This research work focuses on the mechanism of 1/f noise in GaAs
resistors on semi-insulating substrates and 1/f noise due to temperature
fluctuations in heat conduction in resistors, diodes, and bipolar transistors. The
goal of this research is to generate accurate models to explain physical origin of 1/f
noise in...
A radix-based calibration technique was previously proposed with a two-stage algorithmic analog-to-digital converter (ADC). The objective of this work is to verify the capability of radix-based calibration for a true multi-stage ADC. In order to prove the idea, a single bit-per-stage, 20-stage pipelined ADC is designed in a 0.35-μm CMOS...
The passive charge compensation (PCC) technique was introduced for switched capacitor (SC) circuit to increase the slew rate and enhance the linearity performance, as PCC techniques are used on the Delta-Sigma modulator (DSM) in ADC circuitry. The PCC technique of the project was applied to the design of a SC...
As screen resolution and video decoding capability have increased, high-definition (HD) video in resolutions as high as 1920 x 1080 is rapidly becoming the standard. Ad-hoc streaming of HD video over 802.11 wireless networks, e.g., streaming from a mobile device to a television, is convenient for users, but is hampered...
Ring amplification has emerged as an efficient technique to drive large capacitive loads in switched capacitor circuits. We propose circuit techniques to demonstrate the first application of a ring amplifier in a non-capacitive feedback system of a LDO. These techniques enable a simple cap-less LDO structure in 180nm CMOS that...
Dynamic DC offset is one of the biggest problems preventing the implementation of single chip receivers. This thesis presents a 2.4GHz downconversion mixer designed to work with adaptive DC offset cancellation for a fully integrated direct conversion receiver. Offset can be removed by dynamically changing the PFET load bias in...
The increasing demand for higher data-rates is challenging to satisfy with spectrum-deficient indoor WiFi networks. A novel hybrid WiFi Free-Space Optical (WIFO) system has been proposed to enhance the wireless capacity of indoor WiFi networks. In this thesis, an integrated optical wireless receiver is designed and integrated in 65-nm CMOS...
The ability to accurately locate people and objects indoors will enable opportunities for control and automation of indoor environments. Current indoor localization solutions require dedicated hardware which must be custom tailored to each application. There are large technological, societal, and economic benefits in developing a more general purpose system that...
The sensors in real time data processing IoT devices require high resolution and sub-MHz data converters, usually implemented as Incremental ADCs due to the advantages of oversampling technique and low latency. In discrete time incremental (IDT) ADCs, the sampling switch non-linearity, charge injection degrade the resolution, and power hungry OPAMPs...