Monotonic and cyclic tests were carried out to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with 8 mm and 10 mm diameter self-tapping screws. The goal of this research is to compare test values of cross-laminated timber (CLT) diaphragm connections in seismic force-resisting systems...
A numerical investigation is presented on effects of plan configuration on seismic responses of single-story, wood-frame dwellings. 151 models were developed using observations of 412 dwellings of rectangular, L, T, U, and Z-shapes in Oregon. A nonlinear, time-history program, Seismic Analysis Package for Wood-frame Structures, was the analysis platform. Models...
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
The objective of this study was to compare structural load path and system behavior of a light-frame (LF) and a timber frame (TF) structure. This load path analysis is part of a broader research effort that compares LF to TF residential structures. Structural analysis software was used to create a...
The performance of full-scale light-frame wood walls subjected to wave loading was examined using the Large Wave Flume of the Network for Earthquake Engineering (NEES) Tsunami Facility at Oregon State University. The hydrodynamic conditions (water level and bore speed) and structural response (horizontal force, pressure, and deflection) were observed for...
Ten full-size (3.7×4.9m) plywood roof diaphragms were constructed using metal-plate-connected (MPC) common and hip wood trusses or joists, typical of single-family dwelling (SFD) construction. The specimens included three gable roof slopes of 33, 67, and 100%, a hip roof of 33% slope, and a flat roof, with a horizontal bottom...
There are about 80 million single-family dwellings (SFDs) in the United States, predominantly of wood-frame construction. Of these, 68% are owner-occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all the houses in...
Residential energy use is a significant contributor to greenhouse gas emissions and climate change. Reducing energy efficiency in conventional wood-framed houses are thermal bridges: direct paths that allow heat to flow through the studs instead of the insulation. One suggestion for reducing thermal bridging is the staggered stud (SS) wall....
The objectives of this study were to evaluate the performance of wood-frame shear walls under monotonic, cyclic, and earthquake loads by: 1) comparing performance under each loading protocol; 2) evaluating effects of anchorage; and 3) eval-uating performance qualitatively and quantitatively with respect to code-defined performance measures. Tests were conducted on...
The objectives of this study were to evaluate the performance of wood-frame shear walls under monotonic and cyclic loads by: 1) determining variability of shear wall performance; 2) comparing performance of walls under each loading protocol; 3) evaluating effects of anchorage on wall performance; and 4) evaluating performance of walls...
The objective of this study was to compare the shear strength of structural composite lumber (SCL) based on shear block to that of shear strength based on torsion test. Shear blocks in two diflcrent orientations fom laminated veneer lumber, parallel strand lumber, and laminated strand lumber (LSL) were tested and...
The objective of this research was to use a three-dimensional (3D) analysis method to evaluate “system effects” in light-frame roof truss assemblies. The goal of this study was to develop an improved and practical design method for 3D roof truss assemblies used in residential construction. A truss plate manufacturer (TPM)...
The construction industry has relied heavily on wood and wood-based composites, such as oriented strand board (OSB) and plywood for timber frame construction. Therefore, it is highly imperative to categorize the response of wood-based composites when exposed to elevated temperatures for a sustained period of time. The essence of fire-resistant...
Seismic design of wood-frame single-family dwellings’ (WFSFD) lateral force–resisting systems requires determination of the stiffness of horizontal diaphragms and shearwalls. During design, sizes and locations of shearwall openings are often changed, altering shearwall stiffness and loads and requiring a significant redesign effort. Rigid and tributary area method analyses are examined...
This study investigated the effect of exposure to elevated temperature on the yield strength of single-shear nail connections when subjected to lateral loading. Solid sawn lumber and laminated veneer lumber were used as framing members and two different thicknesses of both oriented strand board and plywood were used as the...
Fracture toughness of wood and wood composites has traditionally been characterized by a stress intensity factor, an initiation strain energy release rate (G init) or a total energy to fracture (G f). These parameters provide incomplete fracture characterization for these materials because the toughness changes as the crack propagates. Thus,...
Remediation methods and strength predictions were evaluated for wood I-joists with single, circular holes in the webs, leaving utilities in place. A full-scale bending test using four equally spaced point loads was applied to three depths of joists with varying flange widths and span lengths of 4.88 and 2.44 m....
Tsunamis have devastated coastal regions worldwide, with the most recent being the result of the Great Tohoku Japan earthquake and tsunami, which was a M9.0 undersea megathrust earthquake that occurred off the east coast of Japan on March 11, 2011. In this study, a fragility formulation is utilized to develop...
This paper highlights the development of a rapid visual screening (RVS) tool to quickly identify, inventory, and rank residential buildings that are potentially seismically hazardous, focusing on single-family, wood-frame dwellings with plan irregularity. The SAPWood software was used to perform a series of nonlinear time-history analyses for 480 representative models,...