Index Catalog // ScholarsArchive@OSU

Creator:: Abbott, Vaughn William
Abstract:: The base Al-Zn superplastic alloy was investigated at 250°C to determine the effect of small amounts of magnesium on mechanical properties. Six alloys of nominal composition 0.00, 0.10, 0.25, 0.50, 0.75, and 1.00 weight percent magnesium, constant 78 weight percent zinc, and variable 21 to 22 weight percent aluminum were...
Resource Type:: Masters Thesis
Full Text:: microstructure of the Al -Zn base alloy containing one percent magnesium. Unde- formed grip section, 500x. 35

Creator:: Guthrie, J. L. (James Leonard), 1937-
Abstract:: The thesis was an investigation into the mechanism of precipitation from solid solution in an Aluminum-0.7% Magnesium-0.6% Silicon alloy containing iron impurities. Laue x-ray diffraction patterns were obtained from solution heat treated and aged single crystal specimens in various crystallographic orientations. Precipitation related streaking was detected on some of the...
Resource Type:: Masters Thesis
Full Text:: an aluminum-magnesium-silicon alloy using x-ray diffraction techniques AN ABSTRACT OF THE THESIS OF

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed March 1956 and 1962. Original report issued December 1950.
Resource Type:: Technical Report
Full Text:: A STUDY OF METHODS FOR PREIPAVING CLAD 24S-T ALUMINUM-ALLOY SHEET

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report dated August 1955.
Resource Type:: Technical Report
Full Text:: tests were made of lap-joint specimens of clad 75S-T6 aluminum alloy with various lengths of overlap and

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published December 1949.
Resource Type:: Technical Report
Full Text:: Report No. 1804. Specimens and Methods of Testing Plates of clad 243-T3 aluminum alloy 5 by 8 inches

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: Information reviewed and reaffirmed May 1959 and 1965. Report originally published June 1953.
Resource Type:: Technical Report
Full Text:: PROPERTIES CI STRUCTURAL METAL-IC-METAL ADHESIVES IN BONDS TO 24S-T3 ALUMINUM ALLOY Information Reviewed

ScholarsArchive@OSU