Index Catalog // ScholarsArchive@OSU

Electronic instrumentation for measuring detonation in spark and compression ignition engines

Creator:: Hanley, William Vincent
Resource Type:: Masters Thesis
Full Text:: of making use of the electronic devices which have been developed within the past few years for

A comparative study of the performance of pin finned heat sinks for cooling electronic components by natural convection

Creator:: Manolescu, Mircea Ion
Abstract:: A study was conducted to determine the heat transfer characteristics of pin finned heat sinks in natural convection. Three pin diameters were studied: 0.238 cm, 0.318 cm and 0.396 cm. The pins were attached to the base in two arrangements, triangular and rectangular, forming a horizontal array. Pin spacing was...
Resource Type:: Masters Thesis
Full Text:: rectangular fins. A Comparative Study of the Performance of Pin Finned Heat Sinks for Cooling Electronic

Numerical analysis of liquid cooling by natural convection for heated protusions simulating vertical plate-mounted electronic components facing an opposing plate

Creator:: Park, Sung-kwan
Resource Type:: Dissertation
Full Text:: dielectric cooling liquids 68 5.2 Solid properties of selected heated arrays (electronic package) and plates

Potential of Genetic Algorithms for Design of Liquid Cooled Heat Sinks Fabricated Using Additive Manufacturing

Creator:: Dokken, Connor B.
Abstract:: The advancement of new manufacturing techniques such as additive manufacturing enable significantly greater freedom of design compared to conventional techniques. Of significant interest is what improvements could be made in the design of cold plates and heat sinks for electronics cooling. Greater design freedom could potentially enable new designs that...
Resource Type:: Masters Thesis
Full Text:: heat sinks/spreaders are cost effective, allow reduction of electronic packaging height and eliminate

A study of micro-scale, fractal-like branching flow networks for reduced pumping power and improved temperature uniformity

Creator:: Alharbi, Ali Y.
Abstract:: A first generation, one-dimensional predictive model is proposed for designing heat sinks with fractal flow networks. A three-dimensional computational fluid dynamics (CFD) model is analyzed as a means for validating the model and identifying areas for improvement. Two separate CFD models were developed. One was analyzed with conjugate heat transfer...
Resource Type:: Masters Thesis
Full Text:: energy outputs leading to very high power densities. For these reasons, thermal management of electronic

Experimental study of subcooled water spray cooling using flow symmetric micro-structured surfaces

Creator:: Tulchinsky, Alex M.
Abstract:: Spray impingement cooling has been shown to be a leading candidate for future high heat flux cooling applications. In general, spray cooling curves consist of three heat flux regimes; single-phase, two-phase and critical heat flux (CHF). CHF is considered the design limit for almost all two-phase cooling applications, as a...
Resource Type:: Masters Thesis
Full Text:: management of electronic devices. Spray cooling of electronics is still a developing technique but is

Single Phase and Flow Boiling Heat Transfer and Flow Characterization in Microscale Pin Fin Heat Sinks

Creator:: Rasouli, Erfan
Abstract:: The ever increasing requirements for heat dissipation in various thermal management applications such as computer chip cooling and high power electronics have necessitated the need for novel thermal management techniques. Thermal management using heat sinks with microscale features is amongst the prominent techniques developed over the past two decades. In...
Resource Type:: Dissertation
Full Text:: Characterization in Microscale Pin Fin Heat Sinks AN ABSTRACT OF THE DISSERTATION

A technique for spatially resolved wall temperature measurements in microchannel heat sinks using infrared thermography

Creator:: Krebs, Daniel P.
Abstract:: A non-intrusive measurement technique for direct quantitative thermal visualization of channel wall temperatures in two phase microchannel flows using infrared thermography (IRT) is presented. Specifically, the measurement of top channel wall temperatures in a fractal-like branching microchannel silicon heat sink during flow boiling is demonstrated and thoroughly documented. Obtaining quantitative...
Resource Type:: Masters Thesis
Full Text:: overall miniaturization of electronic components and a near exponential growth in required heat flux

Laminar microchannel cooling of integrated circuits

Creator:: Lienau, Jeffrey Jay
Abstract:: Liquid cooled, laminar microchannel heat sinks were earlier proposed by Tuckerman for cooling high heat generating integrated circuits and high power microwave generation systems using photoconductive switches. A method of computationally analyzing the heat sinks is presented which produces the desired temperature and velocity distributions within the heat sinks. The...
Resource Type:: Masters Thesis
Full Text:: the electronic devices predicted in references [2] and [3]. Incropera has prepared a summary of some

Microscale thermal management utilizing vapor extraction from a fractal-like branching heat sink

Creator:: Apreotesi, Mario A.
Abstract:: It is hypothesized that increases in pressure drop due to vapor generation during boiling in microchannels can be reduced by extraction of vapor at its point of inception. Ultimately, this local vapor extraction decreases the pressure drop required to drive the flow through a fractal-like branching, microchannel flow network within...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Mario A. Apreotesi for the

ScholarsArchive@OSU

Electronic instrumentation for measuring detonation in spark and compression ignition engines

A comparative study of the performance of pin finned heat sinks for cooling electronic components by natural convection

Numerical analysis of liquid cooling by natural convection for heated protusions simulating vertical plate-mounted electronic components facing an opposing plate

Potential of Genetic Algorithms for Design of Liquid Cooled Heat Sinks Fabricated Using Additive Manufacturing

A study of micro-scale, fractal-like branching flow networks for reduced pumping power and improved temperature uniformity

Experimental study of subcooled water spray cooling using flow symmetric micro-structured surfaces

Single Phase and Flow Boiling Heat Transfer and Flow Characterization in Microscale Pin Fin Heat Sinks

A technique for spatially resolved wall temperature measurements in microchannel heat sinks using infrared thermography

Laminar microchannel cooling of integrated circuits

Microscale thermal management utilizing vapor extraction from a fractal-like branching heat sink

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search