques like received signal strength (RSS), time-of-arrival (TOA), time-difference-of-arrival (TDOA) and image processing.
Radio frequency (RF) signal positioning using TOA or TDOA techniques generally requires timing synchronization of the anchors and/or the anchors and targets. If the desired...
Recent sensor System-on-Chips (SoC) have enabled significant advances in energy-efficiency by incorporating various micro-powered building blocks. Unfortunately, most of these sensor systems do not address the high power cost associated with data storage and transmission, which in some cases vastly exceeds the power consumed by the rest of the SoC....
This dissertation focuses on the development of ultra-compact optical devices for free-space modulation. We propose a surface-normal modulator using metallic photonic crystals for free-space optical interconnects. The active control of light intensity is achieved by engineering the Fano resonances in metallic photonic crystals. Both thermo-optic modulation and electro-optic modulation of...
In wireless communication, channel state information (CSI) is essential for data detection. Fast fading coefficients estimation is important in order to acquire accurate CSI. Kalman filters (KF) are widely used for real time parameter estimation and can be used to estimate the fast fading coefficients of a mobile communication channel....
Massive MIMO is a promising technique for future 5G communications due to its high spectrum and energy efficiency. To realize its potential performance gain, accurate channel state information at transmitter side (CSIT) is essential. Frequency division duplex (FDD) is widely employed by the most cellular systems today. However, it requires...
Detection of xenon radioisotopes (radioxenons) has proven to be an important method for detecting nuclear explosions and is particularly well suited for detecting undeclared underground testing. The radioxenon isotopes ¹³¹mXe (t₁/₂ = 11.934 d), ¹³³mXe (t₁/₂ = 2.19 d), ¹³³Xe (t₁/₂ = 5.243 d) and ¹³⁵Xe (t₁/₂ = 9.14 h)...
The design of mobile wireless devices has always focused on reducing power, area, and cost. This dissertation proposes two techniques that are leveraged to save power and area and therefore cost. The first techniques reduces the noise in the receiver and results in a relaxed power requirement. The second technique...
All-digital PLLs promise flexible and precise frequency modulation continous-wave(FMCW) radar signal signal for 77GHz radar applications. Such PLLs require digitally-controlled oscillators(DCO) with wide frequency tuning range and high resolution to address a range of applications and low phase noise requirements. In this thesis, novel resonator structures with ne capacitance/inductance switching...
The ability to accurately locate people and objects indoors will enable opportunities for control and automation of indoor environments. Current indoor localization solutions require dedicated hardware which must be custom tailored to each application. There are large technological, societal, and economic benefits in developing a more general purpose system that...
The complexity of designing and testing today's system on chip (SOC) is increasing due to greater integrated circuit (IC) density and higher IO and memory frequencies. SOCs for the mobile phone and tablet market have the unique challenge of short product development windows, at times less than six months, and...
Wireless High Definition Video Transmission (WHDVT) over 802.11-based networks enjoys widespread deployment among today's multimedia solutions. Examples include Intel® Wireless Display and Apple Airplay®, to name a few. In these systems, peer-to-peer networks are established over which H.264-encoded video is transported wirelessly to be decoded and played back at the...
Data converters are essential interface circuits between the analog world that people live in and the digital processors that people live with. Linearity, which often is a tradeoff against other performance criteria, is one of the major performance demands from applications for both analog-to-digital converts (ADC) and digital-to-analog converters (DAC)....
A procedure for automating the design and layout of analog-to-digital converters (ADCs) is presented. This procedure makes use of the existing synthesis and place-and-route tools that are common in digital circuit design. A method for adding rudimentary analog cells to the standard library is described, allowing the designer to synthesize...
Recent publications show that successive approximation register (SAR) analog to digital converters (ADC) are capable of achieving high efficiency over other ADC topologies. Furthermore, techniques have been adopted to process signals with low activity periods, such as biomedical and industrial sensors. Prior work used least- significant bit first quantization (LSBFQ)...
Routing from a single source node to multiple destination nodes using node disjoint paths (NDP) has many important applications in parallel systems. For example, if a source node wants to send distinct messages to distinct destination nodes, then the one-to-many NDP routing is useful.
Unlike parallel systems with shared-memory, each...
The Focused Ion Beam (FIB) tool is a versatile instrument for nano-machining in
circuit editing. Circuit editing is one of the most important steps in the design of an
electronic circuit on a chip. Circuit editing can be improved by imaging of silicon
plates and analyzing the resultant images. However...
Radioxenon detection is a technique used to monitor nuclear explosion and verify the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Because of an ultra-low concentration of radioxenon at radioxenon monitoring stations, radioxenon detection systems must have high sensitivity. This sensitivity is measured in terms of detector's minimum detectable concentration (MDC). It is required...
For the past half century, CMOS process scaling has followed Moore's law, approximately doubling transistor density every 18 months. While locally routed wires have generally scaled with transistor size, longer wires have scaled at a slower rate and in some cases have grown larger as chip size and complexity have...
Ultra-high-speed (>10GS/s), medium-resolution (5~6bit), low-power (<50mW) analog-to-digital converter can find it application in the areas of digital oscilloscopes and next-generation serial link receivers. There are several challenges to enable a successful design, however. First, the time-interleaved architecture is required in order to achieve over 10GS/s sampling rate, with the trade-off...
High Definition video streaming over WLANs faces many challenges because video data requires not only data integrity but also frames have strict playout deadline. Traditional streaming methods that rely solely on either UDP or TCP have difficulties meeting both requirements because UDP incurs packet loss while TCP incurs delay. This...
Traditionally, networking protocol designs have placed much emphasis on point-to-point reliability and efficiency. With the recent rise of mobile and multimedia applications, other considerations such as power consumption and/or Quality of Service (QoS) are becoming increasingly important factors in designing network protocols. As such, we present a new flexible framework...
Frequency synthesizers are critical components of all communication systems. This thesis considers the issue of undesirable frequency spurs of a relatively recent type of frequency synthesis architecture called digital-to-time conversion (DTC). The DTC-based frequency synthesis architecture has important performance benefits over older frequency synthesizers, such as fast frequency switching, large...
We develop efficient coordination techniques that support inelastic traffic in large-scale distributed dynamic spectrum access DSA networks. By means of any learning algorithm, the proposed techniques enable DSA users to locate and exploit spectrum opportunities effectively, thereby increasing their achieved throughput (or "rewards" to be more general). Basically, learning algorithms...
The proliferation of body worn autometric devices has been enabled by advances in low-power electronics and fueled by the quantified-self movement. These devices range in complexity from pedometers to clinical vital sign measurement. They all share the same drawback, typically the most expensive and heaviest component, the battery. The future...
Phase Locked Loops(PLLs) are an integral part of almost every electronic system. Systems involving low frequency clocks often require PLLs with low bandwidth. The area occupied by the large loop filter capacitor and resistor in a low bandwidth PLL design makes the realization of traditional charge-pump PLL architecture impractical on...
In an industrial and consumer electronic marketplace that is increasingly demanding greater real-world interactivity in portable and distributed devices, analog to digital converter efficiency and performance is being carefully examined. The successive approximation (SAR) analog to digital converter (ADC) architecture has become popular for its high efficiency at mid-speed and...
The increased use of mobile wireless devices that we have recently been witnessing, such as smartphones, tablets, e-readers, and WiFi enabled devices in general, is driving an unprecedented increase in the amount of data traffic. This fast market adoption of the wireless technology along with the tremendous success of multimedia...
The dependence of the substrate resistance, R[subscript sub], for MOS transistor RF modeling on transistor biasing and layout is studied from device simulations and measurements. Though R[subscript sub] is found to be bias dependent, the error incurred by assuming a constant value equal to the DC resistance is not significant....
Advancements in power electronics to higher power levels and faster switching times allow new machine and systems designs, but also create higher stresses on electric machinery insulation. High performance, pulse-width modulated (PWM) inverters are now available for medium voltage drive systems, and are being considered by the U.S. Navy as...
The electrical behavior of on-chip interconnects has become a dominant factor in silicon-based high speed, RF, and mixed-signal integrated circuits. In particular, the frequency-dependent loss mechanisms in heavily-doped silicon substrates can have a large influence on the transmission characteristics of on-chip interconnects. To optimize the performance of the integrated circuit,...
This thesis proposes a novel fully digital technique for the estimation and correction of the DAC error in multi-bit delta sigma ADCs. The structure of the DAC error is indicated through a simple model for unit-element based DACs. The impact of the DAC error on the performance of ADC is...
Mobile devices are becoming more prevalent and complex. As a result, the wireless communication aspect of these devices is becoming increasingly significant. At the same time, video demands in terms of availability and quality are also on the uprise. High definition (HD) video is the standard of choice for meeting...
Complex digital circuits such as microprocessors typically require support circuitry that has traditionally been realized using analog or mixed-signal macros. PLL circuits are used in many integrated applications such as frequency synthesizers and inter-chip communication interfaces. As process technologies advance and grow in complexity, the challenge of maintaining required analog...
In this thesis, a novel Direct-Charge-Transfer (DCT) integrator structure is proposed, which can settle much faster than regular switch-capacitor integrators. A new Spread-Spectrum Dynamic Element Matching (SS-DEM) algorithm is also introduced, which can effectively spread or shape the nonlinearity error of multi-bit DAC in the feedback path, thus improve the...
Estimating the carrier frequency from a modulated waveform is one of the most important functions of a coherent signal receiver. Good performance and low bit error rates are obtained by coherent demodulation. Therefore, exact knowledge of the received signal carrier frequency is critical for communication systems. Also due to the...
Multi-stage delta-sigma (ΔΣ) architectures, commonly known as MASH, are the preferred choice for analog-to-digital converters (ADCs) used in broadband communication applications, where high-resolution (above 14 bits) and high-bandwidth (several MHz) performances are required. Current state-of-the-art designs are capable of as much as 5-MS/s output data rates with 90-dB SNR. However,...
This dissertation presents a low-power high-resolution delta-sigma ADC. Two new architectural design techniques are proposed to reduce the power dissipation of the ADC. Compared to the conventional active adder, the direct charge transfer (DCT) adder greatly saves power by keeping the feedback factor of the active adder unity. However, the...
The meteoric rise and prevalent usage of wireless networking technologies for mobile
communication applications have captured the attention of media and imagination of
public in the recent decade. One such proliferation is experienced in Wireless Sensor
Networks (WSNs), where multimedia enabled elements are fused with integrated
sensors to empower tightly...
In some practical systems, most of the errors are of 1 → 0 type and 0 → 1
errors occur very rarely. In this thesis, first, the capacity of the asymmetric
channel is derived. The capacity of the binary symmetric channel (BSC) and the
Z-channel can be derived from this...
The stupendous growth in wireless and mobile devices in the recent years has prompted researchers to look at innovative approaches that enable effective use of the available resources. In this thesis, we propose a medium access control (MAC) protocol, referred to as EM-MAC, that enables wireless devices with multi-channel access...
This dissertation investigates the use of a hardware mechanism called Eager Data Transfer (EDT) for achieving the reduction of communication latency for user-level network protocol. To reach the goal, the dissertation addresses the following research issues. First, the development of a communication system performance evaluation tool called Linux/SimOS is presented....