Index Catalog // ScholarsArchive@OSU

Diagnostic analysis for mechanical systems

Creator:: Henning, Scott A.
Abstract:: An analysis and modeling method of the diagnostic characteristics of a mechanical or electromechanical system is presented. Diagnosability analysis is especially relevant given the complexities and functional interdependencies of modern-day systems, since improvements in diagnosability can lead to a reduction of a system's life-cycle costs. The diagnosis process of a...
Resource Type:: Masters Thesis
Full Text:: multiple functions and are managed by sophisticated computer control systems [Manelski 1998]. While the

A comprehensive evaluation of product quality in the Pacific Whiting (Merluccius productus) and Albacore tuna (thunnus alalunga) industries

Creator:: Greene, Elizabeth
Abstract:: In the highly competitive animal protein market, seafood faces increasing pressure to improve and standardize product quality. While there is general consensus that quality can be improved for many seafood products, there is little agreement on the types and levels of characteristics that should define "quality." This is a fundamental...
Resource Type:: Masters Thesis
Full Text:: Evaluation of Product Quality in the Pacific Whiting (Merluccius productus) and Albacore Tuna (Thunnus

Multivariate control charts for nonconformities

Creator:: Chattinnawat, Wichai
Abstract:: When the nonconformities are independent, a multivariate control chart for nonconformities called a demerit control chart using a distribution approximation technique called an Edgeworth Expansion, is proposed. For a demerit control chart, an exact control limit can be obtained in special cases, but not in general. A proposed demerit control...
Resource Type:: Dissertation
Full Text:: been addressed in the literature. Pate! (1973) proposed a statistical quality control method for a

An experimental study of cost cognizant test case prioritization

Creator:: Goel, Amit
Abstract:: Test case prioritization techniques schedule test cases for regression testing in an order that increases their ability to meet some performance goal. One performance goal, rate of fault detection, measures how quickly faults are detected within the testing process. The APFD metric had been proposed for measuring the rate of...
Resource Type:: Masters Thesis
Full Text:: provide confidence that the quality of the system is maintained after such changes. Software engineers

Statistical process control part 4: Flowcharts

Creator:: Oregon State University. Extension Service, Leavengood, Scott A., and Reeb, J. E. (James Edmund), 1951-
Abstract:: Flowcharts graphically represent the steps in creating a product or service. The process of creating a chart is often beneficial because personnel may be unaware of all the “nitty-gritty” details involved in producing the product. Also, people often are surprised to learn of the differences between the ideal process flow...
Resource Type:: Technical Report
Full Text:: con- vened a team of personnel from engineering, sales, production, quality control, and management to

Statistical process control part 3: pareto analysis and check sheets

Creator:: Oregon State University. Extension Service, Leavengood, Scott A., and Reeb, J. E. (James Edmund), 1951-
Abstract:: Part 1 in this series introduced the reader to Statistical Process Control, and Part 2 provided an overview of how and why SPC works. Part 3 begins the step-by-step process of building the practical skills necessary for hands-on implementation of SPC. This report discusses Pareto analysis, a tool we can...
Resource Type:: Technical Report

Statistical process control. Pt. 5: Cause-and-effect diagrams

Creator:: Leavengood, Scott A., Reeb, J. E. (James Edmund), 1951-, and Oregon State University. Extension Service
Abstract:: In Part 5, we now turn our attention to cause-and-effect diagrams (CE diagrams). CE diagrams are designed to help quality improvement teams identify the root causes of problems.
Resource Type:: Technical Report
Full Text:: : Goal/QPC). http://www. goalqpc.com Ishikawa, K. 1982. Guide to Quality Control (Tokyo, Japan: Asian

Influence of veneer roughness, lathe check, and annual ring characteristics on glue-bond performance of Douglas-fir plywood

Creator:: DeVallance, David B.
Abstract:: Current lathe technology, smaller diameter logs, smaller core diameters, and the sale of higher grade veneer for use in engineered wood products are all factors contributing to plywood manufacturers using rougher veneer with different lathe check characteristics. When rough veneer is encountered, plywood manufacturers typically increase the adhesive spread rate...
Resource Type:: Masters Thesis
Full Text:: understanding their formation, effect on glue-bond quality, and best methods to control their formation during

Statistics and metrics generator for web-based software installation

Creator:: Guruprasad, Arvind
Abstract:: Statistics and Metrics Generator (SMG), is a software tool that gathers, stores and reports performance and execution metrics for a web-based software installation process. The purpose of this project was to develop a software utility that provides feedback about software download and installation process efficiency. A web-based software installation is...
Resource Type:: Capstone Project
Full Text:: swifter problem resolution and increase product quality. The generator maintains data of appropriate

The use of high pressure process to shuck oysters, reduce microbial load and extend shelf-life

Creator:: He, Haian
Abstract:: Whole oysters were processed under a series of pressures from 30,000 to 45,000 psi at different holding times (0, 1, and 2 min) and then stored at <4°C, for 27 d. During the shelf-life study, the quality of oysters was determined by measuring pH, moisture content, and microbial counts including...
Resource Type:: Masters Thesis
Full Text:: received higher quality scores than the control during the storage trial. Whole oysters were shucked

ScholarsArchive@OSU

Diagnostic analysis for mechanical systems

A comprehensive evaluation of product quality in the Pacific Whiting (Merluccius productus) and Albacore tuna (thunnus alalunga) industries

Multivariate control charts for nonconformities

An experimental study of cost cognizant test case prioritization

Statistical process control part 4: Flowcharts

Statistical process control part 3: pareto analysis and check sheets

Statistical process control. Pt. 5: Cause-and-effect diagrams

Influence of veneer roughness, lathe check, and annual ring characteristics on glue-bond performance of Douglas-fir plywood

Statistics and metrics generator for web-based software installation

The use of high pressure process to shuck oysters, reduce microbial load and extend shelf-life

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search