Index Catalog // ScholarsArchive@OSU

A CFD Analysis of a Single Channel in the Mars Hopper Engine

Creator:: Koll, Christopher J.
Abstract:: The Mars Hopper is an alternative extraterrestrial vehicle for the collection of samples from the Martian surface. This thesis studied the engine of the Mars Hopper to assess the validity of the current planned launch cycle according to current parameters. To do this, the engine was simplified to an average...
Resource Type:: Masters Thesis

A multiagent approach to identifying innovation in design components

Creator:: Rebhuhn, Carrie M.
Abstract:: Innovation is a key element for a product to achieve market success, but identifying it within product or even defining the term is a difficult task. Identifying innovation has been approached in many different ways. Experts in design engineering may identify innovative designs based on an analysis of a product's...
Resource Type:: Masters Thesis

A novel framework for uncertainty propagation in river systems based on performance graphs using two-dimensional hydrodynamic modeling

Creator:: Gifford-Miears, Christopher H.
Abstract:: This thesis presents a novel approach for propagation of uncertainty in river systems. Errors in data observations and predictions (e.g., stream inflows), in model parameters, and resulting from the discretization of continuous systems, all point to the need to accurately quantify the amount of uncertainty carried through the modeling process....
Resource Type:: Masters Thesis

A Permanent-Magnet Linear Generator Wave Energy Converter for Low Power Ocean Sensors

Creator:: Miles, Lillian F.
Abstract:: Renewable energy sources are becoming increasingly important due to their low environmental impact and limitless nature. This thesis explores the design of a 250 mW permanent magnet linear generator wave energy converter to power ocean sensors. While many wave energy converters exist, this is a unique application because the wave...
Resource Type:: Masters Thesis

A quantitative comparison of cardiovascular imaging systems with respect to the resolution capabilities and the resulting skin entrance doses operating in both fluoroscopic and cine mode

Creator:: Helms, W. Scott
Abstract:: The increasing use of medical procedures using ionizing radiation has increased significantly in recent years. In 1987, the National Council on Radiation Protection Report 93 (NCRP) reported that the average exposure ionizing radiation was 53mRem/year (0.53mSv/year). In their most recent study on radiation exposures NCRP Report 160 in 2009, the...
Resource Type:: Masters Thesis

A Text-based Simulation Framework for the Automated Simulation and Analysis of Manufacturing Assembly Systems

Creator:: Fields, Benjamin G.
Abstract:: The rapid advancement of manufacturing has led to the creation of a myriad of technologies that facilitate the analysis and simulation of manufacturing processes. These technologies have become a pivotal component in maintaining and improving processes in today’s complex manufacturing environments. Discrete Event Simulation (DES) is one such technology that...
Resource Type:: Masters Thesis

Advanced Deterministic Phonon Transport Techniques for Predicting Spectral Thermal Conductivity in Homogeneous and Heterogeneous Media

Creator:: Harter, Jackson R.
Abstract:: We present a deterministic spectral method to predict equilibrium temperature distributions, heat flux, and thermal conductivity in homogeneous and heterogeneous media. We solve the Boltzmann transport equation in a second order spatial, self-adjoint angular flux formulation. We implemented this method into the radiation transport code Rattlesnake, built using the MOOSE...
Resource Type:: Dissertation

Advancing the understanding of bulk metallic glasses as structural materials through exploration of mechanical properties

Creator:: Naleway, Steven E.
Abstract:: Bulk metallic glasses (BMGs) offer a great deal of potential through their near-theoretical strength, potentially high toughness and unique forming and molding traits. However, there are still a number of outstanding issues that bar their widespread use. This thesis describes the investigation of three research questions each designed to further...
Resource Type:: Masters Thesis

Bi-level flexible-robust optimization for energy allocation problems

Creator:: Biswas, Arpan
Abstract:: A common problem in energy allocation problems is managing the trade-off between selling surplus energy to maximize short term revenue, versus holding surplus energy to hedge against future shortfalls. For energy allocation problems, this surplus represents resource flexibility and is quantified as the surplus energy after meeting the demand. The...
Resource Type:: Masters Thesis

CFD simulation of single-phase and flow boiling in confined jet impingement with in-situ vapor extraction using two kinds of multiphase models

Creator:: He, Xiaoliang
Abstract:: With continued development of the electronic industry, the demand for highly efficient heat removal solutions requires innovative cooling technologies. A computational fluid dynamic (CFD) study, including heat transfer, is performed for an axisymmetric, confined jet impingement experiencing boiling and coupled with vapor extraction. Boiling occurs at the target surface while...
Resource Type:: Masters Thesis

Characterization of reinforced fill soil, soil-reinforcement interaction, and internal stability of very tall MSE walls

Creator:: Walters, James J.
Abstract:: In many geotechnical design situations involving tight right-of-way constraints, Mechanically Stabilized Earth (MSE) walls are often the most cost-effective and reliable earth retention technology among available alternatives. However, few well-documented case histories with detailed material testing, instrumentation programs and construction observation of performance are available in the literature. Despite the...
Resource Type:: Masters Thesis

Comparative analysis of the Žukauskas method and data from the OSU MASLWR test facility steam generator

Creator:: Wuth, Bradyn J.
Abstract:: Some of the next generation of small modular reactors have been designed with helically coiled steam generators integrated into the reactor vessel to enhance natural circulation. According to the developers of TASS/SMR, a one-dimensional thermal hydraulic code written to model the Korean Atomic Energy Research Institute's SMART reactor, the Žukauskas...
Resource Type:: Masters Thesis

Computational Fluid Dynamics Benchmark Analysis of an Historical Sodium Loop Experiment

Creator:: Moore, Thomas M.
Abstract:: Sodium cooled nuclear reactors are being considered for the next generation of nuclear power plants to provide clean electricity to the world. To prove the safety of these reactors, the fuel must be shown to safely handle large neutron fluxes that cause a spike in the thermal output of the...
Resource Type:: Masters Thesis

Controlling the Co-Precipitation of Colloidal PbSe Quantum Dots and Their Device Performance in a Diode Architecture

Creator:: McCrea, Tyler D.
Abstract:: In this work, colloidal PbSe quantum dots (QDs) are shown to be synthesized in a controlled manner by changing the growth time and reaction temperature in a microwave synthesis method. It is explained why quantum dots make such a unique material to create electronic devices and the specific benefits that...
Resource Type:: Masters Thesis

Cost-Benefit Analysis : Proposed Safety Upgrades to Currently Operating Nuclear Power Plants

Creator:: Jordahl, Jonathan T.
Abstract:: In the wake of nuclear accidents such as Three Mile Island Unit 2 and Fukushima, the nuclear power industry’s safety record is scrutinized. Today the main concerns lies with hydrogen production in a nuclear reactor core when the zirconium fuel cladding reacts with the water coolant during an accident, creating...
Resource Type:: Masters Thesis

Efficiency of a direct contact condenser in the presence of the noncondensable gas air compared to a tube and shell condenser

Creator:: Lebsack, Jonathan M.
Abstract:: Steam distillation is the traditional method used for the extraction of peppermint oil. This process is able to remove approximately 20% of the oils from the leaves of the plant. It is a very costly and un-sustainable process due to the release of carbon emissions. Solvent free microwave extraction promises...
Resource Type:: Masters Thesis

EM-MAC : an energy-aware multi-channel medium access control protocol for multi-hop wireless networks

Creator:: Sivanantha, Akhil
Abstract:: The stupendous growth in wireless and mobile devices in the recent years has prompted researchers to look at innovative approaches that enable effective use of the available resources. In this thesis, we propose a medium access control (MAC) protocol, referred to as EM-MAC, that enables wireless devices with multi-channel access...
Resource Type:: Masters Thesis

Enabling Feasibility Assessment of Solar Thermal Energy Systems for Industrial Process Heating Applications

Creator:: Karki, Saroj
Abstract:: Existing studies on industrial heat demand have shown that more than 50% of the industrial process heat demand is in the range of low (<60 °C), medium (60-150 °C), and medium-high (<250 °C) temperatures. Most of the manufacturing industries across the world depend on combustion of carbon-based fossil fuels, either...
Resource Type:: Masters Thesis

Evaluating Contributing Factors to Collision Types through Discrete Choice Analysis : An Application to Large-Truck Crashes in Washington State

Creator:: Dudich, Dejan
Abstract:: While there have been several efforts to understand large-truck crashes, the relationship between crash factors, crash severity and collision type is not clearly understood. Past studies have utilized different statistical or econometric models to predict the manner of collision at intersections, yet not much attention has been paid to the...
Resource Type:: Masters Thesis

Evaluating the presence of radium-226 in soil surrounding a coal-fired power plant using the multi-agency radiation survey and site investigation manual (MARSSIM)

Creator:: Herring, Thomas A. (Thomas Andrew)
Abstract:: Coal-fired power plants constitute a significant source of energy production for the United States, and are projected to do so for decades to come. Most of the scrutiny coal-fired power plants receive is in the form of environmental concerns regarding green house gas emissions of carbon dioxide, sulfur dioxide, and...
Resource Type:: Masters Thesis

Experimental Investigation of the Transition to Natural Convection in HTGR Applications using the Oregon State SFSETF

Creator:: Fishler, Joshua D.
Abstract:: High Temperature Gas Reactors (HTGRs) are positioned to disrupt local and global markets via their unique ability to produce carbon-free process heat, high efficiency power generation, and passively safe operational features. However, significant impediments still exist to delay deployment of this particular technology, including a lack of experimental data, verified...
Resource Type:: Dissertation

Feasibility study on a soluble boron-free small modular reactor

Creator:: Mart, Justin R.
Abstract:: The elimination of soluble boron creates several advantages for Small Modular Reactor (SMR) operation. Most of these advantages are realized through significant core simplification (removal of pipes, pumping, and purification systems), the removal of the corrosive effects of soluble boron, and from improved safety effects. However, removing soluble boron creates...
Resource Type:: Masters Thesis

Finite Element Modeling Strategies for Seismic Collapse Assessment of Non-planar Slender Reinforced Concrete Structural Wall Resisting Systems

Creator:: Mohammed, Mohammed A.
Abstract:: For mid-rise and high rise buildings, slender reinforced concrete (RC) structural walls are commonly used as the main structural elements to resist lateral applied loads in high seismically areas around the globe. These RC structural walls can provide substantial deformation capacity, stiffness, and lateral strength through the contribution of their...
Resource Type:: Dissertation

Fission Gas Bubble Behavior in Uranium Carbide

Creator:: Matthews, Christopher
Abstract:: The need for cheap reliable energy, while simultaneously avoiding uranium supply constraints makes uranium carbide (UC) fueled Gas Fast Reactors offer an attractive nuclear reactor design. In order to qualify the fuel, an enhanced understanding of the behavior of uranium carbide during operation is paramount. Due to a reduced re-solution...
Resource Type:: Dissertation

Flat Plate Free Convective Heat Transfer

Creator:: Bristol, Benjanmin R.
Abstract:: The OSU MASLWR Test facility is a scaled integral systems LOCA and proof-of-concept test facility for the Multi-Application Small Light Water Reactor design concept. A unique feature of this design is to utilize a small high pressure containment vessel to provide the safety containment function for an integral reactor pressure...
Resource Type:: Masters Thesis

Fracture toughness of void-site-filled skutterudites

Creator:: Eilertsen, James S.
Abstract:: Thermoelectric materials are playing an increasingly significant role in the global effort to develop sustainable energy technologies. Consequently, the demand for materials with greater thermoelectric efficiency has stimulated the development of state-of-the-art interstitially doped skutterudite-based materials. However, since intermetallics are often embrittled by interstitial substitution, optimal skutterudite-based device design, manufacture,...
Resource Type:: Masters Thesis

Gravity-based non-invasive superconducting gravimeter system for reactor coolant inventory monitoring

Creator:: Danielson, Jordan J.
Abstract:: All nuclear reactors rely heavily on the use of level sensing instrumentation to detect the behaviour of liquid in vessels. The majority of level sensing instruments are differential pressure sensing meters, which are invasive and could be the failure source in the pressure boundary of the primary coolant system. In...
Resource Type:: Masters Thesis

Group scheduling in electronics manufacturing with integration of internal and external setup times

Creator:: Yazdani Sabouni, Mohammad Taghi
Abstract:: This research considers a combinatorial optimization scheduling problem in the assembly of printed circuit boards (PCBs) in electronic manufacturing. For the first time in this research, the preparation process, which is typically called kitting operation, is paid attention to and is performed along with the assembly operation, described in this...
Resource Type:: Dissertation

Heat Loss Characterization of NIST-1's Containment Vessel

Creator:: Yoshiura, Ramon K.
Abstract:: NuScale Power has designed a small modular reactor using natural circulation cooling dependent systems for both steady-state and transient operations. The NuScale Integral Test System (NIST-1) facility was built to supply test data to NuScale Power to verify and validate computer codes for the NuScale Power Mod- ule (NPM) with...
Resource Type:: Masters Thesis

High Pressure Condensation in an SMR Containment

Creator:: Mullin, Etienne M.
Abstract:: The Oregon State University Multi-Application Small Light Water Reactor test facility is employed in a series tests to evaluate condensation heat transfer in small, high pressure containment vessels characteristic of small modular reactor designs under development. This integral system test facility was constructed to demonstrate the feasibility of a pioneering...
Resource Type:: Masters Thesis

Improving robotic grasping performance using machine learning techniques

Creator:: Goins, Alex Keith
Abstract:: Robots are being utilized in ever more complex tasks and environments to help humans with difficult or dangerous tasks. However, robotic grasping is still in its infancy and is one of the limiting factors which prevent the deployment of robots in the home and other assisted living scenarios. Traditional methods...
Resource Type:: Masters Thesis

Investigating the Effect of Tetrahydrofuran (THF) Plasticizer on the Crystallization and Solvent Seaming of PET/NPG Copolymer Films

Creator:: Srivastava, Aarushi
Abstract:: Polyethylene terephthalate (PET) polymer has been the material of choice for packaging industry as a result of its excellent mechanical and physical properties. These properties are highly dependent on the microstructure, chemistry, and processing conditions of this material. PET is often oriented in the machine direction (MD), the transverse direction...
Resource Type:: Masters Thesis

Irradiation Capsule Development for Composite Fuels for Nuclear Thermal Propulsion

Creator:: Thody, Austin
Abstract:: Nuclear Thermal Rocket (NTR) designs have received renewed interest due to their superior thermal efficiencies and a rehabilitated desire for space exploration. This has resulted in improved NTR fuel designs that have unique properties that require investigation and testing in order to be more safely designed and operated. Oak Ridge...
Resource Type:: Masters Thesis

Mechanics of three-dimensional microenvironments of cells

Creator:: Jones, Christopher
Abstract:: The structure and mechanics of tissues affect many important cellular functions such as migration, differentiation, and growth. Mechanical interactions between cells and the extracellular matrix (ECM), as well as ECM-mediated mechanical communication between cells, plays a part in coordinating collective cellular dy- namics during critical processes such as morphogenesis, tissue...
Resource Type:: Dissertation

Molybdenum-99 production in the Oregon State TRIGA reactor : analysis of the reactor design using a new LEU target as fuel

Creator:: Hummel, Andrew J.
Abstract:: The most widely used and versatile medical radioisotope today is technetium-99m. Roughly 30 million people depend on this radioisotope for diagnostic procedures each year, and this demand is expected to grow. Although there are numerous ways of procuring this isotope, the most common and most practical, for reasons to be...
Resource Type:: Dissertation

Multi-Objective Optimization in Multiagent Systems

Creator:: Yliniemi, Logan Michael
Abstract:: Cooperative multiagent systems are used as solution concepts in many application domains including air traffic control, satellite communications, and extra planetary exploration. As systems become more distributed and complex, we observe three phenomena. First, these systems cannot be accurately modeled, rendering traditional model based control methods inadequate. Second, system parameters...
Resource Type:: Dissertation

Neutron radiography and tomography : determining and optimizing resolution of neutron sensitive multi channel plate detectors

Creator:: Williams, Walter James
Abstract:: The objective of this work was to determine and optimize the resolution of a neutron sensitive Multi-Channel Plate (MCP) detector in order to determine its capabilities in radiography and tomography. The Oregon State University, Neutron Radiography Facility added an MCP Detector in 2012 in order to analyze these capabilities. The...
Resource Type:: Masters Thesis

New Rating Methods for Pin and Hanger Assemblies in Steel Bridges

Creator:: Montgomery, Jacob R.
Abstract:: Pin and hanger assemblies are a common type of connection used in past engineering practice for steel girder bridges. The connection consists of pins, hanger plates, and girder ends. The connection detail was used widely between 1930 and 1980. The connections are considered fracture critical and nonredundant because connection failure...
Resource Type:: Masters Thesis

Non-Stoichiometry in Bismuth Perovskite Solid Solutions

Creator:: Prasertpalichat, Sasiporn
Abstract:: The role of A-site non-stoichiometry was investigated in lead-free piezoelectric ceramics based on compositions in the 1-x(Bi₀.₅Na₀.₅TiO₃)-xBaTiO₃ system near the morphotropic phase boundary where x = 0.055, 0.06 and 0.07. The samples were prepared by a conventional solid state mixed oxide route with the A- site stoichiometry modified to incorporate...
Resource Type:: Dissertation

On Undular Bores and Solitary Waves in Variable Depth

Creator:: Knowles, Jeffrey N.
Abstract:: Numerical results are presented using a higher-order pseudo-spectral method in order to solve the Zakharov-Craig-Sulem formulation of the Euler model. We study the effects of variable bathymetry on weakly-dispersive, weakly-nonlinear, shallow water waves. Improved predictions on wave amplitude and shoaling behavior are developed by analytical means in the context of...
Resource Type:: Dissertation

Orb Web Vibrations: Modeling, Localization, and Measurement

Creator:: Otto, Andrew W.
Abstract:: The orb web is a multipurpose structure---serving as a home for its inhabitant spider, as a prey capture device, and as a physical extension of the spider’s sensing abilities. Biologists are particularly interested in the spider’s ability to locate prey trapped in its web by sensing the vibrations induced from...
Resource Type:: Dissertation

Organic Phase Inter-Ligand and Metal-Ligand Speciation in TALSPEAK and ALSEP Solvent Extraction Systems

Creator:: Gullekson, Brian J.
Abstract:: Partitioning of trivalent actinides (in particular, americium and curium) from the fission produced light lanthanides is a major concern of used nuclear fuel reprocessing for the purposes of waste disposal. Several solvent extraction processes have been developed to address these chemically difficult separations. The historically employed TALSPEAK Process utilizes di-2-ethylhexyl...
Resource Type:: Dissertation

Predicting Thermal Conductivity in Nuclear Fuels using Rattlesnake-Based Deterministic Phonon Transport Simulations

Creator:: Harter, Jackson R.
Abstract:: The Boltzmann transport equation derived in the Self-Adjoint Angular Flux (SAAF) formulation is applied to simulate phonon transport. The neutron transport code Rattlesnake is leveraged in this fashion, slightly modi ed to accept input from variables consistent with phonon transport simulations. Several benchmark problems are modeled to assess the potential...
Resource Type:: Masters Thesis

Proof of Concept of the use of Advanced Computational Accident Scenario Modeling for Safety Margin Economic Evaluation

Creator:: Riley, Thomas H.
Abstract:: The goal of this project was to pave the way for more data-driven decision making when considering safety within Nuclear Engineering by proving the concept of new and innovative accident scenario modeling techniques for the analysis of the economics of nuclear safety margins. To do this, a simple, if extremely...
Resource Type:: Dissertation

Reduced Order Modeling of Radiation Diffusion Kinetics via Proper Generalized Decomposition

Creator:: Alberti, Anthony L.
Abstract:: In this dissertation, we attempt to overcome the "curse of dimensionality" inherent to radiation diffusion kinetics problems by employing a novel reduced order modeling technique known as proper generalized decomposition (PGD). After verifying a proposed PGD algorithm and associated solvers through various tests, we explore its performance for computing reduced-order...
Resource Type:: Dissertation

Reliable Integrated Planning: Applications in Hub Network Design and Airline Ground Crew Task Assignment

Creator:: Barahimi, Pouya
Abstract:: In general, making optimal decisions is a never ending challenge that decision makers face. A comprehensive model that integrates decisions at all three levels of decision making (i.e., strategic, tactical, and operational) can help the decision maker to find solutions that best serve the organization's performance. However, as organizations expand...
Resource Type:: Dissertation

Revenue-based spectrum management via Markov decision process

Creator:: Zhu, Pingan
Abstract:: We consider the problem of wireless spectrum management in cognitive wireless networks that maximizes the revenue for a spectrum operator. Specifically, we study the problem on how a wireless spectrum operator can optimally allocate its limited spectrum to various classes users/devices who pay differently for their spectrum per unit time....
Resource Type:: Masters Thesis

Scaling study of the depressurized conduction cooldown event in the high temperature test facility using RELAP5-3D/ATHENA

Creator:: Aldridge, Robert J.
Abstract:: In 2008, the Department of Energy (DOE) and Nuclear Regulatory Commission (NCR) decided that the Next Generation Nuclear Plant (NGNP) would be the Very High Temperature Reactor (VHTR). In support of the licensing and validation effort of the VHTR, Oregon State University was tasked with designing, building, and operating a...
Resource Type:: Masters Thesis

Seismic performance of diagrid steel structures using single and double friction mass dampers

Creator:: Ramadhan, Garlan
Abstract:: The steel diagrid structural system is a recent load bearing and lateral resisting structural system for tall building structures that is relatively unexplored in the western United States. One possible reason for the little use of diagrid systems in earthquake prone regions is the lack of guidelines and application examples...
Resource Type:: Masters Thesis

Solution-based deposition of functional thin films : development of a glucose biosensor and thermal processing of CZTS nanoparticle films

Creator:: Durgan, Christopher J.
Abstract:: The development of solution-based methods for deposition of different thin film material is presented as an alternative to high cost vacuum-based methods. For certain materials, vacuum techniques are unsuitable for processing. Additionally, vacuum-based processes present high capital costs associated with equipment, and slow processing times. Atmospheric pressure solution based techniques...
Resource Type:: Masters Thesis

Search Constraints

Search Results

Limit your search