Heavy timber framing relies primarily on bracing to withstand lateral loads due to earthquakes and wind events. Bracing configurations in heavy timber framed buildings vary widely and include cross bracing, knee bracing, and other geometries. Many heavy timber frames constructed during colonial American times are still standing, exceeding the expected...
Light-frame construction practices and materials have changed greatly
over the past 100 years. Contemporary research has focused on modern construction; thus, we know a great deal about the behavior of modern lightframe buildings under lateral forces. However, there are many light-frame buildings that were built prior to the introduction of...
Hyporheic Exchange Flow (HEF) is driven by head gradients defined by the hydro-topography of the stream surface, which is controlled by the particular geomorphology of the stream. We quantified the impact of large wood, which typically exerts a strong control on stream morphology, on HEF in a second order, low...
The main objective of this research study is to incorporate construction worker safety and health into sustainable design and construction practices. This can be fulfilled by the development of an innovative construction worker safety and health planning tool, called Sustainable Construction Safety and Health (SCSH) Rating System that will:
•...
The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
Metal and hydrogen ion acidity and extreme nitrate concentrations typical of
Department of Energy (DOE) legacy waste sites pose formidable challenges to
successful implementation of in situ bio-immobilization. Intermediate-scale (~ 2.5 m),
flow through models of an in situ bio-barrier were constructed to investigate U and Tc
removal from groundwater...
It is commonly accepted that for the analysis of wood beams, the neutral axis coincides with the centroid of the beam. Although this assumption is used in analysis, wood is not an isotropic material, as it has different elastic properties in the tangential, radial and longitudinal directions, nor is it...
Dissociation between catabolism and anabolism, generically termed “metabolic uncoupling”, has been studied for aerobic cultures of Shewanella oneidensis MR-1. Under conditions promoting metabolic uncoupling, the cell yield diminishes while the substrate utilization rate remains largely unchanged. The effects of excess substrate conditions and TCS addition on the metabolism of pyruvate...
Normal acceleration characteristics of passenger cars provide valuable information for various aspects of transportation engineering, including use in the geometric designs of intersections, freeway ramps, passing lanes, acceleration lanes, turning bays, or in the development of traffic
simulation or fuel consumption models.
However, the data used in previous studies are...
Article 1: Behavior of Epoxy Injected Diagonally Cracked Full-Scale CRC Deck-Girders.
Many cast-in place reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and exhibit diagonal cracking. Epoxy injection has been in use for several decades as a method for sealing diagonal cracks, but the effects on girder behavior...
A generalized, three-dimensional, finite element bridge model was created in order to efficiently and accurately assess live-load girder distribution factors for a variety of bridge types. This model shortens the time required by bridge analysts to develop individual finite element models for bridges of varying geometries. The creation of the...
In recent years confinement requirements for concrete columns have increased in seismic regions. Steel jackets are one way to confine reinforced concrete columns. The increased confinement provides additional strength and ductility for the columns during seismic events. For reinforced concrete columns with steel jackets, there are different section properties in...
In the United States there are currently two different options for providing safety audits to roadway projects. Traditional audits can be conducted using procedures similar to those in the United Kingdom, or those similar to Australia and New Zealand (Austroads). Another option for conducting safety audits is to use the...
Because of the increased need for sustainable construction in an ever urbanizing culture, new sustainable drainage systems are being developed and implemented. Bioswales are becoming
an increasingly popular form of sustainable urban drainage used for parking lots and
subdivisions. But little is known regarding the effectiveness of bioswales in really...
Forest roads produce fine sediment with traffic during wet weather. If the forest road is connected to a stream it can be a source of turbidity and fine sediment that may be detrimental to aquatic organisms especially salmonids.
The goal of this work was to investigate turbid runoff during wet-weather...
The present highway funding system, especially fuel taxes, may become less reliable revenue sources in the future, while the transportation public agencies do not have the sufficient financial resources needed to meet the increasing traffic demand. Regarding the socio-economic impact of road privatization, a wide range of approaches and models...
Because of the increased need for sustainable construction in an ever urbanizing culture, new
sustainable drainage systems are being developed and implemented. Bioswales are becoming
an increasingly popular form of sustainable urban drainage used for parking lots and
subdivisions. But little is known regarding the effectiveness of bioswales in really...
More than 65,000 organic chemicals are currently in commercial production with
approximately 1000 added each year. Many chemicals are released into the environment as organic mixtures derived from complex hazardous or solid wastes. Of these, more than 1000 chemicals are of environmental concern because of their production quantities, toxicity, persistence,...
Crash rates are said to be nearly three times higher on curved sections than those on straight sections of rural roadways. As a result, advisory curve/speed signs are standard practice to mitigate these risks on sharp horizontal curves. The industry standard for determining appropriate and uniform speeds for such signs...
This thesis evaluates pre-construction auditing procedures used in the United Kingdom, Australia, and New Zealand in order to help create post-construction auditing procedures for the state of Oregon. It was funded as part of the development of the Oregon Department of Transportation (ODOT) Safety Investigation Manual, and also evaluates content...
Despite recent efforts to improve site safety, construction still accounts for a disproportionate injury and illness rate. According to the 2007 injury and illness data released by the National Safety Council, the construction industry has a fatality and disabling injury rate that is approximately three times higher than the all-industry...
The educational environment is filled with different types of students, all with diverse learning styles. The Meyers-Briggs Type Indicator and Kolb’s Theory of Experiential Learning are generally accepted methods for determining and assessing a person’s preferred method of information processing. There has been research that suggests learning styles are specific...
While damages due to ponding are common and expensive, provisions for design and
construction of flat roof systems lack guidance regarding these loads. The goal of this research is
to present methods of designing or building flat roofs that are less vulnerable to this condition. An
investigation of the literature,...
Current ACI design provisions for shear in reinforced concrete (RC) beams strengthened
with externally bonded carbon fiber-reinforced polymer (CFRP) U-wraps may not adequately account for the effect of scale. This paper describes tests of 6 geometrically scaled beams to identify possible scale effects of such beams. Results indicated that effective...
As part of a roof framing system, light-frame wood trusses often require lateral bracing to reduce the effective length for flexural buckling of compression web members. This observational research investigates the design requirements for discrete compression web bracing intended to provide such lateral support. Four simple brace analysis methods based...
River regulation imposes changes in the supply of sediment and the frequency of competent flows. As a result, impounded rivers often exhibit downstream changes in channel processes, particle size, and morphology. The magnitude of change in competent flow frequency and sediment load together can be used to predict the pattern...
The overall goal of this study was to evaluate an alternative to
traditional wood framed shear wall construction. This study introduced the
innovative idea of using a water and seismic damage resistant, wood-concrete-
composite (WCC) construction instead of an all-wood design. The
WCC design consisted of a thin shell of...
Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the 1950s, throughout the expansion of the Interstate System. Designs followed the AASHO standard of the time, which permitted higher shear stress in concrete and reduced detailing requirements than permitted by current specifications. Many of these...
Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) U-wraps for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged freeze-thaw cycling. CFRP...
Turkey is an agricultural country where exchange and shipping of goods has been gravely hampered in the past by lack of highways. The railroads have large expanses of land between them, and highway construction in the past has been limited to strategic roads and connections of cities to railways. Unless...
As the traffic demand increases at a faster rate than the upgrade and maintenance of
transportation facilities through the traditional public financing methods in the United
States, the Public-Private Partnership (PPP) is becoming an important supplement to
the public transportation infrastructure investment. There are already several existing
PPP toll road...
Sediment transport in a gravel-bottomed stream located in the Oregon Coast Range was studied to determine the effects of a single
layer of large particles (the armour layer) located at the surface of the bed material. The bed load transport system was studied jointly with suspended sediment transport to understand...
Two hilislope sites in the central Oregon Coast Range were instrumented and monitored for winter precipitation and saturated and unsaturated subsurface conditions. The study sites were near-ridge depressions typically known as headwalls. Based on results of the monitoring, two existing mathematical models
were adapted to predict piezometric levels in headwalls...
As part of a long term study to evaluate the dynamic properties of naturally frozen soils, resonant frequency and cyclic triaxial
tests were conducted on Fairbanks silt samples from the U.S. Army Cold Regions Research and Engineering Laboratory Permafrost Tunnel, Fox, Alaska. The test methods subject right cylindrical test
specimens...
The goal of this study was to develop an understanding of the nature of surge wave loading on
wood framed residential structures for a variety of building configurations and test conditions.
The objectives of the study were: (1) to measure forces on a 1/6th scale wood framed
residential structure, (2)...
This study presents a rational process with supporting data to establish
appropriate road design controls, criteria, and standards for low volume
recreation and resource development. Much of the information presented can
be used to supplement design data presented in a National road design policy
published by the American Association of...
This thesis explores the factors limiting the alkene substrate range of the vinyl chloride (VC)-utilizing bacteria, and describes a method for measuring VC transformation in situ. Vinyl fluoride (VF) was evaluated as a surrogate for monitoring aerobic VC-transformation utilizing three isolates, Mycobacterium EE13a, Mycobacterium JS60 and Nocardioides JS614. JS614 grew...
The Lookout Creek Earthflow is located in the Cascade Mountain
Range in western Oregon. The Cascade Mountains are mainly volcanic
in origin, and deposits in and around the slide have a complex geomorphic
history,, affected by glacial, mass movement, and fluvial
processes. The currently moving land mass is about 1600...
The Steamboat Creek basin drains 227 mi² (588 km²) of steep forested terrain into the North Umpqua River of Southwest Oregon, 39
mi (63 km) northeast of Roseburg. Summer base flows for Steamboat Creek average 83 cfs (2.35 m³/sec). Steamboat Creek and its
tributaries are considered important to the production...
Initially, a small experimental study was undertaken to examine the influence of incline on the frequency of taut cables. The experiments consisted of exciting a short cable at angles of incline from zero to 90 degrees and at various tensions. The results from these experiments shows a small effect due...
Oregon's forestry industry has and will continue to be a vital component of Oregon's economy, with twenty-two percent of Oregon's 1986 gross state product and thirty-nine percent of Oregon's 1986 gross manufacturing product related the forestry goods. An integral component to proper management of Oregon's forestry lands is Sustaining the...
Wave breaking in the surf zone is an important forcing
mechanism on the generation of nearshore currents and in the driving
of sediment transport. At the same time, wave breaking can have
significant spatial and temporal variability that needs to be
accounted for in the description of nearshore processes. Remote...
This research focused on anaerobic transformation of trichloroethene (TCE), a
groundwater contaminant. The mixed anaerobic Evanite culture (EV) was studied to determine community behavior and composition responses to different electron donors and chloroethene electron acceptors. The potential toxicity from high concentrations of TCE and its daughter product cis-1,2-dichloroethene (cDCE) was...
The gasoline tax, the main source of highway revenue is no longer a viable source of
funding to maintain the existing highways. Many states in the United States are
already using revenues from other sources such as sales tax and income tax to fund
new highways. Oregon along with many...
In recent years, log structures have been marketed as an alternative
to conventional light-frame wood structures. Log structures are constructed
using round timbers (or manufactured timbers) that are stacked vertically
and have interlocking corners. Thru-rods and lag screws are used to
provide inter-log connections. This project was conducted to evaluate...
Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged environmental exposure and combined...
A methodology was developed to permit rectification and metrification of digital images of steel truss gusset plate connections. The approach will enable rapid and accurate collection of field measurements as compared to traditional methods to enable structural evaluation of gusset plate connections. The program enables the operator to quickly create...
This research analyzes the effects of islands on river process and the effects river processes have on island formation. A fluvial island is defined herein as a land mass within a river channel that is separated from the floodplain by water on all sides, exhibits some stability, and remains exposed...
Hydrodynamic models are used as a diagnostic tool to understand the temporal variability of shallow-water processes that are difficult to completely resolve with traditional field measurements. For all simulations, modeled quantities are qualitatively or quantitatively compared with available measurements to gain confidence in conclusions derived from the modeled results. In...
Many conventionally reinforced concrete deck girder bridges (RCDG) and their intermediate supporting bent caps were designed during the Eisenhower interstate era of the 1950’s with the AASHO design equations at the time, which subsequently place higher demand on the concrete. The referenced components may exhibit diagonal cracking due to the...
The Horsetail Creek (HC) bridge is an example of an Oregon bridge that was classified as structurally deficient and was not designed to withstand earthquake (EQ) excitations. A fiber-reinforced polymer (FRP) rehabilitation was performed on the HC bridge to increase flexural and shear capacities for traffic loads. However, a seismic...
This study was undertaken to evaluate the spatial and temporal characteristics
of riparian groundwater tables adjacent to beaver ponds. The research was
conducted in two parts; in the first portion a two-dimensional, finite-difference
computer model was developed and utilized to simulate groundwater elevations
through time in pond-adjacent aquifers. Two types...
The City of Salem, Oregon has an active sewer main chemical grouting
program for the control of groundwater infiltration into the sewer collection
system. The effectiveness of this chemical grouting program is evaluated
by a comparison to other effective chemical grouting programs for control
of inflow/infiltration (I/I). The importance of...
Recently, the concept of performance based design has become popular for many types of structures, including port facilities under seismic loading. For the case of pile-supported wharves, the level of performance is generally estimated using the displacement capacity of the structure. Therefore, understanding soil-pile interaction is one of the most...
Ponding of water on roof systems leading to collapse causes expensive damage and jeopardizes the life safety of building occupants. Current building codes and design specifications for flat roof systems offer minimal guidance in designing for ponding loads. The present research investigated ponding load effects on a long span, lightweight...
Aesthetics should be emphasized as much as possible in a design project without
exceeding scope, budget, or schedule to satisfy the stakeholders involved. There
is a rising trend of increased emphasis on aesthetics. This trend of using various
techniques to help structures blend in or contribute to the surrounding
environment...
Cob is an earthen building material composed of sand, clay and straw. Though cob homes
are presently being built in the Pacific Northwest, there is no applicable building code for this
material. The purpose of this study is to establish estimates for the major engineering parameters,
including both average values...
The intent of this thesi s is to prove whether or not simple moving averages can be
used to predict the future price performance of stocks and outperform the buy-and-hold
method of investing in the stock market. The importance of this research is that if moving
averages can predict future...
A new set of data from a large-scale sand bar migration experiment is presented. During this experiment, two sandbars were generated. One of the bar was generated by the action of undertow, and sediment moved offshore. The other bar was generated by the shoreward movement of sediment coming from the...
Numerous research efforts have proven the safety benefits of access management. There are several access management techniques, including unsignalized access spacing, signalized intersection spacing, left-turn lanes, right-turn lanes, Two-Way Left-Turn lanes (TWLTLs), nontraversable median, U-turns, interchange access separation distances and so on.
This project explores the correlation between access density...
The Oregon Department of Transportation (ODOT) standard specifications require a minimum density for the construction of dense-graded hot mix asphalt (HMA) pavements. Currently, the standard specifications call for density measurements for quality control (QC) and quality assurance (QA) testing to be made using nuclear density gauges that are calibrated using...
Due to age, original design that is deficient by modern standards, inadequate maintenance, environmental conditions, and increasing loads, large numbers of bridges in United States and elsewhere are classified as deficient and in need of rehabilitation or replacement. According to a national bridge inventory established by the Federal Highway Administration,...
This thesis is the consequence of a research effort undertaken by the School of Civil and Construction Engineering at Oregon State University and funded by the Oregon Department of Transportation (ODOT) and the Federal Highway Administration
(FHWA). The principal objective of the effort was to reduce the life cycle cost...
Non-destructive testing methods and applications have become of increasing interest due to the worldwide aging and deteriorating infrastructure network. In the field of Civil Engineering, bridges and bridge components as well as non-structural elements such as roadway pavements for example, are affected. In particular, the Acoustic Emission (AE) technique offers...
The evaluation of pavement condition is an important part of pavement
management. To evaluate a pavement, a distress survey has been performed mainly by
manual field inspections. Several automatic pavement evaluation systems have been
developed to overcome the drawbacks of field inspections. Automated evaluation
systems, however, imply their own limitations...
The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the Gypsum Wall Board (GWB). More specifically, the objectives of the study were: (1) to evaluate damage to the GWB in alternative shear wall designs at 1%,...
Use of basalt aquifers for aquifer storage and recovery (ASR) systems is increasing in the Pacific Northwest due to the large aerial extent of the Columbia River Basalt Group and the suitability of basalts as ASR reservoirs. However, the degradation of trihalomethanes (THMs), potentially carcinogenic disinfection by-products present in the...
This work furthers the understanding of processes occurring in catchments that affect stream nitrate concentrations using two different approaches: a temporally intensive case study of three headwater catchments with varying land use (through storm event monitoring) and a spatially intensive study on the regional scale (through statistical modeling) of 1st-4th...
Isolated approaches at signalized intersections with posted speed limits of 45 mph or greater generally experience large numbers of rear-end and angle collisions. A combination of less attentive drivers, high operating speeds, and less than ideal intersection characteristics can result in crash frequencies well above expected rates. A number of...
The rural two-lane highway in the southeastern United States is frequently associated with a disproportionate number of serious and fatal crashes. The major research objectives are to investigate the relations between probabilities of fatal crash type occurrence and potential contributing factors from road geometric design characteristics and roadside, environmental features....
Probability-based reliability methods have placed an increased emphasis on realistic simulation of structural behavior in bridge engineering. Uncertainty is present in every aspect of structural analysis. Aleatory uncertainties in the loading and load-carrying capacities, and epistemic uncertainties in mathematical idealization of bridge systems are the major contributors to uncertain structural...
Many bridges along the Gulf Coast of the United States were damaged by recent hurricanes, and many more are susceptible to similar damage. This research examines performance of common anchorage connection details for AASHTO Type III prestressed concrete girders used by some transportation agencies. Full-scale specimens were fabricated and tested...
This study considered collision data for Seattle, Washington and Portland, Oregon
in order to determine whether or not red light cameras are effective in reducing red light
running collisions. Red light running is extremely dangerous and is a leading cause of
urban automobile collisions in the United States. Red light...
Large numbers of reinforced concrete deck girder bridges that were constructed during the
interstate system expansion of the 1950s have developed diagonal cracking in the stems.
Compared to the present AASHTO-LRFD standards, the provisions of the 1950s allowed
for higher shear stress in the concrete, thus reducing the amount of...
Large numbers of vintage reinforced concrete deck-girder bridges remain in the national bridge inventory. Many of these exhibit diagonal cracking and other distress. Due to the design practices of the time, it is common to observe cracks at locations where flexural reinforcing steel is terminated along the span. The presence...
Originally used as a method to densify loose soils, controlled blasting has expanded its applicability to geotechnical engineering by becoming a research tool to physically generate liquefaction for full-scale in-situ tests, ranging from seismic performance of deep foundations to evaluating ground improvement techniques. Current methods used to design the blasting...
Different specimen preparation methods such as moist tamping, dry funnel deposition, slurry deposition, dry air pluviation have been reported in the literature to investigate the undrained behavior of silty sands. Similarly, different means have been used to densify the soils prepared with such methods. However, the influence of the densification...
In ¬¬¬¬2009 the Federal Motor Vehicle Safety Administration (FMCSA) conducted the “Safety Belt Usage by Commercial Motor Vehicle Drivers Survey” for the National Highway Traffic Safety Administration (NHTSA). The survey found that, nationally, 74% of commercial truck drivers wear their safety belts at all times. In the western region of...
This study explores the influence that the sustainability of hotels has on the choice of hotels. Because of recent concern about global warming and reducing energy consumption, many designers are planning sustainable buildings. But often attractiveness is sacrificed for the goal of making a building sustain in its environment. The...
For wood beams, it is often assumed that the neutral axis is located at the centroid of the
beam. The neutral axis of isotropic, homogeneous materials is located at the centroid of the
material, but wood is neither isotropic nor homogeneous. The varying grain patterns and
knots located throughout wood...
Posting advisory speed signs at sharp horizontal curve locations is a common practice in the U.S. These signs recommend drivers safe speeds to negotiate such curves. Literature indicates that adherence to advisory speeds is, in general, poor. Moreover, limited research is available that quantifies safety implications of these signs. This...
This research focused on the enhanced reductive dechlorination of trichloroethene (TCE) and its surrogate, trichlorofluoroethene (TCFE), using two bioremediation methods in anaerobic conditions. Two anaerobic bioremediation studies were conducted to investigate the effects of microbial communities in the presence of different electron acceptors and donors during anaerobic reductive dechlorination of...
A commercially available, three-dimensional (3-D) finite-element (FE) analysis
program was used to model metal-plate-connected (MPC) joints in wooden trusses.
The model's features included consideration of material properties, teeth-to-grain-to-direction-
of-force orientation, and wood-to-wood contact. Non-linear spring elements,
placed on the wood surface between wood and plate, were used to represent wood-to-teeth...
Metal-plate-connected (MPC) trusses have traditionally been designed based on a
tributary load distribution and a simplified truss model. This design method ignores the
load-sharing and composite action in MPC roof truss systems, the semi-rigidity of MPC
joints, and joint eccentricity.
The main objective of this study was to provide a...
The objective of this research was to evaluate the duration of load factor for
metal-plate-connected (MPC) truss joints subjected to various cyclic loading conditions.
Heel and tension-splice joints from a standard 30-foot span Fink truss constructed from
nominal 2x4 Douglas-fir lumber were tested. A testing frame similar to that developed...
The objective of this research was to develop a one-third scale model of full-size
(prototype) metal-plate-connected (MPC) wood truss joints using similitude theory. The
prototype metal connector plates in MPC joints were modeled using thin galvanized sheet
metal and short staples. Truss grade wood material was ripped to one-third scale...
This study presents a practical method to model an actual Metal-Plate-
Connected (MPC) roof truss assembly using a commercial program, SAP2000, to
investigate its system performance. Truss assembly modeling was examined
because the conventional single truss design method ignores system effects, such as
variability of modulus of elasticity (MOE), interaction...
The objectives of this research were to evaluate the
behavior of actual metal-plate-connected (MPC) tension-splice
and heel wood truss joints under seismic loads from the
Northridge earthquake (tension-splice joints only) and under
loads from a large artificial earthquake (1.0 g's and 0.67
g's maximum horizontal and vertical accelerations,
respectively). A...
Engineering analysis of heavy timber structures under dynamic loads
is generally lacking. Some literature suggests that heavy timber structures
are stiffer than expected, but popular engineering opinion is to the contrary.
In addition, prior research has shown that passive friction dampers can be
used in timber structures for the intended...
Fluid-structure interaction (FSI) is an interesting and challenging interdisciplinary area comprised of fields such as engineering- fluids/structures/solids, computational science, and mathematics. FSI has several practical engineering applications such as the design of coastal infrastructure (such as bridges, levees) subjected to harsh environments from natural forces such as tsunamis, storm surges,...
This dissertation presents the results of a research effort conducted to better understand the stress-strain, volume change, shear band formation, and strength characteristics of normally consolidated anisotropic clay under fully three-dimensional stress states. A series of consolidated drained true triaxial tests with a constant mean effective stress and constant Lode...
The recent increase in awareness of the seismic hazards in Oregon has led to a concern regarding the safety of Oregon State University buildings. While the decision has been made to initiate the seismic rehabilitation of campus facilities, the question of which buildings pose the greatest hazards, and are therefore...
This study investigated complete reductive dechlorination of chlorinated aliphatic hydrocarbons (CAHs) over a broad range of concentrations. Tetrabutoxysilane (TBOS), as a slow-release anaerobic substrate, was studied for enhanced reductive dechlorination of tetrachioroethylene (PCE) present as a dense non-aqueous liquid (DNAPL). Four different site-mixed cultures were used in the study: Site-300...
Alkali-silica reaction (ASR) is one of the leading causes of concrete deterioration throughout the world, and affects both structural and non-structural elements. Despite strong research efforts since its discovery by Stanton in the late 1930s, this deteriorating reaction is still not clearly understood nor are proper preventative measures effectively applied...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
Over the last decade the world has seen three major tsunamis strike the coasts of
Indonesia, Samoa, and Chile. These tsunamis have caused significant losses of life and
property on the coastal cities of these and nearby countries. The NEES (Network for
Earthquake Engineering Simulation) Housesmash project was created to...