With increasing operating frequencies in CMOS RF/microwave integrated circuits,
the performance of on-chip interconnects is becoming significantly affected by the lossy
substrate. It is the purpose of the first part of this thesis to develop a rigorous field
theoretic analysis approach for efficient characterization of single and multiple coupled
interconnects...
Plastic packaging is a cost-effective solution for housing RF and microwave integrated circuits in low cost communication devices. While enabling low cost packaging of integrated circuits, plastic packages including the circuit ground patch (paddle) inside the package can have a significant parasitic effect on circuit performance. The purpose of this...
The widespread use of TCP as a transport layer protocol for mobile ad-hoc networks and wireline networks has motivated the need to make its implementation highly power efficient specially with respect to ad hoc radio networks. Over the past years many researchers have developed energy efficient protocols for mobile ad-hoc...
Traditionally sinusoidal signal generation has been implemented with purely analog circuits such as phase-locked loops. The alternative of using a digital system to perform this signal generation has previously been unattractive due to limitations in clock frequency and size. However, recent advancements in sub-micron fabrication techniques have made the digital...
During the last few years we have seen formidable advances in digital and mobile
communication technologies such as cordless and cellular telephones, personal
communication systems, Internet connection expansion, etc. The vast majority
of digital information used in all these applications is stored and also processed
within a computer system, and...
With the success of the CounterDataFlow Pipeline microarchitecture developed by Oregon State University, there is increasing demand for a highly flexible high-level simulator modeling tool to support the further expansions and studies of the Counterflow pipeline processors family. This work examines the implementation of a Java-based execution-driven simulator modeling tool,...
In recent years, the elliptic curve cryptosystems (ECC) have received attention
due to their increased security with smaller key size which brings the advantage of less
storage area and less bandwidth. Elliptic curve cryptography provides a methodology
for obtaining high-speed, efficient, and scalable implementations of network security
protocols. In addition...
The harmonic problem in power systems is gaining more attention as incidences correlated with harmonics increase. Conventional passive filtering techniques for harmonic mitigation have inherent problems, and purely active filters have the disadvantages of higher costs and ratings. Hybrid active filters inherit the efficiency of passive filters and the improved...
This research develops an object-oriented approach of modeling microprocessor architecture. A generic modeling library, bBlocks, is proposed as a framework for constructing microprocessor simulation. bBlocks is a collection of predefined abstract components (blocks) implemented in Java, the object-oriented programming language. Blocks are defined and used as the basic components in...
As the information-processing and telecommunications revolutions now underway will continue to change our life styles in the rest of the 21st century, our personal and economic lives rely more and more on our ability to transact over the electronic medium in a secure way. The privacy, authenticity, and integrity of...
The achievements of this thesis are the development of several models for the SPICE (Simulation Program with Integrated Circuit Emphasis) simulation of alternating-current thin-film electroluminescent (ACTFEL) devices, organic light-emitting devices (OLEDs), and polymer light-emitting devices (PLEDs). First, an ACTFEL model based on the built-in HSPICE Fowler-Nordheim tunneling diode is developed,...
This thesis deals with 1/f noise in p-MOS, bipolar, and lateral bipolar transistors. Experimental measurements determine the appropriate 1/f noise for MOSFET's, bipolar transistors and lateral bipolar transistors. The literature on 1/f noise in p-MOSFETs, bipolar transistors and lateral bipolar transistors is reviewed. The two main sources of low frequency...
The goal of this thesis study is to develop an activated reactive evaporation (ARE) system and to demonstrate its utility by fabricating-alternating current thin-film electroluminescent (ACTFEL) oxide phosphor devices. ARE entails evaporation in an activated gas. The main ARE system components are three thermal evaporation sources, a microwave power supply,...
In this thesis, we develop a simulator for estimating the energy consumed in executing tasks on a mobile device - the Palm Pilot. We measured the energy consumed by each instruction of the device's assembly language and incorporated these measurements into a public domain emulator for the Palm Pilot. This...
The design of a switched capacitor successive approximation A/D converter is discussed in this thesis. This design adopts a novel capacitance mismatch error cancellation algorithm proposed in references [25, 27]. Detailed charge domain analysis is given in this thesis, which results in an improvement of the proposed algorithm by tracing...
Previous studies on low frequency flicker noise in bipolar junction transistors (BJT) are reviewed. The original BJT flicker noise sources are mainly attributed to the fluctuation in base surface recombination and the fluctuation in the mobility or diffusivity of free charge carriers. Our experiments were done to verify a newly...
In this thesis, the literature relating to charge pump dc-dc converters and their uses is reviewed. Charge pumps are useful in many circuits, including low-voltage circuits, dynamic random access memory circuits, switched-capacitor circuits, EEPROM's and transceivers. The important issues relating to charge pump design are power efficiency, output voltage ripple...
A remote Digital Signal Processing (DSP) lab for the Internet is developed to give students the opportunity to work together online with a remotely located Digital Signal Processor (DSP). Students in different locations can work together with the DSP as if they were present in the lab. To make this...
The importance of spectral efficiency in mobile communications often requires the use of non-constant-envelop linear digital modulation schemes. These modulation techniques carry signal information in both magnitude and phase, thus they must be linearly amplified to avoid nonlinear signal distortion which is not correctable in a typical receiver. A second...
Direct-conversion architecture would dominate the modern low power wireless receiver architecture if problems such as offset cancellation, even-order distortion, and flicker noise were solved. Among those problems, offset is the most serious one. This thesis will discuss and analyze one approach to cancel offsets in direct-conversion receivers. First, we explain...
Internet appliances at home are still at the beginning stage of development now. Many solutions are provided to connect those home appliances on net by wireless way or through wire. However, this thesis only focuses on the key issue of internet appliances, which is connectivity symbolized by the TCP/IP layer...
The tremendous growth of wireless and mobile communications has resulted in placing of stringent requirements on the channel spacing and, by implication, on the phase noise of oscillators, typically mandating the use of passive LC oscillators with high quality factor (Q). However the trend towards large-scale integration and low cost...
With the increased attention on high efficiency and energy savings, power electronic energy conversion equipment is increasingly incorporated in all levels of the power system. The drawback of such equipment is the generation of nonsinusoidal currents in the power distribution network due to the nonlinear operation. Harmonic currents may distort...
Power quality has become an important concern to both electric utilities and
end users due to the increased use of non-linear loads in modem power systems
over the past decade. Nonlinear loads inject harmonics into the power system and
thus may lead to poor power quality and lower power factor....
This document investigates, justifies, designs, and simulates the application of a fuzzy logic controller/optimizer in a sawmill bucking system application that is the first production station where stems coming from the mountains are processed in a sawmill. One of the areas of success in the application of fuzzy logic is...
This thesis presents a design-oriented model for lightly doped CMOS substrates. The model predicts the substrate noise coupling between noisy digital and sensitive analog blocks in the early stages of the design. The model scales with the size and separation of these blocks and it is validated with device simulations...
Modular multiplication is a widely used operation in cryptography. Several well-known applications, such as the decipherment operation of the RSA algorithm, the Diffie-Hellman key exchange algorithm, as well as some applications currently under development, such as the Digital Signature Standard and elliptic curve cryptography, all use modular multiplication and modular...
This thesis will discuss two critical components of a digital system -- domino logic styles and flip-flops. In today's microprocessors, both domino logic and flip-flops are essential to high-performance and low-power design. Two new domino logic styles are presented and analyzed, Double Edge Triggered (DET) and Double Data Rate (DDR)...
This thesis presents a systematic top-down methodology for simulating a phase-locked loop using a macro model in Verilog-A. The macromodel has been used to evaluate the jitter due to supply noise, thermal noise, and ground bounce. The noise simulation with the behavioral model is roughly 310 times faster (best case)...
Dynamic DC offset is one of the biggest problems preventing the implementation of single chip receivers. This thesis presents a 2.4GHz downconversion mixer designed to work with adaptive DC offset cancellation for a fully integrated direct conversion receiver. Offset can be removed by dynamically changing the PFET load bias in...
Current superscalar microprocessors' performance depends on its frequency and the
number of useful instructions that can be processed per cycle (IPC). Higher frequency
is achieved with process advancement, new circuit techniques, and microarchitectural
improvement. Number of instructions processed per cycle depends mainly on
microarchitecture techniques that exploit parallelism both spatially...
The thesis presents a new algorithm and structure that is to be used in conjunction with a specially modified CMOS Gilbert cell mixer to remove time-varying DC offsets in direct conversion receivers. In our approach, the DC offset is detected at the output of the mixer using a dedicated coarse...
The objective of the research presented in this thesis is to develop, implement, and demonstrate the utility of an n-sheet, state-space alternating-current thin-film electroluminescent (ACTFEL) device model. In this model, the phosphor layer is discretized into n + 1 layers, with band-to-band impact ionization, space charge creation/ annihilation, and luminescent...
The quest to achieve reliable communication has always existed. Error Correcting codes have made communication systems even more reliable under high signal to noise ratios. A new class of codes called Turbo codes have proved to be more effective compared to the other classes of codes and achieve performance close...
We present a new circuit design for adaptive offset cancellation in a fully differential 2.4 GHz CMOS direct conversion mixer. Our circuit structure is a modification of a Gilbert cell mixer in which offsets are cancelled by injecting cancellation currents into the legs of the mixer by dynamically varying the...
This thesis investigates an implementation of speech recognition front-end. It is an application specific integrated circuit (ASIC) solution. A Mel Cepstrum algorithm is implemented for the feature extraction. We present a new mixed split-radix and radix-2 Fast Fourier Transform (FFT) algorithm, which can effectively minimize the number of complex multiplications...
The design of mixed-signal integrated circuits has evolved from simple analog and digital circuits operating on the same silicon substrate to the point that now we have complete system on a chip solutions for communication systems. The levels of integration needed to remain cost effective in today's integrated circuit (IC)...
Several papers propose the use of on-line arithmetic for signal processing applications implemented on FPGAs. Although those papers provide reasonable arguments for the use of on-line arithmetic, they give only inadequate or incomplete comparisons of the proposed on-line designs to other state of the art solutions on FPGAs. In this...
With the increased attention on high efficiency and controllability of industrial processes, as well as reduced weight, volume and cost of consumer products, the applications of nonlinear power electronic converters such as adjustable speed drives (ASDs) are showing a rapid rise. Power Quality (PQ) is becoming an increasing concern with...
The Elliptic Curve Digital Signature Algorithm (ECDSA) is one of the most popular algorithms to digitally sign streams or blocks of data. In this thesis we concentrate on porting and optimizing the ECDSA on the ARM7 processor for a particular NIST curve over GF(2[superscript m]). The selected curve is a...
In this dissertation, a new Δ∑ A/D converter is presented that is ideally suited for communication applications. It is based on a single-loop single-stage structure, which can realize a high maximum out-of-band quantization noise gain while maintaining stable operation and thus achieve 14-bit resolution at 8 times oversampling. A fifth-order...
Switched-capacitor (SC) circuits are commonly used for analog signal processing because they can be used to realize precision filters and data converters on an integrated circuit (IC). However, for high speed applications SC circuit operating speeds are limited by the internally-compensated opamps found in SC integrators, a common building block...
A computationally efficient and accurate substrate noise coupling model for multiple contacts in heavily doped CMOS processes is presented and validated with simulations and experimental data. The model is based on Z parameters that are scalable with contact separation and size. This results in fast extraction of substrate resistances for...
The electrical performance of on-chip interconnects has become a limiting factor to the performance of modern integrated circuits including RFICs, mixed-signal circuits, as well as high-speed VLSI circuits due to increasing operating frequencies, chip areas, and integration densities. It is advantageous to have fast and accurate closed-form expressions for the...
Utilizing a two-capacitor topology, the digital implementation of an audio-band successive-approximation analog-to-digital converter (ADC) is explored in the context of mismatch-shaping where the mismatch estimates are accurate to the first order. A second-order Δ∑ loop was found to be effective in system simulations given a 0.1% capacitor mismatch. Spectral analysis...
In this thesis, we study the Karatsuba-Ofman Algorithm (KOA), which is a recursive multi-precision multiplication method, and improve it for certain special applications. This thesis is in two parts. In the first part, we derive an efficient algorithm from the KOA to multiply the operands having a precision of 2[superscript...
We describe novel methods for obtaining fast software implementations of the arithmetic operations in the finite field GF(p) and GF(p[superscript k]). In GF(p) we realize an extensive speedup in modular addition and subtraction routines and some small speedup in the modular multiplication routine with an arbitrary prime modulus p which...
The most accurate method for performing analog signal processing in MOS (metal-oxide-semiconductor) integrated circuits is through the use of switched-capacitor circuits. A switched-capacitor circuit operates as a discrete-time signal processor. These circuits have been used in a variety of applications, such as filters, gain stages, voltage-controlled oscillators, and modulators. A...
The design of two 2.4GHz CMOS LC balanced oscillators in the 0.25μm National BiCMOS process for Bluetooth specifications is presented. These oscillators achieve low phase noise with low power consumption. At a frequency offset of 500KHz from the 2.11GHz carrier, the measured phase noise is -101.9dBc/Hz for the NMOS oscillator...
This thesis presents distinctly different methods of accurately predicting phase noise and absolute jitter in ring oscillators. The phase noise prediction methods are the commercially available SpectreRF and isf_tool, a simulator developed in this work from the Hajimiri and Lee theory of phase noise. Absolute jitter due to deterministic supply...
Modular exponentiation and modular multiplication are the most used operations in current cryptographic systems. Some well-known cryptographic algorithms, such as RSA, Diffie-Hellman key exchange, and DSA, require modular exponentiation operations. This is performed with a series of modular multiplications to the extent of its exponent in a certain fashion depending...
An analysis that accounts for the effect of standard electrostatic discharge (ESD) structures on critical LNA specifications of noise figure, input matching and gain is presented. It is shown that the ESD structures degrade LNA performance particularly for higher frequency applications. Two LNAs, one with ESD protection and one without,...
Concurrent error detection (CED) is the detection of errors or faults in a circuit or data path concurrent with normal operation of that circuit. The general approach for CED is to calculate a check symbol for the inputs to the circuit under operation, predict the check symbol that will result...
In this work a new voltage buffer, the drain-follower, achieves 300MHz band-width with 2pF load, a dc gain of 0.993V/V, 1mV offset voltage, -60 dB total harmonic distortion at 1.4Vpp output voltage and 6.5mW power dissipation from 5V supply. A unity-gain buffer switched-capacitor biquad filter has been implemented in 0.5μm...
Voltage converters or charge pumps find their use in many circuits. They are extensively used in hand held devices as cell phones, pagers, PDA's and laptops. Some of the important issues relating to design of voltage regulators for handheld devices are size, efficiency and noise. Another important factor to be...
Power is a valuable resource. It is invaluable when for mobile devices. Mobile devices, due to their mobility cannot get a continuous source of power and derive their power from a battery contained in them. The main consumer of power in the mobile is its transmitter. With a limited power...
The problem of ensuring Quality of Service (QoS) on a TCP/IP based fixed-infrastructure network has been well studied and several working proposals exist. An allied problem is that of ensuring QoS on an ad-hoc wireless network, where the requirements are similar, but the operating conditions are different enough to warrant...
The objective of this thesis is to provide an initial demonstration of the feasibility of constructing highly transparent active electronic devices. Such a demonstration is successfully achieved in the fabrication of ZnO-based thin film transistors (TFTs) exhibiting transparency greater than ~90% in the visible portion of the electromagnetic spectrum and...
A differential current-mode track-and-hold (T/H) amplifier is used to sample an analog input signal. A new closed-loop current-mode architecture has been developed that overcomes the stability problems associated with closed-loop architectures. The T/H circuit has been fabricated in a 0.35-μm quad-metal, double-poly CMOS process. The measured total harmonic distortion (THD)...
The computation of the inverse of a number in finite fields, namely Galois Fields GF(p) or GF(2ⁿ), is one of the most complex arithmetic operations in cryptographic applications. In this work, we investigate the GF(p) inversion and present several phases in the design of efficient hardware implementations to compute the...
Synchronous machines provide a practical way to control reactive power consumption of a plant. One of the main advantages of using synchronous motors in a plant is their ability to generate reactive power for plant loads. A new control scheme for synchronous motor excitation systems is developed to automate reactive...
A primarily software based Fourier Deep Level Transient Spectroscope (FDLTS) is built. The raw capacitance transient is acquired and digitized using capacitance meter HP4280A whereas the signal analysis is done using a customized software module. The software module calculates both the conventional DLTS spectrum and the Fourier DLTS spectrum. This...
Modular Multiplication is a time-consuming arithmetic operation because it involves multiplication as well as division. Modular exponentiation can be performed as a sequence of modular multiplications. Speeding the modular multiplication increases the speed of modular exponentiation. Modular exponentiation and modular multiplication are heavily used in current cryptographic systems. Well-known cryptographic...
The parasitic components of MOS switches at high speeds affect the linearity and resolution of CMOS sample and hold circuits. CCD-based circuit design can offer good performance at high speeds. This thesis presents the design of sample and hold circuits using charge-coupled device structures in a standard CMOS process. Three...
The wakeup logic in out-of-order superscalar microprocessors is responsible for resolving the data dependency hazard between instructions. Its performance is critical because it may prevent the processor to have deeper pipelines or to achieve the highest IPC (Instructions Per Cycle) possible. In this thesis, we implemented the circuit and layout...
A scalable macromodel for substrate noise coupling in lightly doped substrates with and without a buried layer has been developed. This model is based on Z-parameters and is scalable with contact size and separation. This model requires process dependent parameters that can be extracted easily from a small number of...
Modular arithmetic operations (i.e., inversion, multiplication and exponentiation) are used in several cryptography applications, such as decipherment operation of RSA algorithm, Diffie-Hellman key exchange algorithm, elliptic curve cryptography, and the Digital Signature Standard including the Elliptic Curve Digital Signature Algorithm. The most important of these arithmetic operations is the modular...
Fiber Bragg grating sensors have been constantly researched for the last ten years and have finally begun to find use in the commercial market. However, one of the major factors limiting their widespread use is their system cost. Their lightweight, flexibility, electromagnetic immunity, and small size make fiber Bragg grating...
While the performance gap between microprocessors and main memory is ever increasing each year, cache memory has been a bridge to alleviate this discrepancy. In this thesis proposal, we introduce three techniques to tolerate this processor and memory speed imbalance. First, we propose the bloom filter scheme to identify which...
Turbo codes have been used successfully for error correction in digital communications, however, their application to wireless mobile communications is still a fresh research topic. The objective of this thesis is to present a new solution that involves the usage of turbo codes, spatial diversity, and orthogonal complementary codes in...
A radix-based calibration technique was previously proposed with a two-stage algorithmic analog-to-digital converter (ADC). The objective of this work is to verify the capability of radix-based calibration for a true multi-stage ADC. In order to prove the idea, a single bit-per-stage, 20-stage pipelined ADC is designed in a 0.35-μm CMOS...
Continuous process scale-down and emerging markets for low-power/low-voltage mobile systems call for low-voltage analog integrated circuits. Switched-capacitor circuits are the building blocks for analog signal processing and will encounter severe overdrive problems when operating at low-voltage conditions. There are several well-known techniques to bypass the problem. These approaches include: (1)...
The radiation effects in III-V heterojunction devices are investigated in this thesis. Two types of heterojunction devices studied are InGaP/GaAs single heterojunction bipolar transistors (SHBTs) and GaN-based heterojunction light emitting diodes (LEDs). InGaP/GaAS HBTs are investigated for high energy (67 and 105 MeV) proton irradiation effects while GaN heterojunction LEDs...
In high-frequency circuit design, performance is often limited by the quality of the passive components available for a particular process. Specifically, spiral inductors can be a major bottle-neck for Voltage-Controlled Oscillators (VCOs), Low-Noise Amplifiers (LNAs), mixers, etc. For designers to correctly optimize a circuit using a spiral inductor, several frequency-domain...
Algorithms and simulators comprised of SPICE3 as a circuit level simulator and two device simulators EOFLOW and PROPHET for accurate simulation of new types of devices are presented in this thesis. An integration of EOFLOW with SPICE3 creates a capability for efficient simulation of a system containing interconnected electroosmotic flow...
This dissertation investigates diverse techniques to support multithreading in modern high performance processors. The mechanisms studied expand the architecture of a high performance superscalar processor to control efficiently the interaction between software-controlled and hardware-controlled multithreading. Additionally, dynamic speculative mechanisms are proposed to exploit thread-level-parallelism (TLP) and instruction-level-parallelism (ILP) on a...
This thesis presents a continuous time bandpass delta sigma modulator with frequency translation inside the delta sigma loop. The input IF signal is down converted to baseband after amplification by a low Q, wideband bandpass resonator. The down converted IF signal is digitized by a continuous time, second order lowpass...
The dependence of the substrate resistance, R[subscript sub], for MOS transistor RF modeling on transistor biasing and layout is studied from device simulations and measurements. Though R[subscript sub] is found to be bias dependent, the error incurred by assuming a constant value equal to the DC resistance is not significant....
This thesis presents Silencer!, a fully automated, schematic-driven tool for substrate noise coupling simulation and analysis. It has been integrated in the CADENCE DFII environment and seamlessly enables substrate coupling analysis in a standard mixed-signal design flow. Silencer! aids IC designers in the analysis of substrate noise coupling at different...
Ad Hoc networks are multi-hop wireless networks consisting of mobile hosts. They do not have any pre-existing network infrastructure and are characterized by constantly changing topology, limited battery power and bandwidth. Typical applications of such networks are battlefield networks, medical relief during natural calamities or disasters, conference room networking, and...
To protect the environment and save human lives, the detection of various hazardous toxins of biological or chemical origin has been a major challenge to the researchers at Oregon State University. Living fish cells can indicate the presence of a wide range of toxins by reactions such as changing color...
This thesis presents an algorithm that estimates motion in image sequence using wavelet transform. The motion detection is performed under unfavorable conditions of background movement, change of brightness, and noise. The algorithm is tolerant to brightness changes, noise, and small movement in the background. The false alarm rate of motion...
Image segmentation is the process by which an image is divided into number of regions. The regions are to be homogeneous with respect to some property. Definition of homogeneity depends mainly on the expected patterns of the objects of interest. The algorithms designed to perform these tasks can be divided...
The purpose of the thesis is to design and develop a network of automated, distributed, living cell-based sensors, called CytoSensors. Their main role is to detect a variety of biological and chemical toxins. The system is designed to help researchers to carry out multitude of experiments, in order to build...
CytoSensor system integration and design is driven by requirements generated by the need to complete biological experiment operations. The system is used for toxin-based detection which will identify and quantify unknown input toxins by using a biosensor based on a living fish chromatophore. The system consists of 3 main parts:...
Multimedia applications such as video streaming and Voice over IP are becoming common today with the tremendous growth of the Internet. General purpose operating systems thus are required to support these applications. These multimedia applications have some timing constraints that need to be satisfied for good quality. For example, video...
A variable gain, high linearity, low power baseband filter for WLAN applications is implemented in a 1.5 V 3 V 0.15 μm CMOS process. This fourth-order low-pass filter, which is introduced in the transmit channel as a reconstruction filter between the D/A converter and the mixer, has a measured cut-off...
This thesis presents and examines the concept that the output of a wound-rotor induction generator (WRIG) can be limited by means of linking to external impedances for wind-turbine generating system application. An 80kW-WRIG is simulated as a model to examine the control of the output power vs. speed characteristic. Model...
High bandwidth of networks demands high performance communication processors that integrate application processing, network processing, and system support functions into a single, low cost System-On-Chip (SOC) solution. However, conventional processors, when used in network related applications, are beset by the overhead of save/restore of register context, cache misses due to...
The growth of applications for embedded processors has spawned a need for highly configurable devices. Custom microprocessors have long life cycles for a fast paced market, where as off-the-shelf designs often do not provide the level of configuration, nor the ability to allow system-on-chip designs. This paper presents a description...
Random number generation is important in many fields today. It is particularly important in the field of cryptography when generating nonce values, cryptographic keys, and other data required in many cryptographic applications. The proliferation of small, handheld devices that are typically connected to large networks via a wireless connection requires...
Recently, switched capacitor DC/DC converters are extensively used in portable electronic devices because they feature many advantages, such as high efficiency, small package, low quiescent current, minimal external components and low cost. In this thesis, two step-down switched capacitor DC/DC converters are designed. One has the fixed output options 1.5V,...
Power and timing requirements are becoming more and more stringent as applications move from less mobile devices to more mobile ones. As such, it is important to optimize these applications as much as possible in order to provide the best solution that is low power and low latency. Although there...
Instant Messaging (IM) has grown rapidly among network users. It has even become a very important tool for the industry around the world. It is used in scheduling meetings, exchanging business information and clients information, and so on. Instant Messaging has been developed by private sectors or providers such as...
This thesis presents algorithms and tools for the automated design of RF LC CMOS voltage controlled oscillators (VCOs) with low phase noise given a set of specifications. The electromagnetic solver, ASITIC, combined with the circuit simulator, SpectreRF, allows optimization of the VCO circuit parameters and inductor layout. This approach gives...
The transition from second-generation (2G) to third-generation (3G) wireless cellular and cordless telephone systems requires multi-standard adaptability in a single RF receiver equipment. An important answer to this request is the use of Delta-Sigma modulators for IF-to-baseband conversion, which will satisfy the dynamic range requirements for digital signal processing, and...
The evaluation of the stray-load losses in induction motors is an important part of the efficiency estimation process. However, stray-load losses have several components which are difficult to isolate and calculate. Consequently, they are more readily determined by test. IEEE Standard 112-1996 recommends the testing of electrical induction motors at...