A need exists to develop a non-destructive testing technique that can identify
the formation and propagation of diagonal tension cracks in conventionally
steel reinforced concrete deck girder (RCDG) highway bridges in the State of
Oregon. Such a technique could be included into a structural health
monitoring (SHM) system installed on...
With the miniaturization of microelectronics and increase of processor speeds in the last few decades, thermal management is drastically affecting overall packaging and system capabilities. Due to the special needs introduced, research focusing on microscale cooling has increased. This study combines the positive characteristics of single- and two-phase flows in...
A brake-based wheel speed control system for a rear-wheel drive vehicle is developed and simulated in this thesis. The OSU mini-Baja vehicle team will use this study in the development and implementation of a similar system for upcoming competitions. Vehicle submittals must differ to a specified degree from previous year’s...
Aquatic insect population counts can be a good indicator of the health, or water quality, of rivers and streams. Stoneflies (Plecoptera) are particularly susceptible to pollution in streams. However, today’s current method for obtaining these population counts requires biologists to examine individual specimens under a microscope for identification to the...
A distinct characteristic of legged locomotion is its periodic nature. This periodic motion, in the form of a periodic orbit, has been the target of many walking and running control strategies. The spring loaded inverted pendulum (SLIP) has become a popular model of sagittal plane locomotion, exhibiting behavior characteristic of...
Normal gait of human is believed to be an adapted motor control result of optimal behavior of individual. Normal gait would be altered by aging or injury without being perceived. Subtle changes in gait which is not easy to detect, can cause many serious problems including joint pains and even...
The droplet formation process in the vicinity of the nozzle exit and the behavior of a spreading droplet during impingement on a smooth glass surface were studied. Two nozzle geometries were tested. The first case was a stiff stainless steel nozzle plate 0.787 mm thick. The second case was a...
Extending the flight time of an autonomous unmanned air vehicle by soaring is
considered. A suboptimal controller is developed and successful static soaring is
demonstrated with a 6 degree of freedom glider model. Altitude gain rates of between
¼ and ½ m/s are achieved with this simple implementation.
A hybrid...
Product design is often driven by customer needs and desires. In this case the customer is the US military, and the desire is to have a cooling unit small enough and light enough to incorporate into hazard suits for use in desert combat. The Micro technology-based Energy and Chemical Systems...
Design and preliminarily characterization of two thermally-actuated pumps is presented
in this thesis. The unique feature of both pumps is the presence of periodic asymmetrical
structures on the channel walls. Two heat transfer effects are used with surface
asymmetry to generate forces that drive the fluid in a preferential direction...
Background: Hip replacements are considered routine operations which improve the quality of life in patients by reducing pain and restoring function. There are many variations in prostheses with varying benefits and disadvantages.
Methods: Literature from the United States and Europe was collected on total hip replacements between 2001 and the...
Proper orthogonal decomposition (POD) in conjunction with the Galerkin projection has been used as a model reduction technique for the tractable real-time control of high-dimensional systems. While POD based model reduction may improve the tractability of high-dimensional models, the nonlinear POD based model may be impractical for control due to...
An experimental study of the near-field flow structure produced by an incompressible turbulent Acoustically Self-Excited Jet (ASEJ) in a large enclosure using Particle Image Velocimetry (PIV) is presented. The salient feature of this jet is that it provides an increase in near-field mixing and turbulence without additional external power input....
A large part of low-back pain occurrences are due to disc herniation or prolapse of the nucleus pulposus. An alternative technique to existing treatments of low back pain includes nucleus pulposus replacement by an artificial material to relieve pain and restore normal function. To date, there has been a deficiency...
For piezoelectric stack (PZT) driven droplet generator, the driving waveform
and driving frequency effect on liquid filament shape and droplet characteristics have
been experimentally studied. The experimental study was based on a PZT driven
droplet generator with known geometric design parameters and working fluid
properties. A lumped-element-model (LEM) constructed to...
It is crucial for the development of high quality products that design requirements are identified and clarified as early as possible in the design process. In many projects the design requirements and design specifications evolve during the project cycle. Shifting needs of the customer, advancing technology, market considerations and even...
An experiment was conducted to examine the possible impact of an engineering design and problem solving process overview document on knowledge management and capture. A process overview document was first created. Next, two multi-disciplinary design teams worked over a two-week span to develop concepts to address a problematic opportunity. One...
It is hypothesized that increases in pressure drop due to vapor generation during boiling in microchannels can be reduced by extraction of vapor at its point of inception. Ultimately, this local vapor extraction decreases the pressure drop required to drive the flow through a fractal-like branching, microchannel flow network within...
Students participating in international engineering internships are still relatively rare. It is commonly held that more engineering students would choose to intern abroad if there were role models available, as there are in other disciplines. Profiles of past students, participants, and Alumni serve as role models to perspective students allows...
Oregon Department of Transportation’s bridge no. 9743b is a multi-span, two-girder steel deck bridge connecting the busy interstates 5 and 205. Vertical cracks have been detected in the welded girder-to-crossbeam connections at the bents. Distortion-induced fatigue is suspected to be responsible for the cracking. Linear elastic beam analysis, 2-D and...
Air travel presents several problems for passengers with disabilities.
One in particular is how they get from their wheelchair and to an aircraft seat.
The commonly used manual transfer method is hazardous to the assistants
and the passenger. There are other alternatives, but they have plenty of room
for improvement....
People often grow increasingly culturally confused when spending significant amounts of time in a foreign land. Identity can become lost only to reform in the image of the host society. This thesis presents a creative nonfiction series of essays that explore the author’s loss of self and contextual identity, the...
An experimental study of absorption of ammonia into a constrained thin film of ammonia-water solution is presented. A large aspect ratio microchannel with one of its walls formed by a porous material is used to constrain the thickness of the liquid film. Experiments were performed at a pressure of 1,...
Driven by the need for high energy-density power sources, demand has
stimulated the development of small-scale engines. A small-scale engine
with a fuel supply could replace batteries and utilize higher energy-density
liquid hydrocarbon fuels; such an advance could deliver a new age of
portable devices. Currently, operable small-scale engines exist;...
Droplet formation from a flexible nozzle plate driven by a prescribed-waveform excitation of a piezoelectric is numerically investigated using a computational fluid dynamics (CFD) model with the VOF method. The droplet generator with a flexible nozzle plate, which is free to vibrate due to the pressure acting on the plate,...
Transportation plays such an important role in daily living that, without it, a person might be totally homebound. The nation’s air travel system for persons with disabilities is an area of substantial dissatisfaction, with both passengers and the airline industry recognizing the need for improvement. One of the major concerns...
A PID controller was designed to control the performance of an oil-heated fractal-like branching microchannel desorber for use in an ammonia-absorption refrigeration system. Both the amount and concentration of ammonia refrigerant generated at the desorber can be controlled by choosing the rectified circulation ratio as the controlled variable in a...
The behavior of a metal vapor plasma arc in a vacuum arc remelting (VAR) furnace is believed to contribute to the formation of defects in reactive metal and super-alloy ingots. Industry standard instrumentation, which includes electric current and voltage measurements, can asses the stability of an arc but cannot predict...
A Mixed Reactant Single Chamber (MRSC) Fuel Cell is a relatively recent concept in the field of fuel cell engineering originally developed in the late 1950’s. Typical fuel cells have separated reactants (a separated fuel and oxidizer) that react on their usually non-selective electro-catalytic materials. A mixed reactant fuel cell...
Coordinating multiple robots to achieve a complex task requires solving two distinct control problems: the high-level control problem of ensuring that each robot aims to perform a useful task (e.g., coordination) and the low-level control problem of ensuring that each robot actually performs the correct actions to achieve its task...
A non-intrusive measurement technique for direct quantitative thermal visualization of channel wall temperatures in two phase microchannel flows using infrared thermography (IRT) is presented. Specifically, the measurement of top channel wall temperatures in a fractal-like branching microchannel silicon heat sink during flow boiling is demonstrated and thoroughly documented. Obtaining quantitative...
Introduction Over the past century, great technological advances have enabled high-speed communication and transportation across the globe. This technology trend combined with the needs of continuous expansion of market place has motivated major corporations not to restrict their business activities to within a single principality. Engineering design activities can take...
Flow separation is an important phenomenon in fluid dynamics because of the effect it has on lift and drag on immersed bodies. Areas of swirl within a separated flow region may have a distinct effect on the surface forces, modifying the lift and drag characteristics. A correlation between the passage...
Identification and population counts of soil mesofauna can be an
important tool for soil ecologists to determine the soil biodiversity. Information
provided from population counts can give insight to soil ecologists about the
effects of human land use, monitoring soil and water health, benefits of soil
biodiversity in agriculture, and...
In many composites, fiber bridging develops as part of the fracture process. Fiber bridging invalidates many toughness evaluation methods such as the ASTM E399 and complicates the identification of crack length, which is a necessary parameter in energy methods. In order to measure the toughness of fiber bridging composites, an...
Field biologists are in need of more specialized and technical equipment than they are able to produce on their own in order to collect data more efficiently or gather data that is not currently available. This presents a challenge for design engineers because these products are typically highly specialized and...
An experimental study of thermally actuated pumping of a single-phase, single-component fluid is presented in the context of thermal management of a heat source. The prominent feature of this pumping method is that the very heat that is to be removed from the heat source causes a net fluid motion....
Based on experimental investigations the present study evaluates flow instability and
void fraction in a fractal-like branching microchannel network with rectangular cross-section. The hydraulic diameter of the channels ranged from 308μm at the inlet to 143μm at the outlet. The flow network used is characterized by set branching ratios for...
Two-phase gas-liquid flows in microscale fractal-like branching channel flow networks were experimentally studied to assess the validity of existing void fraction correlations and flow regimes based on superficial gas and liquid velocities. Void fractions were assessed using two different methods. First, void fraction data were acquired using a High-Speed-High-Resolution (HSHR)...
The current proliferation of portable electronic devices for personal
communication, business and entertainment has created a demand for high energy density
power supplies. A hydrocarbon fuel with a conversion efficiency of over
15% can provide greater energy density than current battery technology for these
applications. Current micro-scale heat engines do...
The thermal wave technique has been explored for the use of liquid thermal conductivity measurement and flow property diagnostics in this dissertation. For liquid thermal conductivity measurements, an experimental technique based on the thermal wave approach is developed. A stainless steel strip functions as both a heating element and a...
A particle image velocimetry system was established to determine flow fields in low Reynolds number flows through a branching flow network. Due to the fabrication procedure of the test device, flows were limited to a Reynolds number of 1.5 in the largest channel. Data was acquired at each channel inlet,...
An optical diagnostic system capable of measuring angular displacements in a torsionally loaded shaft through noncontact means has been developed. Conventional
torsion diagnostic mechanisms must come in contact with the shaft to be analyzed. The signal-to-noise ratio response of conventional systems is compromised by dirt and wear. Another consequence of...
A one-dimensional numerical model has been developed to study diabatic and adiabatic
flow boiling in microchannels. This model accounts for developing flow effects and
variable property effects. The model uses correlations for void fraction and two-phase
multipliers found in the literature. The model has been used to study the performance...
A hypothesis used to explain the relationship between timber harvesting
and landslides is that tree roots add mechanical support to soil, thus increasing
soil strength. Upon harvest, the tree roots decay which reduces soil strength and
increases the risk of management -induced landslides. The technical literature
does not adequately support...
Risk is a crucial decision factor besides traditional cost and performance during collaborative decision making in a distributed environment. Three main challenges exist: 1) stakeholders' different perspectives and/or diverse cultures can lead to inconsistent risk probability evaluations; 2) risk consequence is hard to be quantified in concrete unit; 3) risk...
At the start of the 21st century much of the focus of aircraft design has been turned to unmanned aerial vehicles (UAVs) which generally operate at much lower speeds in higher risk areas than manned aircraft. One subset of UAVs are Micro Air Vehicles (MAVs) which usually are no larger...
An experimental study was performed to investigate the effect of
flow channel geometry on fully developed turbulent flow in "clean" rod
bundle flow channels. This information was sought to obtain a better
understanding of crossflow mixing between rod bundle subchannels. The
experiments were performed in water with a Reynolds number...
Mechanical design is often based on formal methodologies such as Quality Function Deployment. Techniques to quantitatively account for attractability, sensory perception, and affective design have been successfully incorporated into these methods and are receiving growing acceptance across many industries. Although the adoption of these methods marks a large improvement for...