The Timoshenko beam theory, as an engineering alternative to
the elementary and exact theories, introduces a factor, k', called
the shear coefficient which has been given various interpretations and
values. It is the objective of this study to experimentally evaluate
k' for a brass bar of rectangular cross-section.
Analytical results...
The effects of round, square, and reentrant entrances on flow
regimes and local heat transfer coefficients were determined using a symmetrical,
plane-wall two-dimensional, subsonic air diffuser with one
of the diverging walls heated and maintained isothermal.
Flow and heat transfer studies were made at total divergence
angles ranging from 0...
A program of research has been established at Oregon State
University to study wood residue combustion using an experimental
spreader-stoker combustor. This research was conducted to increase
the understanding of combustion occurring in wood fired boilers.
Using Douglas Fir screened to 3/8-3/4 inches, two 4x4 factorial
experiments were conducted varying...
Wave dispersion and fracture are phenomena that involve. mechanisms triggered at the scale of a material's internal structure. Experiments were performed with a candidate material to judge the hypothesis that wave dispersion measurements can be used to nondestructively predict fracture strength. Wood-based particleboard was chosen as the candidate material because...
Adequate lubrication is of the utmost importance in internal combustion engines. Low temperature operation with low-proof alcohol may create some operational problems if alcohol and or water accumulates in the crankcase oil. Condensates of unburned alcohol and water may be blown into the crankcase oil with blow by gases. The...
This study is primarily concerned with the measurement of the local radiative component of total heat transfer around a horizontal tube immersed in a large particle fluidized bed at elevated temperatures.Total heat transfer was also measured in order to assess the relative radiation contribution.The radiation measurement probe employs a silicon...
The influence of microwave radiation on the fabrication
of cermet materials has been investigated for alumina-titanium
cermets with compositions ranging from 20 to 80 wt. % titanium.
An industrial microwave oven was characterized and adapted to
process cermet materials. Physical and mechanical property
determinations were made as a function of...
The objective of this investigation is the development
of improved techniques for the estimation of robustness for
dynamic systems with structured uncertainties, a problem
which was approached by application of the Lyapunov direct
method. This thesis considers the sign properties of the
Lyapunov function derivative integrated along finite intervals
of...
Recently, fiber-reinforced plastics (FRP lamina) have
been applied to glued-laminated (glulam) timber for the
purpose of improving bending strength and stiffness.
Initially, full length reinforcement using FRP lamina was
developed. However, the cost of FRP lamina is a significant
portion of the total cost of reinforced glulam. Therefore,
it is...