Monotonic and cyclic tests were carried out to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with 8 mm and 10 mm diameter self-tapping screws. The goal of this research is to compare test values of cross-laminated timber (CLT) diaphragm connections in seismic force-resisting systems...
Seismic design of wood-frame single-family dwellings’ (WFSFD) lateral force–resisting systems requires determination of the stiffness of horizontal diaphragms and shearwalls. During design, sizes and locations of shearwall openings are often changed, altering shearwall stiffness and loads and requiring a significant redesign effort. Rigid and tributary area method analyses are examined...
Ten full size (3.7 x 4.9 m) plywood roof diaphragms were constructed using metal plate connected (MPC) common and hip wood trusses or joists, typical of single-family dwelling (SFD) construction. The specimens included three gable roof slopes of 33, 67 and 100%, a hip roof of 33% slope, and a...
This paper presents the results of a test program whose goal was to better understand the contribution of individual elements to the performance of typical light-frame wood structures during tsunami loading. The intent was to be able to replicate failures in a structural engineering laboratory that were observed during laboratory...
Residential energy use is a significant contributor to greenhouse gas emissions and climate change. Reducing energy efficiency in conventional wood-framed houses are thermal bridges: direct paths that allow heat to flow through the studs instead of the insulation. One suggestion for reducing thermal bridging is the staggered stud (SS) wall....
Ten full-size (3.7×4.9m) plywood roof diaphragms were constructed using metal-plate-connected (MPC) common and hip wood trusses or joists, typical of single-family dwelling (SFD) construction. The specimens included three gable roof slopes of 33, 67, and 100%, a hip roof of 33% slope, and a flat roof, with a horizontal bottom...
The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on sub-assemblies and an L-shaped house. The model of the L-shaped house was then modified and...
There are about 80 million single-family dwellings (SFD) in the United States,
predominantly of wood-frame construction. Of these, 68% are owner occupied. A home is
typically the largest single investment of a family, and is often not covered by earthquake
insurance, even where it is available. Of all the houses...
The objective of this study was to compare structural load path and system behavior of a light-frame (LF) and a timber frame (TF) structure. This load path analysis is part of a broader research effort that compares LF to TF residential structures. Structural analysis software was used to create a...
There are about 80 million single-family dwellings (SFDs) in the United States, predominantly of wood-frame construction. Of these, 68% are owner-occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all the houses in...
The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
Remediation methods and strength predictions were evaluated for wood I-joists with single, circular holes in the webs, leaving utilities in place. A full-scale bending test using four equally-spaced point loads was applied to three depths of joists with varying flange widths and span lengths of 4.88 m and 2.44 m....
Tornadoes represent a unique natural hazard because of the very low probability of
occurrence, short warning times (on the order of only a few minutes), and the intense and
destructive forces imposed on engineered and non-engineered buildings. The very low-probability very high-consequence nature of a tornado strike makes designing for...
Tornadoes represent a unique natural hazard because of the very low probability of occurrence, short warning times (on the order of only a few minutes), and the intense and destructive forces imposed on engineered and nonengineered buildings. The very low-probability/very high-consequence nature of a tornado strike makes designing for survival...
Global sustainability goals have led to the development of the green building movement. The Green Building Program, stemming from the movement, has had unprecedented success as it provides a quantifiable metric to people’s efforts towards sustainable development. Sustainable development and green buildings are often used interchangeably. Although, sustainable development and...
Remediation methods and strength predictions were evaluated for wood I-joists with single, circular holes in the webs, leaving utilities in place. A full-scale bending test using four equally spaced point loads was applied to three depths of joists with varying flange widths and span lengths of 4.88 and 2.44 m....
The performance of full-scale light-frame wood walls subjected to wave loading was examined using the Large Wave Flume of the Network for Earthquake Engineering (NEES) Tsunami Facility at Oregon State University. The hydrodynamic conditions (water level and bore speed) and structural response (horizontal force, pressure, and deflection) were observed for...
Tsunamis have devastated coastal regions worldwide, with the most recent being the result of the Great Tohoku Japan earthquake and tsunami, which was a M9.0 undersea megathrust earthquake that occurred off the east coast of Japan on March 11, 2011. In this study, a fragility formulation is utilized to develop...
Global sustainability goals have led to the development of the green building movement. The Green
Building Program, stemming from the movement, has had unprecedented success as it provides a quantifi able
metric to people’s efforts towards sustainable development. Sustainable development and green buildings are often
used interchangeably. Although, sustainable development...
Fracture toughness of wood and wood composites has traditionally been characterized by a stress intensity factor, an initiation strain energy release rate (G[subscript init]) or a total energy to fracture (G[subscript f]). These parameters provide incomplete fracture characterization for these materials because the toughness changes as the crack propagates. Thus...