Index Catalog // ScholarsArchive@OSU

Airborne sampling of particles emitted to the atmosphere from Kraft paper mill processes and their characterization by electron microscopy

Creator:: Augustine, Frank Edward
Abstract:: A high volume sampling system, employing Nuclepore filters and designed for sampling particulate in the plumes from industrial sources using a light aircraft, is described. The effluent of kraft paper mills was sampled using this system and then analyzed by electron microscopy. Size distributions of particles were obtained at several...
Resource Type:: Dissertation
Full Text:: THESIS OF FRANK EDWARD AUGUSTINE for the DOCTOR OF PHILOSOPHY (Name) (Degree) in MECHANICAL ENGINEERING

A numerical solution for heat transfer to non-Newtonian fluids with temperature-dependent viscosity for arbitrary conditions of heat flux and surface temperature

Creator:: Cochrane, G. F. (Glenn Frank)
Resource Type:: Dissertation
Full Text:: AN ABSTRACT OF THE THESIS OF GLENN FRANK COCHRANE, JR. for the Ph. D. (Name) (Degree) in MECHANICAL

Synthetic Lubricant Performance in Enclosed Gearbox Applications at Extreme Temperature

Creator:: Marr, Carter J.
Abstract:: The goal of this paper is to evaluate how synthetic lubricants perform in an enclosed gearbox application when compared with a proven mineral oil. This is in an effort to improve gearbox efficiency with the desired effect of lower emissions from of improved energy output from power generation. Four liquid...
Resource Type:: Masters Thesis
Full Text:: Lubricant Performance in Enclosed Gearbox Applications at Extreme Temperature Abstract approved: John

Further Development of MPM and its Applications in Modeling Wood-Adhesive Bonds

Creator:: Hammerquist, Chad C.
Abstract:: This work is a culmination of a series of published works related to the use of the Material Point Method (MPM) in modeling wood adhesive bonds. The use of wood as construction material has the potential to play a small role in the solution to the current CO2 and climate...
Resource Type:: Dissertation
Full Text:: Abstract approved: John A. Nairn This work is a culmination of a series of published works related to the

Internment at Santo Tomas University, a Podcast

Creator:: Atwood, Ryan A.
Abstract:: The Santo Tomas University Internment Camp Podcast tells the story of a prison camp run by the Japanese in the Philippines during World War Two, told through a scrapbook created by two internees named Frank and Mildred Miles. Consisting of two parts, an academic portion which focuses on the historical...
Resource Type:: Honors College Thesis
Full Text:: during World War Two, told through a scrapbook created by two internees named Frank and Mildred Miles

A computer imaging method for fluid motion studies in metal casting

Creator:: Poland, John H.
Abstract:: Significant reductions in the number of defects in parts produced by investment casting can be obtained by improving the flow of the molten metal during pouring. Studies have been done at Oregon State University with simulated casting techniques to determine optimal mold configurations. Better mold layouts have been shown to...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF John H. Poland for the degree

Evaluation of horizontal axis wind turbine blade loads using unsteady aerodynamics

Creator:: Hartin, John R.
Abstract:: Most existing analyses of the blade loads on horizontal axis wind turbines are conducted using linear steady-state aerodynamics, but evaluation of loads resulting from wind turbulence or gusts may not be adequate using these techniques. This study develops single-parameter approximations for both the shed wake and trailing wake components of...
Resource Type:: Dissertation
Full Text:: using unsteady aerodynamics AN ABSTRACT OF THE THESIS OF John R. Hartin for the degree of Doctor of

Investigation of volumetric coupling effects on particle-laden turbulent flows at dilute to moderate loadings

Creator:: Cihonski, Andrew John
Abstract:: Particle-laden turbulent flows are of great importance in many industrial applications and are sufficiently complex to require multiple methods of study to provide a better understanding of the dominant physical mechanisms present in these processes. This work on large-eddy simulation of particle-laden flows seeks to help provide the building blocks...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Andrew John Cihonski for the degree of

Dislodgement and deformation of microbubbles in laminar channel flow

Creator:: Tence, David A.
Abstract:: In this thesis the critical parameters involved in the dislodgement and deformation of microbubbles in laminar channel flow, are determined and evaluated. Experimentally the effects of surface tension, viscosity, fluid flow rate, density, and bubble diameter on bubble dislodgement were evaluated. A theoretical scale analysis was performed which provided a...
Resource Type:: Masters Thesis
Full Text:: were generated of Weber number, at bubble dislodgement, versus Reynolds number and Weber number as a

Adaptive Multiagent Traffic Management for Autonomous Robotic Systems

Creator:: Rebhuhn, Carrie
Abstract:: There is growing commercial interest in the use of unmanned aerial vehicles (UAVs) in urban environments, specifically for package delivery applications. However, the size, complexity and sheer numbers of expected UAVs makes conventional air traffic management that relies on human air traffic controllers infeasible. To enable UAVs to safely and...
Resource Type:: Dissertation

ScholarsArchive@OSU

Airborne sampling of particles emitted to the atmosphere from Kraft paper mill processes and their characterization by electron microscopy

A numerical solution for heat transfer to non-Newtonian fluids with temperature-dependent viscosity for arbitrary conditions of heat flux and surface temperature

Synthetic Lubricant Performance in Enclosed Gearbox Applications at Extreme Temperature

Further Development of MPM and its Applications in Modeling Wood-Adhesive Bonds

Internment at Santo Tomas University, a Podcast

A computer imaging method for fluid motion studies in metal casting

Evaluation of horizontal axis wind turbine blade loads using unsteady aerodynamics

Investigation of volumetric coupling effects on particle-laden turbulent flows at dilute to moderate loadings

Dislodgement and deformation of microbubbles in laminar channel flow

Adaptive Multiagent Traffic Management for Autonomous Robotic Systems

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search