Common methods for assessment of surface checking in decorative plywood panels rely on manual handling and visual inspection of specimens, a laborious procedure practically limiting the number of materials and variables that may be considered within one project. In this study, a new automated optical method for detection and measurement...
The effect of blue stain on shear strength of cold-set polyurethane resin (PUR) bonds was investigated using lodgepole pine lumber with varying degrees of stain and two different wood grain orientations. While blue stain was associated with definite differences in wood permeability, it had no negative effect on shear strength...
The load transfer between wood particles and
the matrix was analyzed by observation of the strain patterns
in thin films of high density polyethylene (HDPE)
with embedded wood particles subjected to tensile loading.
Optical measurement techniques based on the digital
image correlation (DIC) principle were employed for quantitative
measurement of...
The U.S, Forest Service regularly removes tons of dead biomass from federal forestlands to control and prevent devastating wildfires. Every year thinning young trees and brush, as well as removing dead biomass from the forest floor generates large quantities of low-grade woody material for which there is little use. Currently...
Droplet dynamics analysis concerns the measurements of droplet volume, cap and base areas and
contact angles, as they change in time to study evaporation, wettability, adhesion and other
surface phenomena and properties. In a typical procedure, the two-dimensional measurements
are based on a series of images recorded at successive stages...
The goal was to determine local mechanical properties inside of oriented strand board (OSB) based on a realistic morphology-based finite element (FE) model and data acquired from a physical test performed on the same material. The spatial information and local grayscale intensity from CT-scans obtained from small OSB sample was...