Index Catalog // ScholarsArchive@OSU

Creator:: Eickner, Herbert W., Mraz, Edward A., Bruce, H. D., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed July 1955 and 1962.
Resource Type:: Technical Report
Full Text:: gluing wood to metal. Lap-joint specimens prepared by gluing strips of metal to wood were stressed

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed June 1960. Original report dated November 1944.
Resource Type:: Technical Report
Full Text:: of bleed-through; (2) the secondary gluing of plywood showing various amounts of bleed-through; and

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed June 1960. Original report dated September 1946.
Resource Type:: Technical Report
Full Text:: conditioned to equilibrium in air at 80° F. and 65 percent relative humidity before gluing. The panels were

Creator:: Olson, W. Z. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1960. Original report dated March 1955.
Resource Type:: Technical Report
Full Text:: '. OREGON STATE UNIVERSITY c)SI f; GLUING CHARACTERISTICS Of CHINQUAPIN TANOAIC, CALIFORNIA LAUREL

Creator:: Werren, Fred, Freas, Alan D'Yarmett, 1910-, and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed October 1961. Original report published in October 1950.
Resource Type:: Technical Report
Full Text:: - tween sections of the cured laminate. The scarf-joint tests involved a variety of gluing techniques and

ScholarsArchive@OSU