A series of TiNbHf alloys ranging from 0-40 atomic %
Nb and 0-15 atomic % Hf were evaluated to investigate
low-elastic modulus phenomena which occur in this ternary
system. The desirability of utilizing corrosion-resistant, biocompatible alloys with elastic modulus values
approaching that of human bone for medical prosthetic
implants provides...
Mechanical properties of Nb-Ti composite superconducting wires were tested at
room temperature. The results were analysed using simple composite theory, the rule
of mixtures. The objective is to predict the mechanical properties of Nb-Ti
superconducting composite wires as a function of volume ratio and geometry of the
components, the composite...
Measurement of the copper to superconductor ratio (Cu/SC) in
composite superconducting wires is necessary for process control, quality
assurance, and characterization of the final wire properties.
A comparison has been made of three techniques for measuring the
Cu/SC ratio on a set of commercial wires produced for the Superconducting
SuperCollider...
A calorimeter capable of measuring the heat capacity of 1 mg size samples from
4.2 to greater than 100 K has been designed, constructed, and tested. The sample is
bonded to the end of a 0.002 inch diameter, 0.5 cm long chromel-constantan
thermocouple (type E) and heated optically with a...
It is well established that the extended range V(I) transition behavior in
filamentary superconducting composites depends strongly on the processing
conditions of the composite. Based on previous work, a model proposed by
Warnes et al predicts that the second derivative of the V(I) transition is related to
a more fundamental...
Recent superconducting thin films studies have attempted to create pure metal layer films of Niobium and Titanium with the same properties of superconducting NbTi wire used in industry. These studies have all reported depression of the superconducting properties of the pure metal films which has been attributed to the proximity...
The metallurgy and superconductivity of the Nb-Ti-Ta ternary alloy system were studied. The Nb-Ti, and Ta-Ti binary samples, and Nb-Ti-Ta ternary samples were precipitation heat treated under different schedules. After the precipitating heat treatment, the samples were characterized by X-Ray Diffraction (XRD) techniques. Equilibrium binary and ternary phase diagrams based...
A steady state, axial flow thermal conductivity test apparatus was designed and constructed to operate between room temperature and approximately 4 Kelvin, and to be compatible with existing electronic instrumentation and a continuous flow cryostat. The test design included a radiation shield that had its temperature profile matched to that...