Adverse effects on mechanical properties from using a supercritical fluid (SCF) to increase preservative penetration of refractory woods were evaluated by treating small ponderosa pine sapwood specimens with supercritical carbon dioxide at 64 combinations of temperatures (35 to 80 C), pressure (1,000 to 4,000 psig), and time (0.5 to 2...
A small block test was used in assessing whether pelletized sodium n-methyldithiocarbamate (NaMDC) would decompose and produce methylisothiocyanate (MITC) and thereby eliminate Antrodia carbonica colonies from Douglas-fir heartwood. Also evaluated were the effects of wood moisture content, dosage, incubation period, pH level, and presence of copper sulfate on percentage of...
Wood that is submerged in fresh water for long periods has increased permeability and other changed properties. Wood that is submerged in salt water may absorb considerable quantities of salts, which may render the wood resistant to microbial colonization. In this report, we describe decay tests on Douglas-fir sapwood and...
Impact bending and breaking radius were used to measure loss in toughness caused by basidiomycetes isolated from wood. Small test pieces were used to accelerate testing. Wide differences were found among, and sometimes within, the 26 species tested. Brown-rot fungi tended to cause greater losses than white-rot fungi, but no...
The specification, inspection, and remedial treatment of utility poles are addressed. Included are discussions of enhancing specifications for improved performance, techniques for detecting decay and other defects, and chemical treatments available for arresting decay of poles in service.
The fungitoxicity of carbon disulfide (CS2), methylisothiocyanate (MITC), or a mixture of these two gases, to selected wood-degrading fungi was studied by using a fumigation apparatus. Both gases are important decomposition products of metham sodium, the most commonly used fumigant for internal treatment of large wood members. Carbon disulfide (up...
) ............................................................... 44
c. Moisture Meter ....................................................................... 44
d
) ............................................................... 44
c. Moisture Meter ....................................................................... 44
d